SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 01
www.cobra.it
PETROL
VOLVO S 40 * 04 DIESEL

MAKE MOD. YEAR
X
* Models with original equipment keyless entry system.
ALARM/SIREN Position the compact alarms and the sirens on the support of the shock absorber, in the
engine compartment, passenger s side.
POSITION
Pass the cables using the original fairlead located behind the passenger s side glove
compartment.
Position the modular sistems and the modules under the dashboard, passenger s side.
CENTRAL UNIT POSITION
POWER SUPPLY +30: connect to the 2 mm2 RED wire located in the wiring harness coming out of the green
connector, in the fuse box.
-31: connect to one of the ground terminals located behind the left lateral bulkhead, driver s
side.
IGNITION WIRE +15/54: connect to the WHITE/GREEN wire, in the wiring harness coming out of the
connector of the ignition key.
DIRECTION INDICATORS Connect to the wires: LIGHT BLUE and LIGHT BLUE/RED in the brown connector located in
the lower part of the fuse box.
ACTIVAT./DEACTIVATION Connections antitheft/vehicle
CONTROLS Art. 3800 Vehicle Position
YELLOW/BLACK WHITE/BLACK Connector central of the electric windows motor
GREY/BLACK YELLOW/BLACK Connector central of the electric windows motor
VIOLET YELLOW/BLACK Original open/close push-button
ORANGE RED/BLACK Original open/close push-button
VIOLET/WHITE Ground Car body
ORANGE/WHITE positive Supply in the fuse box
The connector of the window motor central is located inside the driver s side door.
Refer to the  C diagram in the dedicated installations manual inside the kit of the antitheft.
IMMOBILISATION POINT Gasoil pump
Cut the WHITE/GREEN wire, at the position nr.3, in the wiring harness comig out of the
connector of the ignition key.
STARTER +50: Cut the GREY/BLACK wire, at the position nr.2, in the wiring harness coming out of the
connector of the ignition key.
BONNET SWITCH Install an additional switch on the headlamp support plate, driver s side.
DOORS SWITCH Connect to the BLACK wire in the wiring harness coming out of the connector of the lamp
located under the driver s side dashboard.
BOOT SWITCH Connect to the BLACK/LIGHT BLUE wire in the wiring harness coming out of the connector of
the boot lamp.
vos4004gbdtr1.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.