Requirements:
Partitions-First one should be Fat32 primary, and the second ext4 Primary (Gparted LiveCD recommended)
Wipe recommended on first install [Only scenario where it is not required is when you were already on Sibere's ext4 Data2Sd on another Sense Rom]. (If you're reinstalling my rom again, you dont need a wipe)
A Class 4 or above SD card is recommended for Data2sd. If you use Class 2, you may notice a perceptible lag.
Instructions:
Installation
for the first time:
1.
Full Wipe is necessary when installing for the first time (Backup
your data in both recovery and Titanium before installing)
2.
Partition your sd card into two partitions-The First is Fat32, and
the second should be ext4 (For Data2SD) [Ext4
is needed]
3.
Install the Rom zip from recovery
4.
Boot once, allow system to stabilize. At this point you will be
having a simple Non A2SD, Non Data2SD setup
5.
Reboot into recovery once more, run the Data2sdInstaller.zip
6.
Reboot into your system and enjoy the stablest Data2SD experience
ever
Reinstallation
after reflashing the rom for any purpose like removing system apps
and widgets:
This
should be done only if you have run the Data2SD installer zip at
least once previously and havent wiped your sd-ext after that
Flash the base rom after removing any apps/widgets you dont want (Removing system apps is always tricky with any Sense rom and may cause boot loops/force closes of its own)
Immediately after flashing the rom, install the Reinstaller zip. (Note that this this is to be done immediately after flashing the main rom and not after a reboot)
Note:
Turn signature verification off in Recovery menu before running the
installer script. (If
you dont know how, see this post)
Caution:
Avoid
pulling the battery while the system is running. Data2sd saves
everything safely at shutdown, so such unexpected reboot can lead to
Data loss.