SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
X
MAKE
MITSUBISHI
MOD.
CARISMA*
YEAR.
01 âÄ…Å‚ PETROL
DIESEL
* Models with original equipment keyless entry system.
ALARM/SIREN
Position the compact alarms and the sirens on the servobrake support, in the engine POSITION
compartment.
CENTRAL UNIT POSITION
Position the modular systems and the modules under the driver’s side dashboard.
POWER SUPPLY
+ 30: connect to the WHITE wire located in the wiring harness coming out of the central doors locking unit placed under the central consolle.
- 31: connect directly to the car body.
IGNITION WIRE
+ 15/54: connect to the BLUE wire in the wiring harness coming out of the connector of the central doors locking unit located under the central consolle.
DIRECTION INDICATORS
Connect to the GREEN/RED and GREEN/BLACK wires located in the wiring harness coming out of the connector of the central doors locking unit placed under the central consolle.
ELECTRIC WINDOWS
Positive control signal
Front window, driver’s side:
Cut the GREEN/RED wire located in the wiring harness coming out of the original switch.
Front window, passenger’s side: Cut the RED/YELLOW wire located in the wiring harness coming out of the driver’s side door.
Rear window, driver’s side:
Cut the YELLOW/RED wire with SILVER reference located in the wiring harness coming out of the driver’s side door.
Rear window, passenger’s side: Cut the WHITE/RED wire with SILVER reference located in the wiring harness coming out of the driver’s side door.
ACTIVAT./DEACTIVATION
Connections antitheft/vehicle
CONTROLS
38XX Vehicle Position YELLOW/BLACK BLUE/WHITE (motor) central doors locking unit GREY/BLACK BLUE/BLACK (motor) central doors locking unit VIOLET GREEN/RED (BLK) central doors locking unit ORANGE ground car body VIOLET/WHITE ground car body ORANGE/WHITE ground car body The connection must be done in the wiring harness coming out of the connector of the central doors locking unit located under the central consolle.
IMMOBILISATION POINT
Central locking
Cut the BLACK/WHITE wire located in the wiring harness coming out of the connector of the central unit, behind the driver’s side loudspeaker.
STARTER
+ 50: Cut the BLACK/YELLOW wire located in the wiring harness coming out of the connector of the ignition key.
BONNET SWITCH
Install an additional switch on the front headlamp support plate, driver’s side.
DOORS SWITCH
Connect to the RED/GREEN wire with SILVER references located in the wiring harness under the driver’s side sill cover.
BOOT SWITCH
Connect to the RED/GREEN wire with BLACK reference located in the wiring harness coming out of the boot lamp.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed micar01gbbt.doc
as per the instructions given on the product installation manual.
Wyszukiwarka
Podobne podstrony:
MICAR01GBDT id 2491146 NieznanyMIL2098GBD id 2491149 NieznanyCISAX01GBD id 2064757 NieznanySGH 2200 id 2230801 Nieznany111003105109 stress id 2048457 NieznanyCIXS201GBD id 2064760 NieznanyTOCEL96GBB id 2491297 Nieznany1078 2 FEA209544 128UEN A id 22 NieznanyMcRib(r) Sandwich id 2201097 NieznanyBD V600 L3 C A3 V1[1] 1 id 2157 NieznanyDOC0534 id 2032985 Nieznany8 17 id 2009842 NieznanyREKAN02GBBT id 2491218 Nieznanycialo albatros id 2035175 Nieznany[17] FR540NT010 id 2085454 NieznanyRO7503GBDT id 2491245 NieznanyVOLUP98GBD id 2134841 Nieznanywięcej podobnych podstron