SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
X
MAKE
VOLKSWAGEN MOD.
POLO
YEAR.
00 âÄ…Å‚ PETROL
DIESEL
ALARM/SIREN
Position the compact alarms and the sirens in the engine compartment, on the POSITION
shock absorber, driver’s side.
CENTRAL UNIT POSITION
Position the modular systems and the modules on the left, under the dashboard, driver’s side.
POWER SUPPLY
+ 30: connect to the 4 mm2 RED wire located in the multiway connector in the fuse box.
- 31: connect with a cable terminal directly to the car body.
IGNITION WIRE
+15/54: connect to the 1,5 mm2 YELLOW/RED wire located in the brown connector, on the support of the connectors holder, behind the fuse box.
DIRECTION INDICATORS
Connect to the BLACK/GREEN wire at the position nr. 1 in the 10 way black connector and to the BLACK/WHITE wire at the position nr. 8, in the 10 way light blue connector located on the support of the connectors holder, behind the fuse box.
ELECTRIC WINDOWS
Comfort closing
Positive control signal The closing of the windows is obtained timing the WHITE/YELLOW doors closure wire coming out of the driver’s side door.
CENTRAL DOORS LOCKING Positive control signal Connect to the WHITE/YELLOW wire (lock) and to the WHITE/GREEN wire (unlock) located in the wiring harness coming out of the driver’s side door.
IMMOBILISATION POINT 1
Fuel pump
Cut the 2 mm2 YELLOW/RED wire located in the taped wiring harness behind the sill cover, driver’s side.
STARTER
+50: Cut the 2,5 mm2 RED/BLACK wire located in the wiring harness coming out of the connector of the ignition key.
BONNET SWITCH
Install an additional switch on the front headlamps bulkhead, near the original bonnet bumper rubber.
DOORS SWITCH
Connect to the BROWN/WHITE wire at the position nr. 3, in the 10 way black connector located behind the sill cover, driver’s side.
BOOT SWITCH
Connect to the BROWN/RED wire located in the wiring harness coming out of the boot lamp.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed vopol00gbb.doc
as per the instructions given on the product installation manual.
Wyszukiwarka
Podobne podstrony:
VOSHA01GBB id 2134859 NieznanyVOPAS01GBD id 2134851 NieznanyCISAX01GBD id 2064757 NieznanySGH 2200 id 2230801 Nieznany111003105109 stress id 2048457 NieznanyCIXS201GBD id 2064760 NieznanyTOCEL96GBB id 2491297 Nieznany1078 2 FEA209544 128UEN A id 22 NieznanyMcRib(r) Sandwich id 2201097 NieznanyBD V600 L3 C A3 V1[1] 1 id 2157 NieznanyDOC0534 id 2032985 Nieznany8 17 id 2009842 NieznanyREKAN02GBBT id 2491218 Nieznanycialo albatros id 2035175 Nieznany[17] FR540NT010 id 2085454 NieznanyRO7503GBDT id 2491245 NieznanyVOLUP98GBD id 2134841 Nieznanywięcej podobnych podstron