Select a port in the list below, then validate your selection. Choisissez un port dans la liste ci-dessous, puis validez votre sélection, puis validez votre sélection. Select a port in the list below, then validate your selection.
NONE : Use a USB-Diag interface for K and DiagOnCAN ECU, you need to select interface.
COMx : Use Serial COM port for K ecu and National Instrument for DiagOnCAN ECU
NONE : Utilisation d'une interface USB-Diag interface pour les UCE K et DiagOnCAN , Vous avez besoin d'indiquer l'interface.
COMx : Utilisation du port serie COMx pour les UCE K et d'une carte CAN National Instrument pour les UCE DiagOnCAN
NONE : Use a USB-Diag interface for K and DiagOnCAN ECU, you need to select interface.
COMx : Use Serial COM port for K ecu and National Instrument for DiagOnCAN ECU
USB port Port USB USB port
View the list of USB Diagnostic interfaces on this computer (Diagnostic USB driver must be installed)
Voir la liste des interfaces USB de cet ordinateur (Driver USB Diagnostic installé nécessaire)
View the list of USB Diagnostic interfaces on this computer (Diagnostic USB driver must be installed)
IMPORTANT
If you don't have the Diagnostic USB driver on your PC...
1 - copy those two files in a directory (driver files)
RENBUsb.inf RENBUsb.sys
2 - plug USB-DIAG interface in PC USB port 3 - windows asks for a driver...select the folder (where driver files where copied) 4 - install is finished 5 - go to DDT2000 first page an click on PLAYER to register the server (if not already done)
Si vous n'avez pas le driver USB diagnostic installé...
1 - copier ces deux fichiers dans un répertoire (fichiers driver)
RENBUsb.inf RENBUsb.sys
2 - connecter l'interface USB-DIAG au port USB du PC 3 - windows recherche le driver...selectionner le répertoire (oÅ‚ se trouve les fichiers copiés) 4 - l'installation est terminée 5 - aller sur la premiÅre page de DDT2000 et cliquer sur PLAYER pour enregistrer le serveur (si cela n'est pas dÅjÄ… fait)
If you don't have the Diagnostic USB driver on your PC...
1 - copy those two files in a directory (driver files)
RENBUsb.inf RENBUsb.sys
2 - plug USB-DIAG interface in PC USB port 3 - windows asks for a driver...select the folder (where driver files where copied) 4 - install is finished 5 - go to DDT2000 first page an click on PLAYER to register the server (if not already done)
National Instrument CAN Interface Only if you have installed NI-CAN software Version 1.5 or up Click here to install DDT2000 library for NI CAN Card NI Can test
Seulement si vous avez déjÄ… installé le logiciel NI-CAN V1.5 ou plus Cliquer ici pour ajouter la prise en compte par DDT2000 des cartes NI NI Can test
Only if you have installed NI-CAN software Version 1.5 or up Click here to install DDT2000 library for NI CAN Card NI Can test