B3BG0XK1 - 607

OPERATION REAR ANTI-ROLL BAR


1 -
SPECIAL TOOLS



[1] Positioning calipers (-).0532-B
.

2 -
REMOVAL - REFITTING REAR ANTI-ROLL BAR MOUNTINGS


2 - 1 -
REMOVAL



Remove
:


the rear wheels



the mud shields



Unclip the brake pipes at (A) and (B)
.


Uncouple the height sensor rod (1) at (C) (according to specification)
.


Take the weight of the rear suspension using a jack
.


Unscrew the mounting bolts of the rear axle without removing them
.

WARNING :
take care not to damage the brake pipes and the wheel sensor
.


Uncouple the rod (2) of the anti-roll bar (3)
.


Remove
:


the main bearing cap bolts (4)



the bearing caps (5)



the rubber bearings (6)


2 - 2 -
REFITTING


WARNING :
line up the flat parts (7) of the bearing (6) with those of the anti-roll bar (8)
.


Proceed in the reverse order to removal
.

2 - 3 -
TIGHTENING TORQUES



Bolt(s) (4) to 2.5 m.daN
.


Rod mounting bolts to 5.7 dam.n
.


Rear suspension mounting bolts to 6.5 dan.m
.

3 -
REMOVAL - REFITTING REAR ANTI-ROLL BAR


3 - 1 -
SPECIAL TOOLS



[2] Rear suspension units compression tool
.


[3] 2 rear spring compression cups(-).0915-D7
.


[4] 2 support rings(-).0915-D8
.

3 - 2 -
REMOVAL



POSITION THE TOOLS [1], [2], [3]
.


Remove The rear bar bearings (6)
.


Remove the 2 front mounting bolts of the rear suspension
.


Take the weight of the rear suspension using a jack
.

WARNING :
take care not to damage the brake pipes and the wheel sensor
.


Remove the anti-roll bar via the left side
.

3 - 3 -
REFITTING



Fit the tool [1]
.


Proceed in the reverse order to removal
.

3 - 4 -
TIGHTENING TORQUES



Anti-roll bar rod lock nut : 5.7 da.Nm
.


Rear suspension mounting bolts to 6.5 dan.m
.


Anti-roll bar main bearing cap mounting bolts to 2.5 dan.m
.