Toggle navigation
Images.Elk.pl
B3E091651100W01
ïż
SIDE STEP MOLDING REMOVAL/INSTALLATION
SIDE STEP MOLDING REMOVAL/INSTALLATION
B3E091651100W01
1. Remove the fasteners.
2. While cutting the double-sided adhesive tape using a flathead screwdriver or a razor, separate the side step molding from the body.
Warning
• Using a razor with bare hands can cause injury. Always wear gloves when using a razor.
3. Pull the side step molding outward, then disengage clips A from the body.
4. Slide the side step molding towards the front of the vehicle and remove clips B from the side step molding.
5. Remove the side step molding.
6. Install in the reverse order of removal.
(1) Attach double-sided adhesive tape to the side step molding as shown in the figure.
Wyszukiwarka
Podobne podstrony:
B3E091266350W03
B3E091569873W02
B3E091768040W01
B3E091569920W02
B3E091650641W03
B3E091801051T02
B3E091050010W01
B3E091269100T03
B3E09176852YW01
B3E091801052T14
B3E091458490W10
B3E0918666F0W01
B3E091851380W02
B3E091860231W01
B3E091801052T20
B3E09176852XW01
B3E091901052T14
B3E091501049T01
więcej podobnych podstron