C-C-01 (E)
PARTS-SERVICE
1 JUNE 1994
H8.00-12.00XL
GRAM
HYSTER EUROPE
SUBJECT : DRIVE SHAFT. 1360966, TRANSMISSION TO DRIVE AXLE.
THE SUBJECT DRIVE SHAFT IS USED ON THE H8.00-12.00XL SERIES OF UNITS, WITH E007..
SERIAL NUMBER PREFIX.
A SMALL NUMBER OF TRUCKS, MANUFACTURED IN NOVEMBER AND DECEMBER 1993, WERE
FITTED WITH A SHAFT ASSEMBLY FROM AN ALTERNATIVE SUPPLIER. THIS SHAFT CAN BE
IDENTIFIED BY THE END DETAIL SHOWN IN FIGURE 1; THE UNIVERSAL JOINT BEARINGS
ARE LOCATED IN YOKES IN THE ENDS OF THE SHAFT WITH CIRCLIPS. DRIVE SHAFTS FROM
THE REGULAR SUPPLIER USE BOLT-ON BEARING BLOCKS, FIGURE 2.
FIGURE 1. FIGURE 2.
IT IS IMPORTANT TO RECOGNIZE THE DIFFERENCE WHEN ORDERING SERVICE PARTS.
SUPPLIER CONSTRUCTION CROSS AND BEARING KIT
ALTERNATIVE, FIGURE 1. PRESS-IN BEARINGS 1312827
REGULAR, FIGURE 2. BOLT-ON BEARINGS 0199861
INTERCHANGEABILITY: SHAFTS ARE INTERCHANGEABLE AS AN ASSEMBLY ONLY.
PARTS STOCK: REPAIR KITS LISTED.
EFFECTIVE SERIAL NUMBER:
AFFECTED TRUCKS ARE IN THE RANGE E007E01613P TO E007E01631P ONLY. {U.S. MANUFAC-
TURE ; E007D01712,3,8P AND E007D01721-E007D01737P}
We reserve the right to make changes in design or add improvements without incur-
ring the obligation to make such changes in equipment previously manufactured.