Audi 80 (91-96)2,6 1992-96 Engine code: ABC Replacement Interval Guide Important note Check For Engine Damage Repair Times â€Ã³ Ins Special Tools Special Piecautions Removal Installation Installation 1. Ensure camshaft sprockets can turn on taper but not tilt. 2. Ensure crankshaft locking tool fitted [2]. 3. Fit timing belt to camshaft sprockets. 4. Fit locking tool to camshafts [3]. Tool No.3243. 5. Fit timing belt in following order: o Guide pulley, o Crankshaft sprocket, o Tensioner pulley. 6. Lightly tighten tensioner bolt [4]. Ensure tensioner pulley can still be turned by hand. 7. Slide 23 mm diameter spacer between timing belt cover and belt [6]. 8. Install torque wrench to hexagon of tensioner (5). Turn tensioner clockwise to tension timing belt to 4 Nm. Tighten tensioner bolt simultaneously [4]. 9. Remove torque wrench and spacer (6). 10. Tighten tensioner bolt to 45 Nm (4). 11. Tighten bolt of each camshaft sprocket to 70 Nm. 12. Remove: o Camshaft locking tool (3). o Crankshaft locking tool. 13. Fit TDC sensor. 14. Fit crankshaft pulley. Ensure notch aligned with tab on crankshaft sprocket [10]. 15. Install components in reverse order of removal. IAD1S3511