Konfiguracja DHCP:
Konfiguracja routera krok po kroku(na hoście PC0 ustawiamy DHCP):
Router>enable
Router#conf terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname R1
R1(config)#interface fastEthernet 0/0
R1(config-if)#ip address 192.168.10.1 255.255.255.0
R1(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
R1(config-if)#exit
R1(config)#ip dhcp pool IPSTARKO
R1(dhcp-config)#network 192.168.10.0 255.255.255.0
R1(dhcp-config)#default-router 192.168.10.1
R1(dhcp-config)#exit
R1(config)#ip dhcp excluded-address 192.168.10.1 192.168.10.10
R1(config)#exit
R1#
%SYS-5-CONFIG_I: Configured from console by console
R1#write
Building configuration...
[OK]
R1#show running-config
Building configuration...
Current configuration : 556 bytes
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname R1
!
!
ip dhcp excluded-address 192.168.10.1 192.168.10.10
!
ip dhcp pool IPSTARKO
network 192.168.10.0 255.255.255.0
default-router 192.168.10.1
!
!
interface FastEthernet0/0
ip address 192.168.10.1 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
duplex auto
speed auto
shutdown
!
ip classless
!
!
line con 0
line vty 0 4
login
!
!
end
R1#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
R1#
R1#reload