{\rtf1\ansi\deff0{\fonttbl{\f0\fnil MS Sans Serif;}{\f1\fnil\fcharset0 MS Sans Serif;}}
{\colortbl ;\red255\green0\blue0;}
\viewkind4\uc1\pard\qc\cf1\lang2057\b\f0\fs24 G01 Linear Traverse\cf0\b0\fs16
\par \pard
\par \fs20
\par
\par The G\f1 01 code executes a cutting movement following a straight line, at a set feedrate.
\par
\par A G01 command is written in the following format:
\par G01 X _ _ _ _ Y_ _ _ _ Z _ _ _ _ ;
\par where,
\par G01 is the Linear Interpolation code.
\par X _ _ _ _ Y_ _ _ _ Z _ _ _ _ are the X, Y and Z axis co-ordinate values.
\par
\par The feedrate value programmed into the G01 command is the actual feedrate along the proposed tool path, not the feedrate of each axis/slide.
\par
\par \f0
\par \fs16
\par }