Use the following board and bracket
* Build the combined instrument and disassemble it.
* Locate the 8 pin connector chip 93c66.
* Find the image and quartz, according to these bridges ..
* Connect the clip to Port 0
* Set the bracket on the chip 93C66 (red on pin 1)
* Select the DIGA-Consult Citroen> Picasso> Tacho C66
* The DIGA-Consult shows you the old Kilometers to
* Select menu, KM others.
* Enter the new KM 0-stand
* Confirm the new KM-stand with OK.