2c

□ Mount the slide switch onto the foil side of the PC board. The tabs on the switch must go through the slots of the PC board. Solder the switch to the PC board.

Foil Side of PC Board

□    Strip the insulaton off of both ends on the remaining 2 1/2’ of black wire and the T of red wire to expose 118’ of bare wire. Mount and solder the black wire to the foil side of the PC board in hole J4 (-) and the red wire in hole J3 (+).

□    Solder the free end of the black wire to the back side fo the negative (--) clip.

□ Insert the free end of the red wire through the slot in the bottom case and solder to the positive (+) dip (see Figurę D).

Puli the wire back through the slot and insert the clip into the case as shown in Figurę E.

Figurę D

Red Wire

Puli Wire Back

Figurę E

-7-