S6 4 2 (326 koni)– 97

Audi S6 4,2 1996-97 | Engine codo: AHK

Impoit.int notÄ™ Replacement lnteiv.il Guide Clteck Fot Engine D.image Repait Times - his Speci.il Tools Speci.il Precautions Remov.il

lnst«ill.ition

Installation

1 Ensure each camshaft sprocket can turn freely on taper

NOTĘ: Tigliten bolts (10] fingei tiglit tlien slacken .ippioxim.itely one tum.

2.    Fit timing belt to crankshaft sprocket

3.    Fit crankshaft pulley [13] Lightly tighten bolts [12]

4    Fit crankshaft bolt Lightly oil thread and contact face [3] Tighten bolt finger tight

5    Fit crankshaft pulley alignment tool Tool No 3211

6. Fit timing belt in anti-clockwise direction to remainmg sprockets and pulleys. Ensure belt is taut belween sprockets 7 Turn tensioner pulley eloekwise until it contacts belt [7] Use wrench Matra V,159 Lightly tighten nut [6] Ensure tensioner pulley can still be turned by hand.

8.    Tighten crankshaft pulley bolts to 25 Nm [12]

9.    Turn tensioner pulley eloekwise until tensioner damper length is 138-139 mm (8] Use wrench Matra V.159 [7]

10.    Tighten tensioner pulley nut [6] Tightemng torque: 25 Nm.

11.    HoÅ‚d camshaft sprockets. Use tool No.3036. Tighten bolts to 45 Nm [10].

12.    Remove

o Timing tools [11] o Crankshaft pulley alignment tool.

13    Turn crankshaft two turns eloekwise. Ensure timing marks aligned [4]

14    Tighten crankshaft bolt [3] Tightening torque 450 Nm

15    Check length of tensioner damper is 136-139 mm (8)

16    If not: Repeat tensionmg procedurÄ™

17. Install components m reverse order of remowi.

18 Refill cooling system