IMAG0272 (Kopiowanie)

7Jit an ąmbieat temperaturę from 27F to 113F use machinę oil(GB443~S4) NI 5 Al an ambiem temperaturę offrom *4F to 27F use synihebc spindle oiI(GB442-64). Sufficient filtered hydraulic oii should be nuunoined in thejacks . otherwise, the rated height cannot be reached

8.Violeni Shocks musi be avoided during the operadon.

9.User must operne the jack correctly according to operating instruction: If the jack has some guality probleras M can not be operated.

1 .Release valvelever

2.Base

3.0-Ring

4.Hydraulic cylinder SJlam

6.Hydraulic oil 7.0łl-tightlank

8. Extension screw

9. Top cap

10. Pump plunger

11. Pump Body 12.0-Ring

OPERATINGINSTRUCTION

l.Before operating .estimate the weight of the load, Do not overload the jack beyond i 15 rated load.

2.Selcct point of action according to the graviiańonal center place the jack on the hard ground if necessaiy, place a hard plank under the jack so as to avoid tottcring or falling during operation.

3.Before operating thejacks, first .insert the notched cnd of the handle inco the release value .Tum the operating handle clock wise until release value is dosed. Do not over tightcn the value.

4.1nsett operating handle into the socket and the ram is steadily raised by the up and down movement of the handle and the load is raised. The ram will stoprising wben theregured height is reacbed.

5.Lowcr the ram by ruming the release value. Counter-cloc kwisc with the notched cnd slackcn it slowly whenaload is applied, or accidents can occur.

ó.Whcn morę tban one jack is used ot the same timc it is impoiMol lo operne llic diflerenljacks«anequ»lspeed with equil load. Otherwise. Miero is dnnger of falling Ihe enlire fuaure.

HYDRAULIC JACK

OPERATING INSTRUCTIONS