gear mount

Primary gear mount exploded view

1" #6 screw

1.5 cm long piece of 3/4" (18 mm) dowel

Smali błock of mapie, 2 x 2 x 0.4 cm glued onto gear to give screw morę to thread into.

One of many gears, see "templates" in the plans. Yo ucan also use the online gear tern piąte generator to make templates woodgears.ca/gear_cutting/template.html Calibrate size, then use pitch=16.8 mm and contact angle=8 deg

5/16 x 4" carriage bolt

5/16 x 2" bolt, thread does not go all the way to the head.

Pieces of UHMW tape help gear tum morę smoothly. (not strictly necessary) #8 screw

1.5" washer

Gear mounting bolt

gets clamped in these split holes.

Plastic knob with 5/16"thread