suziki rm125
66

15-14 FRONT AND REAR BRAKES

•    Tighten the master cylinder mounting bolts to the specified torque.

H Master cylinder mounting bolt ®:

10 Nm (1.0 kgf-m, 7.0 Ib-ft)

•    Tighten the brake hose union bolt to the specified torque.

[*] Brake hose union bolt d): 23 N m (2.3 kgf-m, 16.5 Ib-ft)

•    Refill brake fluid and bleed air from the brake system. ((r7=15-4)

REAR MASTER CYLINDER REASSEMBLY

Reassemble and remount the master cylinder in the reverse order of removal and disassembly. Pay attention to the following points:

•    Tighten the master cylinder mounting bolts ® to the specified torque.

H Master cylinder mounting bolt:

10 N m (1.0 kgf-m, 7.0 Ib-ft)

•    Tighten the brake hose union bolt (D to the specified t H Brake hose union bolt: 23 N m (2.3 kgf-m, 16.5

CAUTION

Improper brake hose routing ca hose.

Set the brake hose so/ tighten the union bolt. enough clearance to the rearsu

ches the stopper and he brake hose has ension spring.

• Refill brake fluid and bleed air from the brake system. ((r7=15-4)

BRAKE PEDAŁ

REMOVAL

•    Remove the cotter pin ® and brake pedał pivot bolt.

•    Remove the return spring.

•    Remove the cotter pin (D, washer and pin.