suzuki rm25054
15-8 FRONT FORK AND STEERING
15-8 FRONT FORK AND STEERING
in) of inner rod thread
• Make surę approx. 10 mm (0.39 exposed on the end. (d7“ 15-21)
Insert the push rod into the inner rod.
Insert the shaped projection of center bolt into the push rod. (£7*15-22)
• Check or adjust the clearance between the locknut an bolt to provide morę than 1 mm (0.04 in). (£7“ 1
• Tighten the locknut/center bolt to the speciff H Locknut/center bolt: 22 N m (2.2 kqf-m, 1
• Tighten the center bolt to the^speęifie'
H Center bolt: 70 N m (7.c( I ^m751.( -ft)
7
|
'i I % T ^ |
i i i |
|
Im,' |
(0.04 in) |
• Pour the specified amount fork oil into the outer tubę in accor-dance with the following table.
|
SPRING |
STD OIL OUANTITY |
OIL OUANTITY ADJ. RANGĘ |
|
STANDARD |
362 ml (12.24/12.75 US/Impoz) |
321 -415 ml (10.85/11.30- 14.03/ 14.61 US/Impoz) |
|
SOFT |
367 ml (12.40/12.92 US/Impoz) |
326 - 420 ml (11.02/11.48- 14.20/ 14.79 US/Imp oz) |
|
HARD |
357 ml (12.07/12.57 US/Impoz) |
316-410 ml (10.68/11.13- 13.86/ 14.44 US/Imp oz) |
99000-99001-SS5: SUZUKI FORK OIL SS-05
Wyszukiwarka
Podobne podstrony:
22451 Suzuki RM2504 15-8 FRONT FORK AND STEERING • Make surę approx. 10 mm (0.39 in) of inner rod t
Suzuki RM125X 4-14 MACHINĘ TUNING 4-14 MACHINĘ TUNING x- " • Make surę approx. 10 mm (0.39 in)
41913 Suzuki RM2508 15-22 FRONT FORK AND STEERING • Clamp the axle holder with a vise. Protect the
suzuki rm25050 15-4 FRONT FORK AND STEERING 15-4 FRONT FORK AND STEERING The fork oil quantity must
suzuki rm25052 15-6 FRONT FORK AND STEERING 15-6 FRONT FORK AND STEERING • Slide
suzuki rm25056 15-10 FRONT FORK AND STEERINGSUSPENSION BALANCE Balancing the front to rear suspensi
suzuki rm25058 15-12 FRONT FORK AND STEERINGDISASSEMBLY • Set rebound and compres
suzuki rm25060 15-14 FRONT FORK AND STEERING • With the outer tubę compressed by hands, remove the
suzuki rm25062 15-16 FRONT FORK AND STEERING • Remove the compression damper unit from the sub-tank
suzuki rm25064 15-18 FRONT FORK AND STEERINGSLIDE BUSHING AND GUIDE BUSHING Inspect the “teflon coa
suzuki rm25066 15-20 FRONT FORK AND STEERING • Apply fork oil to the O-rings and
suzuki rm25068 15-22 FRONT FORK AND STEERING 15-22 FRONT FORK AND STEERING • Clamp the axle holder
suzuki rm25070 15-24 FRONT FORK AND STEERING • Tighten the fork upper clamp bolts
suzuki rm25072 15-26 FRONT FORK AND STEERING • Remove the steering nut with the s
26502 Suzuki RM2507 FRONT FORK AND STEERING 15-21 FRONT FORK AND STEERING 15-21 Approx.10 mm (0.39
74440 Suzuki RM2502 15-6 FRONT FORK AND STEERING 15-6 FRONT FORK AND STEERING • S
więcej podobnych podstron