suzuki rm250
89

16-16 REAR SUSPENSION

REAR SHOCK ABSORBER REASSEMBLY

•    Apply the rear suspension oil to the O-rings and the “teflon coating metal”.

•    Insert the damper rod assembly © and fit the new circlip (D.

•    Puli up the damper rod assembly © until it is stopped by the circlip (D.

•    Fit the stopper to the shock absorber body.

•    Fili the specified rear suspension oil in the rear shock absorber. (£7*16-13)

® 99000-99001-S25: SUZUKI REAR SUSPENSION OIL SS-25

mają Oil capacity: Approx. 380 ml (12.84/13.38 US/Imp oz)

•    Reinstall the compression adjuster assembly. (£7* 16-14)

•    Pressure the rear shock absorber unit with nitrogen gas to 981 kPa (9.8 kgf/crrF, 139.5 psi). (£7*16-14)

•    Reassemble the spring and adjust the spring set length. (£7=16-10)

•    Tighten the valve cap.

•    Remount the rear shock absorber to the tramę. (£7=16-

REAR SHOCK ABSORBER DIS

High pressure nitrogen gas is sealed in the unit. Be surę to release gas before absorber unit.

•    Remove the valve cap.

•    Press the valve with a scrć

Releasing high pressure gas from the rear shock absorber unit can be hazardous.

Place a rag over the valve and push the valve with a screwdriver to release nitrogen gas. Do not use your finger to push the valve, and direct the valve away from your face and body.