40019 str7 (9)

support the values 5 and 6. You can abbreviate this parameter by omitting DATA= and specifying a value for d.

STOF-s

Specifies the number of etop bite that define the end of a character: 1, 1.5, or 2. If the band ratę is 110, the default value is 2; otherwise, the default value is 1. Not all computers support the value 1.5. You can abbreviate this parameter by omitting S'T0F^r- and specifying a value for s.

RETRY=r

Specifies the retry action to take if a time-out error occurs when MODĘ attempts to send output to a serial printer. This parameter causes part. of MODĘ to remain resident in memory. The foli owing list shows each valid value for r and a brief description of its meaning:

E    Return an error from a status check of a busy port.

B    Return "busy" from a status check of a busy port.

P Continue retrying until printer accepts output.

R    Return “ready" from a status check of a busy port.

N    Take no retry action (default value). You can also specify nonę for

this value.

If you are using the MODĘ command over a network, do not use any of the r values. You can abbreviate this parameter by simply omitting RETRY--and specifying a value for r.

ł

Syntax

MODĘ (Configure Serial Port)—Notę

The RETRY=E> setting provides the saee support as the P paraseter did in previous versions ot MS-DOS.

♦