321

WINDSHIELD AND WINDOWS

_Back Door Window (Cont'd)_

REMOVAL AND INSTALLATION FOR UNBROKEN ORIGINAL EOUIPPED GLASS

CAUTION:

If you remove unbroken original equipped glass at the time of panel beating, painting, repairing water leakage, etc., you must leave sealant and primer as much as possible on the original glass.

If you thoroughly remove residual sealant on original equipped glass and then install the glass with sealant, the adhesive force will be reduced.

So be surę to leave original sealant and primer as much as possible on original equipped glass, when removing unbroken original glass.

Except for this, the methods of removal and installation are the same as in GLASS REPLACE MENT.

REPAIRING LEAKS

Leaks can be repaired without removing and rein-stalling glass.

If water is leaking between caulking materiał and body or between glass and caulking materiał, determine extent of leak by applying water while pushing glass outward.

To stop the leak apply Primer and then sealant to the leak point.

SBF1828

After this, securely install moldings.