plik


ÿþBMW Parts and Accessories  Installation Instructions 120 140 3 4 100 160 2 5 80 180 60 200 1 6 40 220 7 0 20 240 R/T F 53 0081 2W Retrofit Multi-Function Steering Wheel (MFL) Cruise Control System (GRA) series-identical retrofit for BMW 5 Series (E 39) left and right-hand drive vehicles Installation time approx. 1.5 hours, which can vary according to the condition and fittings of the vehicle. Retrofit/Installation Kit No. 65 71 0 026 292/293/286 Retrofit/Installation Kit No. 65 71 0 025 425 / 65 71 0 141 897 Retrofit/Installation Kit No. 65 71 0 026 292 (see title page for others) Date: 09.2001 Installation Instructions No. 01 29 0 026 285 Contents Chapter Page 1. Preparatory work..........................................................................................................13 2. Installation and cable-laying diagram ..........................................................................14 3. Connection overview of cable set GRA/MFL................................................................15 4. Install cable set GRA/MFL and connect ......................................................................16 5. Install MFL steering wheel............................................................................................18 6. Finalising operations/coding ........................................................................................19 7. Circuit diagram of cruise control system BMW 5 Series (E 39) ....................................20 Retrofit/Installation Kit No. 65 71 0 026 292 (see title page for others) Date: 06.2000 Installation Instructions No. 01 29 0 026 285 Important notes Target Group Target group for these installation instructions are technical personnel trained on BMW vehicles, who have special knowledge of body electronics. Tasks: Carry out all maintenance, repair and installation work on BMW vehicles on own authority. All operations should be carried out with the aid of the current BMW - repair instruction manuals - circuit diagrams in a logical sequence using the prescribed tools (special tools) whilst observing the applicable health and safety regulations. Assembly notes All operations are shown on a left-hand drive vehicle. On right-hand drive vehicles, proceed in the same sequence but in mirror image. Should specified pin spaces be already assigned, bridges, double crimping or parallel connections will have to be made. Take care to see that cables do not get kinked or damaged when they are being installed as otherwise faults may occur which can only be localised later by extensive reworking. Costs arising in this way will not be reimbursed by BMW. Tightening torques for screwed connections should be observed. Please refer to the parts information system (TIS) for the required tightening torques. Required tools and ancillary materials Set of flat-tip screwdrivers Set of Phillips screwdrivers Set of TORX wrenches Hand lamp Drilling machine Set of hexagon-socket screw keys (Allen keys) Set of 1/2 inch socket wrenches Crimping pliers for AMP contacts Retrofit/Installation Kit No. 65 71 0 026 292 (see title page for others) Date: 06.2000 EN/12 Installation Instructions No. 01 29 0 026 285 1. Preparatory work TIS AW no. Note safety regulations on dealing with components of the airbag system. 32 34 Carry out short test Disconnect negative terminal of the battery 12 00 ... The following components should be disassembled in advance: Steering wheel 32 33 00 Glove box 51 16 360 Lower side trim panel of the A-pillar in the front passenger footwell Trim panel of foot controls Shroud of lower part of steering column Side trim panels of the centre console Lid of the E box Retrofit/Installation Kit No. 65 71 0 026 292 (see title page for others) Date: 06.2000 EN/13 Installation Instructions No. 01 29 0 026 285 2. Installation and cable-laying diagram 4 3 2 1 F 39 0094 2W Key 1 Connection multi-functional steering wheel 2 Cable set GRA/MFL 3 E box 4 Light module A3 Retrofit/Installation Kit No. 65 71 0 026 292 (see title page for others) Date: 06.2000 EN/14 Installation Instructions No. 01 29 0 026 285 3. Connection overview of cable set GRA/MFL A4 A5 A3 a A2 A6 A1 F 53 0085 2W Cable colour/ Code design./ Item Designation Signal Connection point in vehicle cross section plug-in place a Cable set GRA/MFL ____ ____ ____ ____ A1 Blade terminal contact DME/ ye/bk At 10-pole green connector underneath X10170, DDE Ø 0.35 mm2 the steering column PIN 8 A2 Blade terminal contact I-/KBus wh/gr/ye At 10-pole green connector underneath X10170, Ø 0.35 mm2 the steering column PIN 9 A3 Blade terminal contact Term. R vi/ye At 10-pole green connector underneath X10170, Ø 0.50 mm2 the steering column PIN 10 A4 Twin-lead terminal Term. R vi/ye At light module A3, X10117, Ø 0.50 mm2 56-pole connector PIN 13 A5 Twin-lead terminal I-/KBus wh/gr/ye At light module A3, X10117, Ø 0.35 mm2 56-pole connector PIN 36 A6 Blade terminal contact DME/ ye/bk At control unit DME/DDE A60004 X60004, DDE Ø 0.35 mm2 40-pole connector PIN 27 Retrofit/Installation Kit No. 65 71 0 026 292 (see title page for others) Date: 06.2000 EN/15 Installation Instructions No. 01 29 0 026 285 4. Install cable set GRA/MFL and connect Unplug green, 10-pole connector X10170 from the switch support (1). Install cable set GRA/MFL along the series wiring harness (2) to the 1 connector X10170. Decouple connector X10170 and plug in branch cables A1  A3 as follows: A1, cable colour yellow/black, in Pin 8 A2, cable colour white/grey/yellow, in Pin 9 A3, cable colour violet/yellow, in Pin 10 A1 A2 Install branch cables A4  A6 behind the heater/air conditioner to the glove box. 2 X10170 A3 F 53 0083 2W Install branch cable A6 behind the glove box through the rubber grommet into the E box. Pull out 40-pole connector X60004 from the DME/DDE control unit and decouple it. X60004 A6 F 39 0090 2W Plug branch cable A6, cable colour yellow/black, into Pin 27. Couple connector X60004 again and connect to X60004 the DME/DDE control unit. A6 F 39 0091 2W Install branch cables A4 and A5 to the light module. 2 1 Unplug connectors (1, 2 and 3) from the light module (4). 3 1 4 F 53 0004 2W Retrofit/Installation Kit No. 65 71 0 026 292 (see title page for others) Date: 06.2000 EN/16 Installation Instructions No. 01 29 0 026 285 4. Install cable set GRA/MFL and connect At the 56-pole connector X10117, cut the following cables approx. 10 cm away from the X10117 connector: Violet/yellow cable (terminal R) coming out of Pin 13 and white/grey/yellow cable (I/K Bus) coming out of Pin 36. In each case provide the cable ends with an AMP annular and pin contact and put on housing. F 53 0087 2W Connect branch cable A4, cable colour violet/yellow, to the violet/yellow cable coming X10117 out of Pin 13 and connect branch cable A5, cable colour white/grey/yellow, to the white/grey/yellow cable coming out of Pin 36. A4 A5 F 53 0088 2W Retrofit/Installation Kit No. 65 71 0 026 292 (see title page for others) Date: 06.2000 EN/17 Installation Instructions No. 01 29 0 026 285 5. Install MFL steering wheel Vehicles with four-spoke steering wheel only 120 140 3 4 100 160 2 5 80 180 60 200 1 6 40 220 The markings on the steering wheel and 0 7 2 20 240 steering shaft must match. Put on existing four-spoke steering wheel (1) and fasten with screw (2). 1 Observe tightening torque as perTIS. F 46 0317 2W Put on airbag unit (1) which is supplied with the installation kit and screw it on. 120 140 3 4 100 160 2 5 80 180 60 200 1 6 Observe tightening torque as perTIS. 40 220 0 7 20 240 1 R/T F 53 0082 2W Vehicles with three-spoke steering wheel only 120 140 3 4 100 160 2 5 80 180 60 200 1 6 40 220 The markings on the steering wheel and the 0 7 2 20 240 steering shaft must match. Put on existing three-spoke steering wheel (1) and fasten with screw (2). 1 Observe tightening torque as perTIS. F 39 0092 2W Fit existing airbag unit (1). Observe tightening torque as perTIS. 120 140 3 4 100 160 2 5 80 180 60 200 1 6 40 220 0 7 20 240 1 F 39 0093 2W Retrofit/Installation Kit No. 65 71 0 026 292 (see title page for others) Date: 06.2000 EN/18 Installation Instructions No. 01 29 0 026 285 6. Finalising operations/coding Fasten all plug-in connectors again and put on connectors. Reassemble the vehicle in the reverse sequence of disassembly. Carry out a function test. This retrofit package is not coding-relevant. Retrofit/Installation Kit No. 65 71 0 026 292 (see title page for others) Date: 06.2000 EN/19 Installation Instructions No. 01 29 0 026 285 7. Circuit diagram of cruise control system BMW 5 Series (E39) A60004 KAR X60004 27 A3 36 13 X10117 R<9 I-/K-Bus 0,35 0,35 0,5 GE/SW WS/GR/ VI/GE GE MFL+ I-/K-Bus R<9 89 10 X10170 Key A3 Light modul A60004 Control unit DME/DDE X10117 Connector, 56-pole, on the light module X10170 Connector, 10-pole, on the switch support X60004 X60004 Connector, 40-pole, on the control unit DME/DDE Retrofit/Installation Kit No. 65 71 0 026 292 (see title page for others) Date: 06.2000 EN/20 Installation Instructions No. 01 29 0 026 285

Wyszukiwarka

Podobne podstrony:
MFSW Retrofit kierownica
Test dla kierowcy[1]
BMW E39 Wymiana wężyków spryskiwaczy
RozporzadzenieV1 06 czas pracy kierowcy
dekalog myslacego kierowcy
pytania o czas pracy kierowcy
Porady Regulacja kierownicy i siodła
wspolczesne koncepcje przywodztwa, a funkcje kierownika i organu administracji publicznej
bmw E39 stale swieca swiatla stop
Dekalog Myslacego Kierowcy (3)
Demontaż kierownicy i zegarów
NIEMCY Zielone strefy Ważne dla kierowców!
Tabela doboru Retrofit APU

więcej podobnych podstron