72 1
SEAT  FRONT SEAT
FRONT SEAT
7209X 01
COMPONENTS
Headrest
Headrest Support
Front Seat Back
Spring Assy
Front Seat Back Cover
z Hog Ring
w/ Side Airbag:
Side Airbag
Front Seat Back Pad
Front Seat Cushion Cover
Passenger Seat:
Belt Warning Occupant
Front Seat Cushion Pad
Detection Sensor
Front Seat Belt Inner z Hog Ring
42 (430, 31)
Seat Track Cover
Reclining Adjuster
Inside Cover
Front Seat Cushion
43 (440, 32)
Shield Outer
Front Seat Cushion
Shield Inner
47 (480, 35)
47 (480, 35)
43 (440, 32)
Reclining Adjuster
Inside Cover
Vertical Seat
Front Seat Adjuster
Adjuster Knob
Reclining Adjuster
NÅ"m (kgfÅ"cm, ftÅ"lbf) : Specified torque Release Handle
z Non reusable part
B52074
2004 COROLLA (RM1037U)
Author : Date : 1785
72 2
SEAT  FRONT SEAT
7209Y 01
OVERHAUL
CAUTION:
Wear the gloves, because the cutting surface of the seat back frame and seat adjuster may injure
your hand.
HINT:
Tape the screwdriver tip before use when prying parts.
1. DISCONNECT BATTERY NEGATIVE TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the battery terminal and disconnect the airbag connector.
2. REMOVE FRONT SEAT
(a) Remove the headrest.
(b) Remove the seat track covers and 4 bolts.
(c) Slide the seat to the most rear position.
(d) Disconnect the connector(s) under the seat.
(e) Remove the seat.
NOTICE:
Be careful not to damage the body.
3. REMOVE SEPARATE TYPE FRONT SEAT BACK ASSY
(a) Remove the bolt, washer and seat belt inner.
(b) Remove the seat cushion shield inner.
B58173
(c) Using a screwdriver, remove the reclining adjuster re-
lease handle.
B58171
(d) Remove the seat cushion shield outer.
(e) w/ side airbag:
Disconnect the airbag wire under the seat.
(f) Remove the hog rings, 4 bolts and seat back.
4. REMOVE SEPARATE TYPE FRONT SEAT BACK
COVER
(a) Remove the hog rings and turn up the seat back cover.
B58172
2004 COROLLA (RM1037U)
Author : Date : 1786
72 3
SEAT  FRONT SEAT
(b) w/ side airbag:
Using a screwdriver, disconnect the clip.
(c) Remove the headrest supports, seat back cover and seat
back pad.
B57237
5. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER
(a) Remove the hog rings, seat cushion cover and seat cushion pad.
6. REMOVE FRONT SEAT ADJUSTER
(a) Remove the reclining adjuster inside covers.
7. INSTALL FRONT SEAT ADJUSTER
(a) Install the reclining adjuster inside covers.
8. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER
(a) Install the seat cushion pad to the seat adjuster.
(b) Using hog ring pliers, install the seat cushion cover with
new hog rings.
NOTICE:
S Be careful not to damage the cover.
S Be careful to prevent the cover wrinkles as little as
possible.
9. INSTALL SEPARATE TYPE FRONT SEAT BACK
COVER
(a) Install the seat back pad to the seat back spring assy.
B50126
(b) Cover the top of the seat back with the seat back cover.
(c) Install the headrest supports.
(d) w/ side airbag:
Connect the clip.
(e) Using hog ring pliers, fully install the seat back cover with
new hog rings.
NOTICE:
S Be careful not to damage the cover.
S Be careful to prevent the cover wrinkles as little as
possible.
B57311
10. INSTALL SEPARATE TYPE FRONT SEAT BACK ASSY
(a) Install the seat back with the 4 bolts.
Torque: 43 NÅ"m (440 kgfÅ"cm, 32 ftÅ"lbf)
(b) Using hog ring pliers, install new hog rings.
(c) Install the cushion shield outer with the 2 screws.
2004 COROLLA (RM1037U)
Author : Date : 1787
72 4
SEAT  FRONT SEAT
(d) Install the vertical seat adjuster knob with the clip.
(e) Install the reclining adjuster release handle.
(f) Install the cushion shield inner with the 2 screws.
(g) Install the seat belt inner with the washer and bolt.
Torque: 42 NÅ"m (430 kgfÅ"cm, 31 ftÅ"lbf)
(h) Check that the seat belt inner moves smoothly.
11. INSTALL FRONT SEAT
(a) Slide the seat to the most rear position.
(b) Place the seat on the cabin.
NOTICE:
Be careful not to damage the body.
(c) Connect the connector(s) under the seat.
(d) Install the front seat with the 4 bolts.
Torque: 47 NÅ"m (480 kgfÅ"cm, 35 ftÅ"lbf)
(e) Install the seat track covers.
(f) Install the headrest.
2004 COROLLA (RM1037U)
Author : Date : 1788
72 5
SEAT  REAR SEAT (SEDAN WITH SEPARATE TYPE)
REAR SEAT(SEDAN WITH SEPARATE TYPE)
7209Z 01
COMPONENTS
Room Partition Board RH
Headrest
x 3 Seat Back Lock Assy
x 2
Headrest
18 (185, 13) Room Partition Board LH
18 (185, 13)
x 2
Rear Seat Back RH
x 4
18 (185, 13)
Rear Seat Cushion
Seat Belt Support
Rear Seat Back Frame RH
Rear Seat Back
Assy LH
Rear Seat Back Pad RH
Rear Seat Back Headrest Support
Cover RH
Headrest Support
Seat Belt Support
Rear Seat
Cushion Cover
Rear Seat Back
Frame LH
z Hog Ring
z Hog Ring
Rear Seat Back Pad LH
Rear Seat Back Cover LH
Rear Seat Cushion Pad
z Hog Ring
NÅ"m (kgfÅ"cm, ftÅ"lbf) : Specified torque
z Non reusable part
B52073
2004 COROLLA (RM1037U)
Author : Date : 1789
72 6
SEAT  REAR SEAT (SEDAN WITH SEPARATE TYPE)
720A0 01
OVERHAUL
1. REMOVE BENCH TYPE REAR SEAT CUSHION ASSY
(a) Disengage the 2 clamps, and then remove the seat cush-
ion.
2. REMOVE SEPARATE TYPE REAR SEAT BACK ASSY
(a) Lean the seat back forward.
(b) Remove the 2 clips.
(c) Remove the 2 bolts and seat back LH.
(d) Employ the same manner described above to the other
side.
B51101
3. REMOVE BENCH TYPE REAR SEAT CUSHION COVER
(a) Remove the hog rings and seat cushion cover.
4. REMOVE SEPARATE TYPE REAR SEAT BACK COVER
(a) Remove the hog rings, and then turn up the seat back cover LH.
(b) Remove the headrest supports, seat back cover LH and seat back pad LH.
(c) Employ the same manner described above to the other side.
5. INSTALL SEPARATE TYPE REAR SEAT BACK COVER
(a) Install the seat back pad LH to the seat back frame LH.
(b) Cover the top of the seat back with the seat back cover LH.
(c) Install the headrest supports.
(d) Using hog ring pliers, fully install the seat back cover LH with new hog rings.
(e) Employ the same manner described above the other side.
6. INSTALL BENCH TYPE REAR SEAT CUSHION COVER
(a) Using hog ring pliers, install the seat cushion cover with new hog rings.
7. INSTALL SEPARATE TYPE REAR SEAT BACK ASSY
(a) Install the seat back LH with the 2 bolts and 2 clips.
Torque: 18 NÅ"m (185 kgfÅ"cm, 13 ftÅ"lbf)
(b) Employ the same manner described above to the other side.
8. INSTALL BENCH TYPE REAR SEAT CUSHION ASSY
(a) Insert the seat cushion under the seat back.
(b) Engage the 2 clamps.
2004 COROLLA (RM1037U)
Author : Date : 1790
72 7
SEAT  REAR SEAT ASSY (SEDAN WITH BENCH TYPE)
REAR SEAT ASSY (SEDAN WITH BENCH TYPE)
720A1 01
COMPONENTS
Headrest
Headrest Support
Rear Seat Back Pad
Rear Seat Back Cover
z Hog Ring
7.8 (80, 69 in.Å"lbf)
Rear Seat Cushion Cover
z Hog Ring
Rear Seat Cushion Pad
NÅ"m (kgfÅ"cm, ftÅ"lbf) : Specified torque
z Non reusable part
B52079
2004 COROLLA (RM1037U)
Author : Date : 1791
72 8
SEAT  REAR SEAT ASSY (SEDAN WITH BENCH TYPE)
720A2 01
OVERHAUL
1. REMOVE BENCH TYPE REAR SEAT CUSHION ASSY
(a) Disengage the 2 clamps, and then remove the seat cush-
ion.
2. REMOVE BENCH TYPE REAR SEAT BACK ASSY
(a) Remove the headrests.
(b) Remove the 2 bolts and seat back.
3. REMOVE BENCH TYPE REAR SEAT CUSHION
COVER
(a) Remove the hog rings and seat cushion cover.
B51101
4. REMOVE BENCH TYPE REAR SEAT BACK COVER
(a) Remove the headrest supports.
(b) Remove the hog rings and seat back cover.
5. INSTALL BENCH TYPE REAR SEAT BACK COVER
(a) Cover the top of the seat back pad with the seat back cover.
(b) Install the headrest supports.
(c) Using hog ring pliers, fully install the seat back cover with new hog rings.
NOTICE:
S Be careful not to damage the cover.
S Be careful to prevent the cover wrinkles as little as possible.
6. INSTALL BENCH TYPE REAR SEAT CUSHION COVER
(a) Using hog ring pliers, install the seat cushion cover with new hog rings.
NOTICE:
S Be careful not to damage the cover.
S Be careful to prevent the cover wrinkles as little as possible.
7. INSTALL BENCH TYPE REAR SEAT BACK ASSY
(a) Hook the seat back to the body.
(b) Install the 2 bolts.
Torque: 7.8 NÅ"m (80 kgfÅ"cm, 69 in.Å"lbf)
8. INSTALL BENCH TYPE REAR SEAT CUSHION ASSY
(a) Insert the seat cushion under the seat back.
(b) Engage the 2 clamps.
2004 COROLLA (RM1037U)
Author : Date : 1792