Cisco Exploration CCNA 4 0 CCNA 1 Final Exam 2011 latest (hot hot hot)

CCNA 1 Final Exam 2011 latest (hot hot hot)

Post by Admin at 10:00 AM

Hi! I have been posted content of ccna1 final exam (latest and only question.) I

will post the answer and insert image on sunday . If y ou care, please subscribe
your email an become a first person have full test content. Subcribe now

Some question have not content because this question have images content. So that can you wait for me? SUNDAY

1. A user sees the command prompt: Router(config-if)# . What task can be performed at this mode?

Reload the device.

Perform basic tests.

Configure individual interfaces.

Configure individual terminal lines.

2. Refer to the exhibit. Host A attempts to establish a TCP/IP session with host C. During this attempt, a frame was captured with

the source MAC address 0050.7320.D632 and the destination MAC address 0030.8517.44C4. The packet inside the captured

frame has an IP source address 192.168.7.5, and the destination IP address is 192.168.219.24. At which point in the network was

this packet captured?

leaving host A

leaving ATL

leaving Dallas

leaving NYC

Game flash

Home

CCNA1

CCNA2

CCNA3

CCNA4

Complete CCNA Training

www.INE.com/CCNA

Instant access to 800+ hours of Cisco training
videos. Only $159/mo

Create Online Exams/Tests

www.examgeneral.com

Offer Exams Globally With Ease Let us Manage
Your Test Results

Metro Ethernet

www.zyxel.pl

ZyXEL z certyfikatem MEF do sieci
metropolitarnych

Neostrada

www.tp.pl/neostrada

Zamów już teraz Wymarzony Internet. Pierwsze
2 miesiące za darmo!

Ads by Google

CCNA

Cisco Exam

CCNA 1 Exam

Exam Skills

CCNA Lab Kit

2011-05-30

Cisco Exploration CCNA 4.0: CCNA 1 Fi…

…blogspot.com/…/ccna-1-final-exam-2…

1/17

3. Which password is automatically encrypted when it is created?

vty

aux

console

enable secret

enable password

4. Refer to the exhibit. Which layered network model is shown in the diagram?

Cisco

IETF

OSI

TCP/IP

5. Refer to the exhibit. While configuring a network, a technician wired each end of a Category 5e cable as shown. Which two

statements are true about this setup? (Choose two.)

The cable is suitable for connecting a switch to a router Ethernet port.

The cable is suitable for connecting dissimilar types of devices.

The cable is unusable and must be rewired.

The cable is terminated in a way that the transmit pin is wired to the receive pin.

The cable simulates a point-to-point WAN link.

6. Which exhibit shows the interface that is configured by the command, router(config)# interface serial 0/0/1?

7. A user enters http://www.cisco.com/web1.htm in the address line of a browser. Which statement is true about this transaction?

The "http" portion indicates the protocol that is being used.

The "web1.htm" portion is the specific service name.

The retrieved web page will be displayed in URL code.

The "www.cisco.com" is the name of the web page file that is called.

8. Which of the following are the address ranges of the private IP addresses? (Choose three.)

10.0.0.0 to 10.255.255.255

200.100.50.0 to 200.100.25.255

150.150.0.0 to 150.150.255.255

172.16.0.0 to 172.31.255.255

192.168.0.0 to 192.168.255.255

127.16.0.0 to 127.31.255.255

9. Refer to the exhibit. Each media link is labeled. What type of cable should be used to connect the different devices?

Connection 1 - rollover cable

Connection 2 - straight-through cable

Connection 3 - crossover cable

2011-05-30

Cisco Exploration CCNA 4.0: CCNA 1 Fi…

…blogspot.com/…/ccna-1-final-exam-2…

2/17

Connection 1 - crossover cable

Connection 2 - rollover cable

Connection 3 - crossover cable

Connection 1 - straight-through cable

Connection 2 - crossover cable

Connection 3 - crossover cable

Connection 1 - straight-through cable

Connection 2 - crossover cable

Connection 3 - straight-through cable

Connection 1 - crossover cable

Connection 2 - straight-through cable

Connection 3 - crossover cable

10. Which combination of network id and subnet mask correctly identifies all IP addresses from 172.16.128.0 through

172.16.159.255?

172.16.128.0 255.255.255.224

172.16.128.0 255.255.0.0

172.16.128.0 255.255.192.0

172.16.128.0 255.255.224.0

172.16.128.0 255.255.255.192

11. Which device should be used for enabling a host to communicate with another host on a different network?

switch

hub

router

host

12. Refer to the exhibit. RouterB is configured properly. The Ethernet interface Fa0/0 of RouterA is configured with the use of the

commands that are shown. However, a ping from the Fa0/0 interface of RouterA to the Fa0/0 interface of RouterB is unsuccessful.

What action should be taken on RouterA to solve this problem?

Use the description command on the FastEthernet interface Fa0/0.

Configure the clock rate of the FastEthernet interface Fa0/0.

Use the no shutdown command on the FastEthernet interface Fa0/0.

Reboot the router.

13. Which physical connector type is used for a serial V.35 connection to the CSU/DSU?

14. Refer to the exhibit. PC1 is unable to access PC2. To troubleshoot this problem, the technician needs to confirm that the next

hop interface is operational. Which default gateway address should the technician ping from PC1 to confirm this?

10.0.0.254

192.168.0.249

192.168.0.250

10.0.1.254

15. Refer to the exhibit. The diagram represents the process of sending e-mail between clients. Which lis t correctly identifies the

component or protocol used at each numbered stage of the diagram?

1.MUA 2.MDA 3.MTA 4.SMTP 5.MTA 6.POP 7.MDA 8.MUA

2011-05-30

Cisco Exploration CCNA 4.0: CCNA 1 Fi…

…blogspot.com/…/ccna-1-final-exam-2…

3/17

1.MUA 2.POP 3.MDA 4.SMTP 5.MTA 6.MDA 7.SMTP 8.MUA

1.MUA 2.POP 3.SMTP 4.MDA 5.MTA 6.SMTP 7.POP 8.MUA

1.MUA 2.SMTP 3.MTA 4.SMTP 5.MTA 6.MDA 7.POP 8.MUA

16. Which option shows the PDU that contains the Layer 3 source and destination addressing for a packet?

17. Refer to the exhibit. A PC is communicating with another PC on a remote network. The two networks are connected by three

routers. Which action will help to identify the path between the hosts?

Use the ipconfig command at the host.

Use the ipconfig/all command at the destination.

Use the tracert command at the host.

Use the ping command at the destination.

18. What three statements are true about network layer addressing? (Choose three.)

Network layer addressing uses a hierarchy.

It uses addresses that are 48 bits in length.

It is used by Ethernet switches to make forwarding decisions.

It does not support broadcasts.

It uses a method by which the network portion of an address can be identified.

Network layer addressing identifies each host distinctly.

19. Refer to the exhibit. A network administrator remotely accesses the CLI of RouterB from PC1 using Telnet. Which statement is

true about this connection?

The data is automatically encrypted.

A Telnet server process is running on PC1.

The connection is made through a VTY session on the router.

A GET request was sent to RouterB to retrieve data during this session.

What type of network is maintained if a server takes no dedicated role in the network?

mainframe

client/server

peer-to-peer

centralized

21. When connectionless protocols are implemented at the lower layers of the OSI model, what is usually used to acknowledge

that the data was received and to request the retransmission of missing data?

UDP

Ethernet

a connectionless acknowledgement

an upper-layer, connection-oriented protocol or service

22. What information can be gathered by using the command netstat?

2011-05-30

Cisco Exploration CCNA 4.0: CCNA 1 Fi…

…blogspot.com/…/ccna-1-final-exam-2…

4/17

the default gateway

the routing protocol

active TCP connections

the locally configured subnet mask

23. During the encapsulation process, what identifiers are added at the transport layer?

source and destination IP addresses

source and destination MAC addresses

source and destination port numbers

source and destination channel identifiers

24. Refer to the exhibit. A network administrator is troubleshooting a link that is down between Router1 and Router2. To correct the

problem, which wire pairs need to be switched on one of the Ethernet cable ends?

pair 1 and pair 2

pair 1 and pair 3

pair 2 and pair 3

pair 2 and pair 4

25. Which range of port numbers are reserved for services that are commonly used by applications that run on servers?

0 to 255

0 to 1023

1024 to 49151

49152 to 65535

26. Refer to the exhibit. Assume all devices are using default configurations. How many subnets are required to address the

topology that is shown?

27. Refer to the exhibit. Host A is accessing multiple servers. Which combination of port number and address will uniquely identify

a particular process running on a specific server?

MAC address of the server and port number of the service

IP address of the host and port number of the service

MAC address of the host and port number of the service

IP address of the server and port number of the service

28. A network technician is tasked with setting up a network for six users, but the users should be able to use their accounts to log

on from any of the six computers. What type of network should be used?

workgroup

P2P applications

2011-05-30

Cisco Exploration CCNA 4.0: CCNA 1 Fi…

…blogspot.com/…/ccna-1-final-exam-2…

5/17

peer-to-peer network

client-server network

29. Refer to the exhibit. Host C is able to ping 127.0.0.1 successfully, but is unable to communicate with hosts A and B in the

organization. What is the likely cause of the problem?

Hosts A and B are not on the same subnet as host C.

The IP addresses on the router serial interfaces are wrong.

The subnet mask on host C is improperly configured.

The FastEthernet interface fa0/0 of router 1 is wrongly configured.

30. Which statement is true about Layer 3 addresses?

They are physical addresses.

They are used in routing decisions.

They are only used on local networks.

They are altered each time a packet crosses a router.

31. Refer to the exhibit. Which type of network design is shown?

client/server

wide area

dedicated server

peer-to-peer

32. What are three characteristics of CSMA/CD? (Choose three.)

Devices can be configured with a higher transmission priority.

A jam signal indicates that the collision has cleared and the media is not busy.

A device listens and waits until the media is not busy before transmitting.

The device with the electronic token is the only one that can transmit after a collision.

All of the devices on a segment see data that passes on the network medium.

After detecting a collision, hosts can attempt to resume transmission after a random time delay has expired.

33. Refer to the exhibit. The tracert command is initiated from PC1 to PC4. Which device will send a response to the initial tracert

packet from PC1?

Athens

Ankara

London

Paris

PC4

34. Refer to the exhibit. A network technician is trying to determine the correct IP address configuration for Host A. What is a valid

configuration for Host A?

IP address: 192.168.100.19; Subnet Mask: 255.255.255.248; Default Gateway: 192.16.1.2

IP address: 192.168.100.20; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.100.17

2011-05-30

Cisco Exploration CCNA 4.0: CCNA 1 Fi…

…blogspot.com/…/ccna-1-final-exam-2…

6/17

IP address: 192.168.100.21; Subnet Mask: 255.255.255.248; Default Gateway: 192.168.100.18

IP address: 192.168.100.22; Subnet Mask: 255.255.255.240; Default Gateway: 10.1.1.5

IP address: 192.168.100.30; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.1.1

IP address: 192.168.100.31; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.100.18

35. Refer to the exhibit. What function does router RT_A need to provide to allow Internet access for hosts in this network?

address translation

DHCP services

ftpd

web server

36. Refer to the exhibit. In a network, PC1 sends a message to PC2. The frame received at PC2 is shown. What information in this

frame determines the correct destination application?

timing and synchronization bits

destination and source physical addresses

destination and source logical network addresses

destination and source process numbers

37. What can the user do from the command prompt, Router(config-line)# ?

Configure one of the network interfaces.

Configure one of the physical or virtual lines.

Verify the running configuration on the device.

Configure the parameters for one of the routing protocols.

38. Refer to the exhibit. When computer A sends a frame to computer D, what computers receive the frame?

only computer D

only computer A and computer D

only computer B, computer C, and computer D

all computers

39. Refer to the exhibit. Host A is transmitting data to host B. Which address combination will be used as the data leaves the

Router1 Fa0/1 interface?

Destination IP: 192.168.72.2 Source MAC: 0007.C2B4.3421

Destination IP: 192.168.10.4 Source MAC: 0030.8596.DE81

Destination IP: 192.168.10.4 Source MAC: 0007.C2B4.3421

Destination IP: 192.168.72.2 Source MAC: 0030.8596.DE81

40. Refer to the exhibit. The ping 127.0.0.1 command is issued on the local host. What do the ping results indicate?

The local host can send packets on the local network.

The TCP/IP stack on the local host operates properly.

The local host has full connectivity to the default gateway.

The local host has full connectivity to the remote network.

2011-05-30

Cisco Exploration CCNA 4.0: CCNA 1 Fi…

…blogspot.com/…/ccna-1-final-exam-2…

7/17

41. When must a router serial interface be configured with the clock rate command?

when the interface is functioning as a DTE device

when the interface timers have been cleared

when the connected DTE device is shut down

when the interface is functioning as a DCE device

42. Which OSI layer does IP rely on to determine whether packets have been lost and to request retransmission?

application

presentation

session

transport

43. Refer to the exhibit. Host A wants to connect to host B on a different network. Which three IP addresses can be assigned to

host A to enable this connectivity? (Choose three.)

172.16.11.36

172.16.11.95

172.16.11.88

172.16.11.70

172.16.11.64

172.16.11.67

44. What happens when a host station receives a frame that contains its own MAC address in the destination field?

The Layer 2 information is removed and the frame is pushed up to Layer 3.

The host station will copy the information to its buffers and send it back out.

The frame originated from the host and will be ignored.

The Layer 3 information is added to the frame.

45. Which prompt represents the appropriate mode used for the copy running-config startup-config command ?

Switch-6J>

Switch-6J#

Switch-6J(config)#

Switch-6J(config-if)#

Switch-6J(config-line)#

46. Due to a security violation, the router passwords must be changed. What information can be learned from the following

configuration entries? (Choose two.)

Router(config)# line vty 0 3

Router(config-line)# password c13c0

Router(config-line)# login

The entries specify three Telnet lines for remote access.

The entries specify four Telnet lines for remote access.

The entries set the console and Telnet password to "c13c0".

2011-05-30

Cisco Exploration CCNA 4.0: CCNA 1 Fi…

…blogspot.com/…/ccna-1-final-exam-2…

8/17

Telnet access will be denied because the Telnet configuration is incomplete.

Access will be permitted for Telnet using "c13c0" as the password.

47. Which OSI layer addressing is required to route packets between two networks?

Layer 1

Layer 2

Layer 3

Layer 4

48. Which router component will have contents erased when the command erase startup-config is issued?

flash

RAM

ROM

NVRAM

49. Refer to the exhibit. An employee wants to access the organization intranet from home. Which intermediary device should be

used to connect the organization intranet to the Internet to enable this access?

hub

switch

router

wireless access point

50. A technician is asked to secure the privileged EXEC mode of a switch by requiring a password. Which type of password would

require this login and be considered the most secure?

console

enable

enable secret

VTY

Anonymous said...

awesome

Anonymous said...

tomo i have final exam, send the answers to my mail id its very helpful to me,

peculiar_mad@yahoo.co.in, thara234@gmail.com

Anonymous said...

I have final exam 24 march 2011, could you send answers to my email, please rininesi@hotmail.com.

Anonymous said...

could you send me answers ,

tomorow i have final exam.

rininesi@hotmail.com

65 Comment:

2011-05-30

Cisco Exploration CCNA 4.0: CCNA 1 Fi…

…blogspot.com/…/ccna-1-final-exam-2…

9/17

Anonymous said...

hi , I have exam tomorow could you send me answers ,please ?

rininesi@hotmail.com

Admin

on March 22, 2011 7:00 PM said...

OK tonight i will post full test ccna1 final exam.

Mohammed

on March 23, 2011 12:29 AM said...

please

moalomar@aol.com

Admin

on March 23, 2011 12:48 AM said...

Tonight i will post its. Please wait for me.

Now it is 1h45 PM. 8h PM i will post. subscribe your email an become a first person have full test

content.

Mohammed

on March 23, 2011 1:50 AM said...

can i have your email i will send you the new ver by today

Anonymous said...

me too, i have exam 2morow..wrong_mistake@ymail.com.tnx so much..

Anonymous said...

me too :(

ban_virtud15@yahoo.com

im begging you :(

Anonymous said...

Can I ask you for this cmplet test pls?

my email:

rp.scarecrow@gmail.com

thank you very much

Admin

on March 23, 2011 7:38 AM said...

wait for me. now i am trying finish this test. i need 30'.

Anonymous said...

please , don't forget to send me answers....

im waiting to receive in my email rininesi@hotmal.com

thank you very much

Anonymous said...

please can you send to me the correct anwers, on sunday i have the exam!!!!!

sara.paio@hotmail.it

Admin

on March 23, 2011 5:28 PM said...

oh the "ccna1 final exam" had been public yesterday. pls check new post. thank you

Anonymous said...

file is corrupt

Admin

on March 24, 2011 10:33 AM said...

oh are sure? please click right mouse and save as target. or download with idm. good luck

Anonymous said...

send exam answers please audia4it@hotmail.com

2011-05-30

Cisco Exploration CCNA 4.0: CCNA 1 Fi…

…blogspot.com/…/ccna-1-final-exam-2…

10/17

Anonymous said...

sorry but what is these numbers (like ccna1, ccna2.....) is it that cnna exams are of different types or is it

that higher nr mean latest exam?

Anonymous said...

yes its file corrupt :( i tried file can't read

Anonymous said...

Can someone help me. iam going to do the ccna1 exam soon. Here is my email:

raprasad@tpg.com.au It would be a great help. Thanks.

Anonymous said...

Can some one send me the ccna 1 questions and answers plz. rajan_prasad@hotmail.com

Thanks to the person who will send it.

Admin

on March 27, 2011 7:11 PM said...

Link here http://testccna-4u.blogspot.com/2011/03/ccna-1-final-exam-2011-latest-full.html?

showComment=1301274631818#c7885796774588798670

Hichem

on March 28, 2011 10:19 AM said...

Korochteyaru@hotmail.com

Anonymous said...

Hi can you send me answers please toma484@wp.pl

Thank you...

Admin

on March 29, 2011 11:28 AM said...

Link here http://testccna-4u.blogspot.com/2011/03/ccna-1-final-exam-2011-latest-full.html?

showComment=1301274631818#c7885796774588798670

Anonymous said...

Dyecity07@sbcglobal.net Thanks

Anonymous said...

thank you so much!! i've passed the exam!! wooo..

Anonymous said...

Please,send me answers begaibg@yahoo.com

thanks

Anonymous said...

hey, i have exams on 31stmarch 2011, can u please email me the answers?

az.reen289@gmail.com

Thank you..

it will be a great help.

Anonymous said...

can you please email me the answers ..?? shikamaru1343@yahoo.com

thank you i really need this

Anonymous said...

plz i neeed the answers ... shatha_852@yahoo.com

Anonymous said...

Please,send me answers awgwstyn@yahoo.com

thanks...you are the best..

paul said...

2011-05-30

Cisco Exploration CCNA 4.0: CCNA 1 Fi…

…blogspot.com/…/ccna-1-final-exam-2…

11/17

which CCNA catagory is the actual final CCNA exam?

Anonymous said...

can you please email me the answers ..??

DDP_999@hptmail.com

thank you i really need this

John said...

j_dub573@yahoo.com Can I get an email as well please?

Anonymous said...

please send me the answers too .. mymsn2008@live.nl

Admin

on April 5, 2011 7:24 AM said...

link download here: http://ccna.news361.org/images/ccna1final.doc

Anonymous said...

i have my ccna 1 final next week. are these the exact questions im going to be asked?

Anonymous said...

hi...can i have the final exam with answers? my exam is tomorrow april 11 (8:00am) Philippines...

here is my email

micobanayo@gmail.com

Thanks!!!

Anonymous said...

hi subscribed can u please email me the answers ,CCNA 1 Final Exam 2011

serialkilrkilr69r@hotmail.com

Anonymous said...

hi just subscibed can u please email me the answers,

emails: serialkilr69r@hotmail.com

Anonymous said...

Hi..!

can you please email me the answers ..??

lenrakin@yahoo.com

Anonymous said...

me too.. send me the answers.. T_T

>>>nubz_12@yahoo.com

Anonymous said...

I HAVE D LATEST QUESTIONS FOR D CCNA FINAL EXAM.SINCE I THOUGHT THAT I HAVENT FOUND

THE ANSWERS FOR THAT.WHERE CAN I FIND THE ANSWERS EASILY??MY EMAIL ID

ravi_chandran0077@yahoo.com

Anonymous said...

What is the password for the word document?!?!

Anonymous said...

me too plzz i need the answer, can you send me the answers and question to my mail (

icegarysaw@yahoo.com

Anonymous said...

2011-05-30

Cisco Exploration CCNA 4.0: CCNA 1 Fi…

…blogspot.com/…/ccna-1-final-exam-2…

12/17

i have an exam in an hours time would you please post the answers to me via savyelle@gmail.com

Anonymous said...

hi..

you said Sunday..it is Sunday today,so can you please put the answers up..thank you..

Anonymous said...

hi , I have exam tomorrow could you send me answers ,please ?

dj_flava79@yahoo.co.uk

Anonymous said...

hi just subscibed can u please email me the answers, i have exam this week

this is my email sheikhd07@ecc.edu

Anonymous said...

Hey, i just completed subscribing. Can you please email me the complete answers to

dls1308@gmail.com

Many Thanks

Anonymous said...

just finish subscribing..

can u see the answer to phoenix_dragon21@yahoo.com

thanks!

Anonymous said...

please email answers tjhernandez04@gmail.com much thanks

Anonymous said...

please email me the answers paksingtham@gmail.com

on May 9, 2011 9:15 PM said...

Please email me the questions please alaricmucino@gmail.com

Anonymous said...

dafanshu1222@hotmail.com

Anonymous said...

please sent email to Killercypher@hotmail.com

Anonymous said...

where are the answers? :O

Anonymous said...

can u please say the password of the document or link the correct answers in a file?

Anonymous said...

Hi...can i have the final exam with answers? my exam is tommorrow. PLEASE send it to my email

simplilav@yahoo.com. THANKS!!!!!

Anonymous said...

can u mail me the question with pictures and answers and please include the password. here is my

email: simplilav@yahoo.com THANKS!!! my exam is tommorrow and it will help a lot.... Thank You!

Anonymous said...

Please please, send me e-mail with right answers to Jajko2468@azet.sk :) Thanks :)

Admin

on May 30, 2011 12:15 AM said...

Ansưer here: http://testccna-4u.blogspot.com/2011/03/ccna-1-final-exam-2011-latest-full.html

2011-05-30

Cisco Exploration CCNA 4.0: CCNA 1 Fi…

…blogspot.com/…/ccna-1-final-exam-2…

13/17