How to Use the KM Integrated Test Chart Mar. 2004

Education & Documentation Division Training Department 2

1.

Checks to be Made Using the New Test Chart

No. Purpose

To check for gradation.

To check for incorrect registration and void image on the leading and trailing edges in the
sub scanning direction

To check the position at which to start writing the image and void image in the main scan-
ning direction

To check for distortion and zoom ratios

To check for copy image density and fusing performance

To check zoom ratios, jitter, and crooked image in the sub scanning direction

To check for resolution of the copy image

To check for unevenness and streaks in the sub scanning direction

To check zoom ratios in the main scanning direction

To check solid black including faint image on edges

How to Use the KM Integrated Test Chart

1

2

3

4

5

6

7

8

9

10

1
2
3
4
5
6
7
8
9

10

2.0

2.5

2.8

3.2

3.6

4.0

4.5

5.0

5.6

6.3

2.2

2.0

2.5

2.8

3.2

3.6

4.0

4.5

5.0

5.6

6.3

2.2

2.0

2.5

2.8

3.2

3.6

4.0

4.5

5.0

5.6

6.3

2.2

2.0

2.5

2.8

3.2

3.6

4.0

4.5

5.0

5.6

6.3

2.2

2.0

2.5

2.8

3.2

3.6

4.0

4.5

5.0

5.6

6.3

2.2

8pt.

9pt.

10pt.

12pt.

14pt.

18pt.

ABCDEFGHIJKLabcdefghijklm1234567890

ABCDEFGHIJKabcdefghijkl12345678

ABCDEFGHIJabcdefghijk1234567

ABCDEFGabcdefg123456789

ABCDEFabcdefg1234567

ABCDEabcdef12345

8pt.

9pt.

10pt.

12pt.

14pt.

18pt.

౮⌀ᬀሼශሼഀઃ⴫㧝౮⌀ᬀሼශሼഀઃ⴫㧞౮

౮⌀ᬀሼශሼഀઃ⴫㧝౮⌀ᬀሼශሼഀઃ⴫
౮⌀ᬀሼශሼഀઃ⴫㧝౮⌀ᬀሼශሼഀ

౮⌀ᬀሼශሼഀઃ⴫㧝౮⌀ᬀሼ
౮⌀ᬀሼශሼഀઃ⴫㧝౮⌀

౮⌀ᬀሼශሼഀઃ⴫㧝

al plates and gen
ts an office mach
while and after
rol over the ink
ickness quality c
ut tools a positive
antly longer than
you with copy qu
ets you and impre
tically separate w
nder constant con
t cylinders to con

imply makes desti
many as copies c
send out you can
uable printed mat
a simplifies the e
compared to a sta
isters and automa
and running off t
nd efficiency to m
ation from pater t
plate the three osd
longer then ordin

stment and runs job no blanket wash your office offset to cut copying costs with this can on automatic changeover from paper masters and automated short rur
n from a pound of ink copy can be run on both sides of the sheet with multiple colors of on a master turning on the machine and running off the copies its not
many sizes of materials on almost all kinds of stock rag bond card stock smooth finish adding new versatility speed and efficiency mated run a choice of optior
en changes are nccessary now advanced fingertip programming single lever action control the inking and dampening system permits the operator to exercise pre
rating cycle greatly reduces repetitive shortrun duplicating time for example when used and impression cylinders that are selfadjusting for changes is paper or r
anually control even though the machine is running on automatic changeover from pater to scales on paper feed that match scales on rceiving tray of machine
t runs to metal plates and general duplicating takes only a matter of seconds the machine includes two ductor rollers and five distributor rollers offset rollers las
s its not a press its an office machine heres practical automation the wide image model nylon for longer wear people who arent acquaited you want it to be it p
a choise of options before while and after copies are run allows the operator to adjust the quality aquamatic control not only assures sharp clean first copies b
o metal plate and from shortrun prese the inking and dampening system permits the three with varying weigts of paper no special adjustments needed cylinders
ollers are large size to insure even distribution of ink the two form rollers are of different machine all without tools a positive vacuum paper feed system keeps
rs soft rollers are made of polyurethane to resist chemical attack most hard rollers are for to gripper master and impression cylinders automatically adjust to th

7

㧙

12

㧙

20

㧙

౮⌀ᬀሼශሼഀઃ⴫㧝౮⌀ᬀሼශ

౮⌀ᬀሼශሼഀઃ⴫

౮⌀ᬀሼශሼ

7

㧙

12

㧙

20

㧙

౮⌀ᬀሼශሼഀઃ⴫㧝౮⌀ᬀሼශ

౮⌀ᬀሼශሼഀઃ⴫

౮⌀ᬀሼශሼ

7

㧙

12

㧙

20

㧙

ABCDEFGHIJKLMNOPQRST

ABCDEFGHIJKL

ABCDEFG

7

㧙

12

㧙

20

㧙

ABCDEFGHIJKLMNOPQRST

ABCDEFGHIJKL

ABCDEFG

5

10

Ǿ

14

Ǿ4.8

C1.5

R1.5

40

PART NO. 4034-7940-01

(TEST CHART NO. KMTC-001-01)

Printed in Japan

MODEL :

MACHINE S/N :

DATE :

EXP. :

MODE :

Text

Photo

Text / Photo

Printing Direction :

Original-Set Direction :

OTHERS :

㧛

AUTO

㧛

͠

㧑

MANUAL( )

TOTAL COUNTER :

1

1

2

2

3

3

3

3

4

4

4

1

4

5

5

5

5

5

5

5

1
2
3
4
5
6
7
8
9

10

2.0

2.5

2.8

3.2

3.6

4.0

4.5

5.0

5.6

6.3

2.2

2.0

2.5

2.8

3.2

3.6

4.0

4.5

5.0

5.6

6.3

2.2

2.0

2.5

2.8

3.2

3.6

4.0

4.5

5.0

5.6

6.3

2.2

2.0

2.5

2.8

3.2

3.6

4.0

4.5

5.0

5.6

6.3

2.2

2.0

2.5

2.8

3.2

3.6

4.0

4.5

5.0

5.6

6.3

2.2

8pt.

9pt.

10pt.

12pt.

14pt.

18pt.

ABCDEFGHIJKLabcdefghijklm1234567890

ABCDEFGHIJKabcdefghijkl12345678

ABCDEFGHIJabcdefghijk1234567

ABCDEFGabcdefg123456789

ABCDEFabcdefg1234567

ABCDEabcdef12345

8pt.

9pt.

10pt.

12pt.

14pt.

18pt.

౮⌀ᬀሼශሼഀઃ⴫㧝౮⌀ᬀሼශሼഀઃ⴫㧞౮

౮⌀ᬀሼශሼഀઃ⴫㧝౮⌀ᬀሼශሼഀઃ⴫
౮⌀ᬀሼශሼഀઃ⴫㧝౮⌀ᬀሼශሼഀ

౮⌀ᬀሼශሼഀઃ⴫㧝౮⌀ᬀሼ
౮⌀ᬀሼශሼഀઃ⴫㧝౮⌀

౮⌀ᬀሼශሼഀઃ⴫㧝

al plates and gen
ts an office mach
while and after
rol over the ink
ickness quality c
ut tools a positive
antly longer than
you with copy qu
ets you and impre
tically separate w
nder constant con
t cylinders to con

imply makes desti
many as copies c
send out you can
uable printed mat
a simplifies the e
compared to a sta
isters and automa
and running off t
nd efficiency to m
ation from pater t
plate the three osd
longer then ordin

stment and runs job no blanket wash your office offset to cut copying costs with this can on automatic changeover from paper masters and automated short rur
n from a pound of ink copy can be run on both sides of the sheet with multiple colors of on a master turning on the machine and running off the copies its not
many sizes of materials on almost all kinds of stock rag bond card stock smooth finish adding new versatility speed and efficiency mated run a choice of optior
en changes are nccessary now advanced fingertip programming single lever action control the inking and dampening system permits the operator to exercise pre
rating cycle greatly reduces repetitive shortrun duplicating time for example when used and impression cylinders that are selfadjusting for changes is paper or r
anually control even though the machine is running on automatic changeover from pater to scales on paper feed that match scales on rceiving tray of machine
t runs to metal plates and general duplicating takes only a matter of seconds the machine includes two ductor rollers and five distributor rollers offset rollers las
s its not a press its an office machine heres practical automation the wide image model nylon for longer wear people who arent acquaited you want it to be it p
a choise of options before while and after copies are run allows the operator to adjust the quality aquamatic control not only assures sharp clean first copies b
o metal plate and from shortrun prese the inking and dampening system permits the three with varying weigts of paper no special adjustments needed cylinders
ollers are large size to insure even distribution of ink the two form rollers are of different machine all without tools a positive vacuum paper feed system keeps
rs soft rollers are made of polyurethane to resist chemical attack most hard rollers are for to gripper master and impression cylinders automatically adjust to th

7

㧙

12

㧙

20

㧙

౮⌀ᬀሼශሼഀઃ⴫㧝౮⌀ᬀሼශ

౮⌀ᬀሼශሼഀઃ⴫

౮⌀ᬀሼශሼ

7

㧙

12

㧙

20

㧙

౮⌀ᬀሼශሼഀઃ⴫㧝౮⌀ᬀሼශ

౮⌀ᬀሼශሼഀઃ⴫

౮⌀ᬀሼශሼ

7

㧙

12

㧙

20

㧙

ABCDEFGHIJKLMNOPQRST

ABCDEFGHIJKL

ABCDEFG

7

㧙

12

㧙

20

㧙

ABCDEFGHIJKLMNOPQRST

ABCDEFGHIJKL

ABCDEFG

5

10

Ǿ

14

Ǿ4.8

C1.5

R1.5

40

PART NO. 4034-7940-01

(TEST CHART NO. KMTC-001-01)

Printed in Japan

MODEL :

MACHINE S/N :

DATE :

EXP. :

MODE :

Text

Photo

Text / Photo

Printing Direction :

Original-Set Direction :

OTHERS :

㧛

AUTO

㧛

͠

㧑

MANUAL( )

TOTAL COUNTER :

8

9

10

10

6

6

7

7

7

7

7

Education & Documentation Division Training Department

How to Use the KM Integrated Test Chart Mar. 2004

2.

Check Procedures

Check Procedures

• Check the gray scale on the copy for the degree of fog.

Check Procedures

• Check how much the line drawn at a point 20 mm from the leading edge devi-

ates in mm on the copy.

Check Procedures

• Check how much the line drawn at a point 20 mm from each of the right and left

edges deviates in mm on the copy.

• Check how much there is a void image in mm from each of the right and left

edges.

Check Procedures

• Measure the dimension between P1 and P4, and that

between P2 and P3, on the image to be measured,
thereby checking for the amount of distortion.

• Measure the dimension between P1 and P2 on the

image to be measured, and that between P1 and P2
on the test chart, thereby determining the horizontal
zoom ratio.

• Measure the dimension between P1 and P3 on the

image to be measured, and that between P1 and P3
on the test chart, thereby determining the vertical
zoom ratio.

1
2

1

2

3

3
4
5
6
7
8
9

10

2.0

2.5

2.8

3.2

3.6

4.0

4.5

5.0

5.6

6.3

2.2

3.6

4.0

4.5

5.0

5.6

6.3

3.6

4.0

4.5

5.0

5.6

6.3

10pt.

12pt.

14pt.

18pt.

ABCDEFGHIJabcdefghijk1234567

ABCDEFGabcdefg123456789

ABCDEFabcdefg1234567

ABCDEabcdef12345

8pt.

9pt.

10pt.

12pt.

14pt.

18pt.

౮⌀ᬀሼශሼഀઃ⴫㧝౮⌀ᬀሼශሼഀઃ⴫㧞౮
౮⌀ᬀሼශሼഀઃ⴫㧝౮⌀ᬀሼශሼഀઃ⴫

౮⌀ᬀሼශሼഀઃ⴫㧝౮⌀ᬀሼශሼഀ
౮⌀ᬀሼශሼഀઃ⴫㧝౮⌀ᬀሼ

౮⌀ᬀሼශሼഀઃ⴫㧝౮⌀

౮⌀ᬀሼශሼഀઃ⴫㧝

al plates and gen
ts an office mach
while and after
rol over the ink
ickness quality c
ut tools a positive
antly longer than
you with copy qu
ets you and impre
tically separate w
nder constant con
t cylinders to con

imply makes desti
many as copies c
send out you can
uable printed mat
a simplifies the e
compared to a sta
isters and automa
and running off t
nd efficiency to m
ation from pater t
plate the three osd
longer then ordin

stment and runs job no blanket wash your office offset to cut copying costs with this can on automatic changeover from paper masters and automated short rur
n from a pound of ink copy can be run on both sides of the sheet with multiple colors of on a master turning on the machine and running off the copies its not
many sizes of materials on almost all kinds of stock rag bond card stock smooth finish adding new versatility speed and efficiency mated run a choice of optior
en changes are nccessary now advanced fingertip programming single lever action control the inking and dampening system permits the operator to exercise pre
rating cycle greatly reduces repetitive shortrun duplicating time for example when used and impression cylinders that are selfadjusting for changes is paper or r
anually control even though the machine is running on automatic changeover from pater to scales on paper feed that match scales on rceiving tray of machine
t runs to metal plates and general duplicating takes only a matter of seconds the machine includes two ductor rollers and five distributor rollers offset rollers las
s its not a press its an office machine heres practical automation the wide image model nylon for longer wear people who arent acquaited you want it to be it p
a choise of options before while and after copies are run allows the operator to adjust the quality aquamatic control not only assures sharp clean first copies b
o metal plate and from shortrun prese the inking and dampening system permits the three with varying weigts of paper no special adjustments needed cylinders
ollers are large size to insure even distribution of ink the two form rollers are of different machine all without tools a positive vacuum paper feed system keeps
rs soft rollers are made of polyurethane to resist chemical attack most hard rollers are for to gripper master and impression cylinders automatically adjust to th

7

㧙

12

㧙

20

㧙

౮⌀ᬀሼශሼഀઃ⴫㧝౮⌀ᬀሼශ

౮⌀ᬀሼශሼഀઃ⴫

౮⌀ᬀሼශሼ

7

㧙

12

㧙

20

㧙

౮⌀ᬀሼශሼഀઃ⴫㧝౮⌀ᬀሼශ

౮⌀ᬀሼශሼഀઃ⴫

౮⌀ᬀሼශሼ

7

㧙

12

㧙

20

㧙

ABCDEFGHIJKLMNOPQRST

ABCDEFGHIJKL

ABCDEFG

7

㧙

12

㧙

20

㧙

ABCDEFGHIJKLMNOPQRST

ABCDEFGHIJKL

ABCDEFG

5

10

Ǿ

14

Ǿ4.8

C1.5

R1.5

40

MODEL :

MACHINE S/N :

DATE :

EXP. :

MODE :

Text

Photo

Text / Photo

Printing Direction :

Original-Set Direction :

OTHERS :

㧛

AUTO

㧛

͠

㧑

MANUAL( )

TOTAL COUNTER :

P1

P4

P2

P3

4

4

4

4

How to Use the KM Integrated Test Chart Mar. 2004

Education & Documentation Division Training Department 2

Check Procedures

• Check the seven points on the copy for good

image density.

• Check for fusing performance.

Check Procedures

• If a scale is not available, take measurement using this 1-mm grid

pattern.

• Determine jitter based on whether the 1-mm grid pattern lines are

properly reproduced.

• Check the lines in the sub scanning direction of the 1-mm grid pat-

tern for straightness.

Check Procedures

• Check how clearly and sharply the five black and white lines drawn

vertically and horizontally are reproduced with an appropriate image
density.

Check Procedures

• Check for white lines, white bands, black lines, black bands, uneven

image, and other image noise in the sub scanning direction.

• Check for black/white contrast.

5

5

5

5

5

5

5

6

2.0

2.5

2.8

3.2

3.6

4.0

4.5

5.0

5.6

6.3

2.2

7

8

Education & Documentation Division Training Department

How to Use the KM Integrated Test Chart Mar. 2004

Check Procedures

• If a scale is not available, take measurement using this 1-mm grid

pattern.

Check Procedures

• Check the solid black on the copy.
• Check for possible faint image on front and rear, and right and left

edges.

9

10