A4 2001 petrol NO(1)

background image

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.

aua401gbb.doc

MAKE

AUDI

MOD.

A4 1.8

YEAR.

01

PETROL
DIESEL

ALARM/SIREN
POSITION

Position the compact alarms and the sirens in the windshield wiper compartment,
passenger’s side, near the battery.

CENTRAL UNIT POSITION

The modular systems and the modules should be positioned under the moquette,
on front of the driver’s side seat, near the black box of the central doors locking
unit.

POWER SUPPLY

+ 30: connect to the original shunting with a 6 mm

2

cable terminal located behind

the black multifunction central unit, placed in an horizontal position, driver’s side.
- 31: Connect directly to the original shunting with a 6 mm

2

cable terminal

located behind the left lateral side on the base of the pillar, driver’s side.

IGNITION WIRE

+ 15/54: Connect to the 2,5 mm

2

BLACK wire located in the wiring harness

coming out of the ignition key.

DIRECTION INDICATORS

Connect to the BLUE/BLACK wire, at the position nr.5 and to the GREEN/BLACK
wire, at the position nr. 7, located in the 23 way black connector of the black
multifunction central unit placed in an horizontal position, driver’s side.

ELECTRIC WINDOWS

Comfort closing
Negative control signal

The closing of the electric windows is obtained timing the BLUE/WHITE wire
located at the position nr. 8, placed in the 12 way, black connector, coming out
of the central incorporated to the windows motor, inside the driver’s side door.

CENTRAL DOORS LOCKING

Negative control signal
Connect to the BLUE/WHITE wire, at the position nr. 8 fot the closing and to the
VIOLET/GREEN wire, at the position nr. 7 located in the 12 way black onnector,
coming out of the central incorporated to the windows motor, inside the driver’s
side door.

IMMOBILISATION POINT

Fuel pump
Cut the 2,5 mm

2

RED/BLUE wire located at the position nr. 32, placed in the

fuse box.

STARTER

+50: Cut the 2,5 mm

2

RED/BLACK wire located in the wiring harness coming out

of the ignition key.

BONNET SWITCH

Connect to the BROWN/VIOLET wire located at the position nr. 20, in the 20
way red connector located under the moquette, on front of the driver’s side seat.

DOORS SWITCH

Connect to the BROWN/WHITE wire located at the position nr. 2, in the 12 way
black connector, coming out of the central doors locking unit placed under the
moquette, on front of the driver’s side seat.

BOOT SWITCH

Connect to the WHITE/YELLOW wire located at the position nr. 16, of the 16
way light brown connector, coming out of the central doors locking unit placed
under the moquette, on front of the driver’s side seat.

X


Wyszukiwarka

Podobne podstrony:

więcej podobnych podstron