Knurling Tool Attachment for Taig Lathe

background image

Making a Knurling Tool for the Taig Lathe

Here are some plans and pictures of a knurling tool I made for my Taig.

Back to the Taig page

This is the overview

C-1 and C-2 should read 1/2" round rod....

Make a Knurling Tool for the Taig

http://www.cartertools.com/knurl.html

1 of 3

4/11/2009 7:24 PM

background image

Completed Knurler

All the parts laid out

Marking pivot holes

Make a Knurling Tool for the Taig

http://www.cartertools.com/knurl.html

2 of 3

4/11/2009 7:24 PM

background image

Simple drill press work

make sure the stack it clamped and aligned...

drilling the 1/2 round pivot radius in one shot - pay very careful
attention to clamping.

Make a Knurling Tool for the Taig

http://www.cartertools.com/knurl.html

3 of 3

4/11/2009 7:24 PM


Wyszukiwarka

Podobne podstrony:
Tool Option for 2009 models [LH, LU, LF, PQ, PS]
94 1363 1372 On the Application of Hot Work Tool Steels for Mandrel Bars
10 129 139 New Tool Steel for Warm and Hot Forging
70 1003 1019 Influence of Surface Engineering on the Performance of Tool Steels for Die Casting
Tool Option for 2009 models [LH, LU, LF, PQ, PS]
milling attachement for myford ml7
high level tool High level Tool Targeted for AVR Controllers
dpf doctor diagnostic tool for diesel cars function list
36 495 507 Unit Cell Models for Thermomechanical Behaviour of Tool Steels
Lynge Odeon A Design Tool For Auditorium Acoustics, Noise Control And Loudspeaker Systems
14 175 184 DE GP4M a New Generation for Tool Steel Casting
how to use the flash tool for Xperia
Camlock for a Lathe Tailstock by Gareth Bellringer
dpf doctor diagnostic tool for diesel cars function list

więcej podobnych podstron