Multifunction Electronic Modules - Generic Electronic Module (GEM)
Mondeo 2007.5 (02/2007-)
Removal and Installation
Removal
CAUTIONS:
Modules must not be swapped between vehicles.
If a new electric box is installed, make sure that the assignments are the same as on the removed electric box.
Installation
1. Refer to:
Battery Disconnect and Connect
(414-01 Battery, Mounting and Cables, General Procedures).
2.
3.
4.
1. To install, reverse the removal procedure.
2. Programme the GEM.
Refer to:
Programmable Module Installation
(418-01 Module Configuration, General Procedures).
3. Configure the GEM.
Refer to:
Module Configuration
(418-01 Module Configuration, General Procedures).
4. Programme the key of the passive anti-theft system (PATS).
Refer to:
Key and Remote Transmitter Programming Using Diagnostic Equipment
(419-01B Anti-Theft - Passive,
General Procedures).
5. Program the remote unlocking remote control.
Refer to:
Remote Keyless Entry (RKE) Transmitter Programming
(501-14 Handles, Locks, Latches and Entry
Systems, General Procedures).
Strona 1 z 1
2012-08-11
http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1449&proc-uid=G551421&gui...