SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

X

MAKE

VOLKSWAGEN MOD.

POLO*

YEAR.

04 �ął PETROL

DIESEL

* Models with original equipment keyless entry system.

ALARM/SIREN

Position the compact alarms and the sirens on the wheelhouse, passenger’s side.

POSITION

CENTRAL UNIT

Position the modular systems and the modules under the dashboard, driver’s side.

POSITION

POWER SUPPLY

+30: connect to the clamp marked �Ś+30’ on the feeding rod, under the dashboard, driver’s side.

-31: connect with a cable terminal directly to the car body.

IGNITION WIRE

+15/54: connect to the wire at the position nr.12 in the wiring harness coming out of the 18 way light brown connector marked XS4, in the central located under the driver’s side dashboard.

DIRECTION INDICATORS

Connect to the WHITE/BLACK and GREEN/BLACK wires located in the wiring harness behind the driver’s side sill cover.

ELECTRIC WINDOWS

Original control signal

The closing of the windows is obtained by means of an original radiocontrol.

ACTIVAT./DEACTIVATION

Connections antitheft/vehicle CONTROLS

Art. 3800

Vehicle

Position

YELLOW/BLACK

VIOLET/YELLOW Wiring harness coming out driver’s side door GREY/BLACK

VIOLET/GREEN

Wiring harness coming out driver’s side door VIOLET

GREEN/BLACK

Wiring harness behind driver’s side sill cover ORANGE

Ground

Car body

VIOLET/WHITE

Ground

Car body

ORANGE/WHITE

Ground

Car body

Refer to the �śA” diagram in the dedicated installation manual inside the kit of the antitheft.

IMMOBILISATION POINT

Fuel pump

Cut the BLUE/WHITE wire located in the wiring harness that supplies the posterior facilities behind the driver’s side sill cover.

STARTER

+50: Cut the BLACK wire located in the wiring harness coming out of the connector of the ignition key.

BONNET SWITCH

Install an additional switch on the front headlamp support plate, driver’s side.

DOORS SWITCH

Refer to the fitting diagram nr. 203.

BOOT SWITCH

Refer to the fitting diagram nr. 203.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed vwpol04gbbt.doc

as per the instructions given on the product installation manual.





SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM NR. 203

Diagram for perimetrical connection with separated lines S5 red connector

in the central unit

under the driver’s

side dashboard

1N4007 diodes

BROWN/BLUE

Position nr. 3

BLACK/GREEN

Position nr. 3

BROWN/WHITE

Position nr. 4

BROWN/YELLOW

Position nr. 6

BLACK/GREY

Position nr.13

S4 brow connector in the

central under the driver’s

1N4007 diodes

side dashboard

BLUE/PINK

(of the antitheft)

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed vwpol04gbbt.doc

as per the instructions given on the product installation manual.