# Cadstar For Windows Default Attribute Names
# Please review the on-line documentation for complete descriptions and more
# information on the usage of these attributes.
Description ANY # Description of attached item
"Component Reference" SYMBOL # Component reference name to be used
# when transferring a symbol to PCB.
"Component Category" SYMBOL # Category of component for use with Adviser
# Placement rule. Valid values are MECHANICAL
# and CONNECTOR.
char_Z NET # Defines the characteristic impedance of a net.
comp_type SYMBOL # Defines a component as a terminator.
# Use the value "term" to indicate a terminator.
current NET # Specifies the current capacity of a net.
c_ground NET # Associates a power net with a ground net.
frequency NET # The operating frequency of a net in MHz.
lengthen_size NET # Specifies the maximum lateral deviation when adding
# "serpentine" route segments.
lengthen_space NET # Specifies the minimum separation when adding
# "serpentine" route segments.
lengthen_style NET # Specifies the style of the segments when adding
# "serpentine" route segments.
net_diff_pair NET # Allows nets that are to be routed in parallel to
# be associated to each other.
net_terminated NET # Defines if a net is correctly terminated.
"Net Route Code" NET # Defines the default route code for the net
# Used by "ECO Update" option when adding connections
net_route_code NET # Alternative to Net Route Code. Use if using ViewLogic
# or Visula.
net_max_delay NET # Maximum allowed delay (in picoseconds) from the source
# pin to the last pin in the net.
net_max_xtalk NET # Specifies the maximum crosstalk allowed on a
# net.
net_shield NET # Specifies the name of the net that should be
# used to shield this net.
net_max_length NET # Defines the maximum permitted route length
# betweent the source pin and the last pin on
# the net.
net_max_stub NET # Defines the maximum permitted length between
# a pin and the major signal path.
net_testpoints NET # Sets the number of testlands that the
# Route Editor will maintain on a net.
"Part Description" SYMBOL # Description of part.
pin_neck_width PIN # Allows a pin to control the width of route segments
# entering it.
pin_order PIN # Defines the connection order of pins in a net.
# Should be applied to each pin in a high speed
# net.
pin_max_delay PIN # Maximum allowed delay (in picoseconds) from the furthest
# source pin to this pin.
pin_min_delay PIN # Minimum allowed delay (in picoseconds) from the closest
# source pin to this pin.
pin_delay PIN # Specifies the additional delay caused by a signal
# passing through a pin of a high speed net.
pin_delay_grp PIN # Used to group pins with similiar delays together.
pin_routing PIN # Suppress thermal relief on power plane pins.
# Set value to "SIGNAL" to isolate pins from
# the power plane.
pin_branch PIN # Used to group pins together in a branch.
pin_diff_pair PIN # Enables parallel routing between sets of pins
# on different nets.
pin_length_grp PIN # Applies a tolerance to the lengths of routes
# in a group of nets.
pin_max_length PIN # Defines the maximum routed length allowed from
# a source pin to the pin with this attribute.
pin_min_length PIN # Defines the minimum routed length allowed from
# a source pin to the pin with this attribute.
ref_voltage NET # The voltage of a power or ground plane.
Value SYMBOL # Value of attached item
Wyszukiwarka
Podobne podstrony:
AttributesBESM New Attributes & Defects 2 0AttributeSet FontAttributeAttributedStringfunction hwapi attributeAttributeSet CharacterAttributeAttributsatzattributes (2)AttributedCharacterIterator AttributeAttributedCharacterIterator AttributeAbstractDocument AttributeContextattributesfunction mcal event add attributeattributeAttributeSetUtilitiesAttributeSet ParagraphAttributeattribut pdfAttributeChangeNotificationAttributedCharacterIteratorwięcej podobnych podstron