{Change Comments ***********************************************************}

{10/24/89
Modified: Anilam Crusader 2 M158.62
For: Apple Computer
Machine has no Z axis drive.
Added literal 'G4' ( Dwell ) to all 'Z' axis call if NOT EmptyLine? is true.
Also added in ToolPath after MoveSXYC for Drilling IF NOT FirstFeat? = TRUE.
Deleted Home in FirstOperation.
Changed comment to 'First Tool In Spindle'.
This Post Processor does not support MultipleParts, WorkFixtureOffsets, Spindle, Speed or Coolant.
Jim Radcliffe}

{10/27/89, deleted all Z calls, using 'G4' only, JR}
{11/3/89, modified per customer requests, JR}
{11/10/89, deleted all 'G80', JR}
{3/28/90, Updated: Anilam Crusader 2 M158.66 to .70.3 format, JR}

{7/24/90, Added InitProg globally to posts with this remark, DWB}
{7/24/90, Replaced all occurances of SetSRXYZero with SetSRXYtoSP, DWB}

{2/13/91
Modified: Anilam Crusader 2 M158.71
Updated to Version 3.2 per Fanuc 6M M001.76.2 Format.
Commented out UseSeparateSubCalls and SetMaxSeparateSubCalls per customer's request.
Changed literal 'E' to literal 'G29E' at all CloseSub commands.
This post processor does not support MultipleParts, SpinOn/Off, Speed or CoolOn/Off.
DWB}

{4/3/91
Modified: Anilam Crusader 2 M158.76.2
For: Gibbs & Associates
Updated to Version 4.0 per Fanuc 6M M001.80 Format.
DWB}

{10/24/91
Modified: Anilam Crusader 2 M158.79
For: Gibbs & Associates
Updated to Version 4.1 per Fanuc 6M M001.81 Format.
DWB}

{5/1/92
Modified: Anilam Crusader 2 M158.81
For: First Brands
Added literal 'AUX 1400' to the beginning of the prog.
Added SpinOn/Off capabilities to the prog and the form.
Changed the 'G4T0' and the IF ToolChangeAtHome? to a literal 'CALL 1'
this calls a sub that the customer has built into his system.
At the end of the prog the customer also requested a 'SUB 1' literal to be called
to call a built in sub.
KLM}

{Prog Numeric Format Definitions *******************************************}

#1 = '#.00'
#2 = '###.###;0.'
#3 = '*###.###;0.'
#4 = '####.####;0.'
#5 = '########;0'
#6 = '#.###;0.'

FORMAT(FileFeet#,1)
FORMAT(FileMeters#,1)
FORMAT(ToolDiameter#,4) {.72}
FORMAT(Program#,5) {.72}
FORMAT(Operation#,5) {.72}
FORMAT(Tool#,5) {.72}
FORMAT(Parts#,5) {.72}
FORMAT(Tag#,5)
FORMAT(Dwell#,6)
FORMAT(Peck#,6)

{Prog Subroutines **********************************************************}

DoSubComment:
IF UseComments? AND SubComment?
'( SUB NUMBER: ' Tag# ' )' EOL
END
RETURN

DoOpComments:
IF UseComments?
SetScale('1')
IF OperationIDComment?
'( OPERATION ' Operation# ': ' OperationType$ ' )' EOL
END
IF OperationComment?
'( ' OperationComment$ ' )' EOL
END
IF WorkGroupComment?
'( ' WorkGroupComment$ ' )' EOL
END
IF ToolTypeComment?
'( TOOL ' Tool# ': ' ToolDiameter# ' ' ToolType$ ' )' EOL
END
IF ToolComment?
'( ' ToolComment$ ' )' EOL
END
IF Metric? {CAM file is in Metric, tools and tool path}
SetScale('.03937007874') { change to English, this is an English post}
END
END
RETURN

PSInit: {reset flags}
RotateF
RETURN

PSStuff: {revised.72}
IF FourthCW?
FORMAT(FourthDegree#,2)
SeqC 'A' FourthDegree# EOL
FourthCWF {reset flag}
END
IF FourthCCW?
FORMAT(FourthDegree#,3)
SeqC 'A' FourthDegree# EOL
FourthCCWF {reset flag}
END
IF FifthCW?
FORMAT(FifthDegree#,2)
SeqC 'B' FifthDegree# EOL
FifthCWF {reset flag}
END
IF FifthCCW?
FORMAT(FifthDegree#,3)
SeqC 'B' FifthDegree# EOL
FifthCCWF {reset flag}
END
RETURN

DoPostScript:
PSInit
EachPS
SeqC PostScript EOL {literals}
PSStuff {commands}
NextPS
RETURN

DoEndOpPS:
PSInit
EachEOPS
SeqC EndOpPS EOL {literals}
PSStuff {commands}
NextPS
RETURN

GetG4:
SeqC 'G4' EOL
RETURN

EntryMove:
IF FeedEntry?
SeqC Feed FeedEnt EOL
END
GetG4
RETURN

StartSub:
OpenSub
DoSubComment
SeqC 'G29S' Tag# EOL
RETURN

SubWarning:
IF NOT FeedConnect?
IF AnyZshift?
' ' EOL
'( WARNING Z CLEARANCE WILL CHANGE WITH EACH CYCLE OF SUB REPEAT )' EOL
' ' EOL
END
END
RETURN

StdSub:
SeqC 'G29D' RepCycs EOL
SeqC 'G29C' Tag# EOL
SeqC 'G29E' EOL
StartSub
RETURN

FinishSub1: {part 1}
SeqC CRCOffC EOL
IF NOT FeedConnect?
GetG4
END
RETURN

FinishSubG92: {part 2}
SeqC 'G29E' EOL { EndSub }
CloseSub
RETURN

FormatArc:
IF ArcCW?
CWArc
ELSE
CCWArc
END
MoveXY
IF ArcIJFormat?
ArcIJ
ELSE
ArcR
END
RETURN

StdLine: {enables CRC on first call, .70}
IF Decelerate?
IF RoomToDecel?
DecelMove1
SeqC CRCOnC FeedC MoveXYC FeedRateC EOL
DecelMove2
END
SeqC CRCOnC FeedC MoveXYC DecelFeed EOL
ELSE
IF XMove? OR YMove?
SeqC CRCOnC FeedC MoveXYC FeedRateC EOL
END
END
RETURN

ToolPath:
EACHFeat
IF PointFeat?
IF AutoCycle?
SeqC MoveSXYC EOL
SeqC 'G29D1' EOL
SeqC 'G29C' Tag# EOL
SeqC 'G29E' EOL
CalcACSRXY {calc tool position after sub call, CalcAutoCycleStatusRecordXY}
ELSE
SeqC MoveSXYC EOL {.80.01}
IF NOT FirstFeat?
GetG4
END
END
ELSE
IF RapidFeat?
IF LastFeat? AND AutoCycle? {.70}
SeqC CRCOffC EOL
SeqC RapidC MoveXYC EOL
ELSE
IF XMove? OR YMove?
SeqC RapidC MoveXYC EOL
END
END
ELSE
IF LineFeat?
IF AutoCycle? {.70}
IF LastFeat?
SeqC CRCOffC EOL
SeqC FeedC MoveXYC FeedRateC EOL
ELSE
StdLine {enables CRC on first call}
END
ELSE
StdLine
END
ELSE
IF ArcFeat?
EACHQuadrant { Do not use NOT, FIRST, LAST or NEXT modifiers in this loop }
IF LastQuadrant? AND Decelerate?
IF RoomToDecel?
DecelMove1
SeqC FormatArc ArcFeedC EOL
DecelMove2
END
SeqC FormatArc DecelFeed EOL
ELSE
SeqC FormatArc ArcFeedC EOL
END
NEXTQuadrant
END
END
END
END
NEXTFeat
RETURN

WFOStuff:
{ NOTE: This Post Processor does not support WorkFixtureOffsets. }
RETURN

AutoCycCutSub1: {part 1}
SaveSubStatus {save tool position}
SetPass1 {element cut moves}
StartSub
SetSRXYtoSP
SetInc
RETURN

AutoCycCutSub2: {part 2}
ToolPath
SetAbsOrInc
IF Repeats? AND FeedConnect? AND ZshiftOnly?
ELSE
IF FIFO? {.81}
SeqC FeedC FeedRateC EOL
ELSE
SeqC RapidC EOL {.71.2 removed CRCOffC, gets turned off in ToolPath}
END
GetG4
END
SeqC 'G29E' EOL { EndSub }
CloseSub
SetSRSubXY {restore SR to 1st position value}
SetSRSubMove
RETURN

AutoCycPat:
SetPass2 {position pattern}
ToolPath {call after TagInc for correct sub calls}
SetPass1 {reset}
RETURN

Milling:
IF AutoCycle?
TagInc
AutoCycCutSub1
EntryMove
AutoCycCutSub2
AutoCycPat
ELSE
EntryMove
ToolPath
END
RETURN

G92Sub:
SubWarning
StdSub
SetAbsOrInc
SeqC Connect StrtPos EOL
Milling
FinishSub1
FinishSubG92
RETURN

ZonlyRepAutoCycle:
AutoCycPat {write pattern moves and main calls}
StartSub
TagInc
EachCycle
IF FeedConnect?
SeqC Feed FeedEnt EOL
GetG4
ELSE
IF FeedEntry?
IF NOT FirstCycle?
SeqC Rapid EOL
GetG4
END
SeqC Feed FeedEnt EOL
GetG4
ELSE
SeqC Rapid EOL
GetG4
END
END
IF FirstCycle?
SetStatusOff {protect Z position for incremental sub}
END
SeqC 'G29D1' EOL
SeqC 'G29C' Tag# EOL
SeqC 'G29E' EOL
NextCycle
SetStatusOn
AutoCycCutSub1 {build element sub}
AutoCycCutSub2
{.69, removed FinishSub1}
IF FeedConnect? {there is no Z up in the sub, .69}
IF FIFO? {.81}
SeqC Feed FeedRate EOL {.69}
ELSE
SeqC Rapid EOL {.69}
END
GetG4
END {.69}
SeqC 'G29E' EOL { EndSub }
CloseSub
{Element shift, not pattern}
RETURN

ZonlyRep:
EachCycle
IF NOT FirstCycle?
SeqC Connect StrtPos EOL {.71.2, added Connect}
END
IF FeedConnect?
SeqC FeedC FeedEnt EOL {.71.2, changed to FeedC}
GetG4
ELSE {Entry/Exit Connect}
IF FeedEntry?
IF NOT FirstCycle?
SeqC RapidC EOL {can't call for cycle =1} {.69 added Rapid, reads better} {.71.2, changed to RapidC, reads better}
GetG4
END
SeqC Feed FeedEnt EOL
GetG4
ELSE
SeqC RapidC EOL {.69 added Rapid, reads better} {.71.2, changed to RapidC, reads better}
GetG4
END
END
SeqC 'G29D1' EOL
SeqC 'G29C' Tag# EOL
SeqC 'G29E' EOL
NextCycle
StartSub
ToolPath
FinishSub1
SeqC 'G29E' EOL { EndSub }
CloseSub
RETURN

CheckPass:
IF AutoCycle? {use the correct StrtPos}
SetPass2
ELSE
SetPass1
END
RETURN

GetStartOfSameTool:
Plane { No OutPut }
SetAbsOrInc
DoOpComments
DoPostScript
CheckPass
RETURN

{Start of executable Prog **************************************************}

{setup and initializations}
InitProg
ReverseXZArcs
SkipZ
SetMaxFeed('500')
IF PSComment? AND UseComments?
'PostScript:' EOL
' Literals: put between single or double quotes.' EOL
' Separate commands and literals with at least one space.' EOL
' A CR ( RETURN key ) will start a new line.' EOL
' Commands: may be capital and/or lower case letters. Separate commands with a space.' EOL
' EndOP -' EOL
' all literals and commands before an ENDOP command' EOL
' will appear at the beginning of the operation. All ' EOL
' literals and commands after an ENDOP command will appear' EOL
' at the end of the operation. ' EOL
' 4thAxisCW(12.5), 4ACW(12.5) -' EOL
' generates a + A move of the value you specify' EOL
' 4thAxisCCW(22.5), 4ACCW(22.5) -' EOL
' generates a - A move of the value you specify' EOL
' 5thAxisCW(30), 5ACW(30) -' EOL
' generates a + B move of the value you specify' EOL
' 5thAxisCCW(22.5), 5ACCW(22.5) -' EOL
' generates a - B move of the value you specify' EOL
END
IF MultipleParts?
'**** This post does not support MultipleParts ****' EOL
END
EachOp {Start of post processing *********************}
IF FirstOperation?
EOR EOL
SeqC 'AUX 1400' EOL
IF ToolChangeAtHome?
SetHome
END
IF UseComments?
IF ProgramNameComment?
'( PROGRAM: ' ProgramName$ ' )' EOL
END
IF ProgramComment?
'( ' ProgramComment$ ' )' EOL
END
IF FormatNameComment?
'( FORMAT: ' FormatName$ ' )' EOL
END
IF TimeComment?
'( ' Date$ ' AT ' Time$ ' )' EOL
END
IF MovesComment?
'( OUTPUT IN ' MoveType$ ' INCHES )' EOL
END
IF PartsComment?
'( PARTS PROGRAMMED: ' Parts# ' )' EOL
END
IF StartToolComment?
'( FIRST TOOL IN SPINDLE )' EOL
END
END
OpenSub
IF Metric? {CAM file is in Metric, tools and tool path}
SetScale('.03937007874') { change to English, this is an English post}
END
DoOpComments
DoPostScript
SetAbs
Plane { No OutPut }
Seq CRCOff 'G52G70' EOL
SeqC 'T0' EOL
SeqC ToolOfst EOL
SeqC SpinOn EOL
CheckPass
SetAbsOrInc
SeqC Rapid StrtPos EOL
ELSE
IF NewTool?

{Finish off last Operation}

DoEndOpPS
SeqC 'CALL 1' EOL
IF LAST ProgStop?
GetG4
ELSE
SeqC ProgStop EOL {G4}
END

{Start new Operation}

Seq OpToolID EOL
DoOpComments
DoPostScript
SetAbs
Plane { No OutPut }
SeqC CRCOff EOL
SeqC ToolOfst EOL
SeqC SpinOn EOL
CheckPass
SetAbsOrInc
SeqC Rapid StrtPos EOL
ELSE
IF SameTool?
DoEndOpPS
IF LAST ProgStop?
SeqC 'T0' EOL
GetG4

{Start new Operation}

GetStartOfSameTool
SeqC Rapid StrtPos EOL
SeqC ToolOfst EOL
ELSE
IF NewToolOffset?
SeqC 'T0' EOL

{Start new Operation}

GetStartOfSameTool
SeqC Rapid StrtPos EOL
SeqC ToolOfst EOL
ELSE

{Start new Operation}

GetStartOfSameTool
SeqC Rapid StrtPos EOL
END
END
END
END
END {common point for all operations}
IF Milling?
IF Repeats?
TagInc
IF ZshiftOnly?
IF AutoCycle? {incremental Autocycle sub can have Z moves}
ZonlyRepAutoCycle
ELSE {Z shift only, NOT Auto Cycle}
IF UseSeparateSubCalls? AND CyclesLessThanMaxSubCalls?
FindAnyZMoves {for normal abs subroutine}
IF NoZMoves?
ZonlyRep
ELSE
G92Sub {pattern shift, not element}
END
ELSE {no sep subs desired}
G92Sub
END
END {end Auto Cycle IF}
ELSE {not Z only}
G92Sub
END {end Z only IF}
ELSE {no repeat OPs}
Milling
END
SeqC CRCOffC EOL
GetG4
ELSE
IF Drilling?
IF Repeats?
NewProg
TagInc
StdSub
SetAbsOrInc
SeqC Rapid StrtPos EOL
END
GetCycle
GetG4
ToolPath
IF Repeats?
FinishSubG92
END
GetG4
END
END
NextOp {loops back to EachOP until last Operation}

{End of program ************************************************************}

{finish last operation}
DoEndOpPS
SeqC 'CALL 1' EOL
SeqC 'SUB 1' EOL
IF ProgStop?
GetG4
END
SeqC 'G29E' EOL
CloseSub
Post2 {organize Subs into one program}
SeqC 'G29E' EOL
EOR EOL
Close
IF UseComments?
SetScale('1') {restore scale for comments}
Reopen
IF FileBytesComment?
'( FILE LENGTH: ' FileBytes# ' CHARACTERS )' EOL
END
IF FileFeetComment?
'( FILE LENGTH: ' FileFeet# ' FEET )' EOL
END
IF FileMetersComment?
'( FILE LENGTH: ' FileMeters# ' METERS )' EOL
END
Close
END