SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
PETROL
AUDI A2 04 2nd sem. DIESEL

MAKE MOD. YEAR
X
ALARM/SIREN Position the compact alarms and the sirens on the support of the shock absorber
POSITION passenger s side. Pass the cables through the original rubber core hitch located on the
panel in the engine compartment, passenger s side.
CENTRAL UNIT POSITION Position the modular systems and the modules under the dashboard, driver s side.
POWER SUPPLY +30: connect to the 6 mm2 RED wire located on the connectors holder plate under the
moquette on front of the driver s side seat.
- 31: connect to a ground cable located behind the left lateral bulkhead.
IGNITION WIRE +15/54: connect to the WHITE/BLACK wire, at the position nr. 15, in the 17 way light
brown connector, on the connectors holder plate, under the moquette on front of the
driver s seat.
DIRECTION INDICATORS Connect to the wires: GREEN and WHITE/BLACK wires in the bundle of cables
coming out of the multiway connector, on the left of the steering column.
ELECTRIC WINDOWS Negative control signal
Time to 24s the GREY/GREEN doors locking wire at the position nr. 8 in the 12 way
connector on the central located inside the driver s side door.
CENTRAL DOORS LOCKING Negative control signal
Connect to the GREY/GREEN wire (lock) at the position nr.8 and to the
GREY/VIOLET wire (unlock) at the position nr.7, located in the 12 way connector, on
the central inside the driver s side door.
IMMOBILISATION POINT Gasoil pump
Cut the BROWN/BLUE wire, in the relay marked 219, fixed in the battery space under
the driver s side moquette.
STARTER +50: Cut the RED/GREEN wire located in the wiring harness coming out of the ignition
key.
BONNET SWITCH Connect to the YELLOW/RED wire at the position nr. 15, in the 17 way red connector,
behind the driver s side sill cover.
DOORS SWITCH Connect to the BROWN/WHITE wire in the 10 way light brown connector on the
comfort central placed under the moquette, on front of the driver s seat.
BOOT SWITCH Connect to the BROWN/VIOLET wire, at the position nr. 11, located in the 16 way light
brown connector, on the connector holder plate, under the moquette, on front of the
driver s seat.
aua204gbd2s.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.