{
MILL=T
LATHE=F
SIMPLE_ROT_POS=F
ROTARY_MILL=F
ADV_MILL=T
SUBS=T
MILLTURN_Y-AXIS=F
METRIC=T
}

{Change Comments ***********************************************************}

{
10/24/94 [cwh]
B001.81.4 ( from B001.81.3 )

Made changes to ZOnlyRep and FinishSub1 subs to properly handle
Feed connects and clearance moves.
}

{11/8/94
Modified: Fanuc 6M (FW) B001.81.4
For: Gibbs & Associates
Versions: Catalyst v2.14.12C/Compost 4.21.23
Changes made per Pete Jackson
Charles reported a problem involving operations that do not change coordinate systems from
previous operations.
Added ClearCSOffset at NotSameToolWFO and SameToolWFO subs.
DWB}

{
12/01/94
B001.81.6
Changed FirstOp3 to call out A0B0 to move to the first CS.
When possible, this should be changed to check the MDD and only call out the axes that
make sense.

Added RecallWFO sub-routine to NotSameToolWFO and SameToolWFO to ouput the current fixture offset
and A0B0. Added for easier restarts at the machine. Both are only called from NoMPs.
When possible, this should be changed to check the MDD and only call out the axes that
make sense.
}

{
12/02/94
Changed version number to .00 from .81
TH}

{
Format: Fanuc 6M (FW) B001.00.01
12/08/94
Added AAxisAvail? and BAxisAvail? checks to CSAngleA and CSAngleB subs
Added WFO1 and A0B0 if AxisAvail to End2:
TH}

{
Format: Fanuc 6M (FW) B001.00.01
12/09/94
Fixed RecalWFO to check AAxisAvail? and BAxisAvail?
Cleaned up FirstOp3 to use new checks placed in CSAngleA and CSAngleB
TH}

{
Format: Fanuc 6M (FW) B001.00.03
12/19/94
Added ClearCSOffset to OpenMP: CloseMP: and SubCSMP:
Added if AChange? OR BChange? to home postition call-out in SameToolOp1
Started using Flag('3') to determine toggle between incrementing through MPs and decrementing through MPs
Changed CloseMP to check Flag('3'). If true, the WFOs will increment from first to last. If false, the WFOs will
decrement from last to first.
Example:
TRUE for 4 parts: G54P1, G54P2, G54P3, G54P4
FALSE for 4 parts: G54P4, G54P3, G54P2, G54P1
This is most useful for tombstone machining on rotary tables. With this method, the code will machine part1, rotate, part2,
rotate, part3, rotate, part4, tool change, part4, part3, part2, part1, toolchange, etc. It minimizes the rotation and also
stops the machine from "winding up".
To do this a new sub was created called ToggleIncDecWFO. The flag is set to true in ProgStart and toggled inside CloseMP
after running through the parts
Replaced SetZRepInc and RestoreAbsOrInc with one sub called DoAbsOrInc. Any line with SetZRepInc now
has DoAbsOrInc as the first command after the SeqC.
TH}

{
Format: Fanuc 6M (FW) B001.00.04
1/10/95
NewToolOp3 now has an AbsOrInc on the line that calls out the Plane 'G80' CRCOff
NewToolOp5 no longer has the AbsOrInc command
NewToolOp5b has been created and has the AbsOrInc command
Changed MP1ToollAllPfu to call NewToolOp5b
Added AbsOrInc and Rapid to the FirstOperation? section of MP1ToollAllPXcp
Added Rapid to the NewTool? section of MP1ToollAllPXcp
Started using Flag ('4') to turn on Inc/Dec WFO's (See above). True means use Inc/Dec WFO's.
MP1ToollAllPXcp, MP1ToollAllPFU, and MPallTools1P now output WFO if NOT WorkFixtureOffsets?
TH}

{
Format: Fanuc 6M (FW) B001.00.05
1/13/95
Replaced TrackZNO# ZDepth# with TrackZNO# FIRST SPZ# in the drilling section
Formatted TrackZNO# to #4
}

{
Format: Fanuc 6M (FW) B001.00.06
2/15/95
Fixed RecallWFO: to output correct WFO# if WFOCS
TH}

{ Added ClearCSOffset to SubCSMP TH}

{
Format: Fanuc 6M (FW) B001.10
7/27/95
Added G52 style output for too many coordinate systems
Updated to .10 format
TH}

{1/17/96, Updated .10 to .11 version, MPK}

{2/26/96
Initial: Fanuc 6M (FW) B001.11
Created: Fanuc 6M (FW) B001.11.01
Develop: ComPost 4.21.34, Catalyst68K v3.02.02C
Comment: Corrections to Processor.
Corrected format of CSOffsetA# and CSOffsetB#.
To correct multiple parts output:
Added "OR Flag?('2')" to "IF WFOCS?" in "SubCSMP:".
To Simplify prog subs and correct errors in MP1ToollAllPXcp:
Changed FirstOp3a/NewToolOp5a to FirstOp4/NewToolOp6
Deleted NewToolOp5b sub and changed call to NewToolOp5 (they were identical!)
Deleted OfstOn and Cool On from FirstOp3/NewToolOp5
Added calls to FirstOp4/NewToolOp6 after calls to FirstOp3/NewToolOp5.
Changed StrtPos in MP1ToollAllPXcp to FirstOp3/NewToolOp5.
To correct a literal number 2 from being output when processing multiple parts:
Changed order of booleans from:
IF WFOCS? OR Flag?('2')
to:
IF Flag?('2') OR WFOCS?
Modified WFO Handling:
Changes:
Deleted RecallWFO sub. It was not used!
Deleted NotSameToolWFO & SameToolWFO subs.
Added WFOStuff sub.
Changed all WFO calls in main loops to WFOStuff.
Results:
Changes do not effect Multiple Parts output.
Correct WFO is output by default at the beginning of each tool.
G52, if used, is output by default at the beginning of each tool.
G52, without WFO, is output at SameTool only if there is a change.
Jim Radcliffe}

{4/17/96
Initial: Fanuc 6M (FW) B001.11.01
Created: Fanuc 6M (FW) B001.12.01
Comment: Changed version number to reflect new identification scheme.
Jim Radcliffe}

{6/14/96
Initial: Fanuc 6M (FW) B001.12.01
Created: Fanuc 6M (FW) B001.12.02
Comment: Modified CRC handling to reflect the way I do it and same as M001.89.
Jim Radcliffe}

{6/24/96
Initial: Fanuc 6M (FW) B001.12.02
Created: Fanuc 6M (FW) B001.12.03
Comment: Added Missing prog formatter for CSSubID#.
Jim Radcliffe}

{6/24/96
Initial: Fanuc 6M (FW) B001.12.03
Created: Fanuc 6M (FW) B001.12.04
Comment: In MP1ToollAllPXcp added positioning BEFORE OfstOn!
Jim Radcliffe}

{6/24/96
Initial: Fanuc 6M (FW) B001.12.04
Created: Fanuc 6M (FW) B001.12.05
Comment: Simplified
reduced nnnnOp# sub calls to reflect the MPs cut off points.
Moved WFOstuff to FirstOp1 & NewToolOp3
Jim Radcliffe}

{6/25/96
Initial: Fanuc 6M (FW) B001.12.05
Created: Fanuc 6M (FW) B001.12.06
Comment: Further simplified WFO handling.
Jim Radcliffe}

{8/10/96
Initial: Fanuc 6M (FW) B001.12.06
Created: Fanuc 6M (FW) B001.12.07
Comment: Modifications per bug reports from Aavid, myself and Danny Ball
Corrected output of MultipleParts WorkFixtureOffsets OneToolAllParts ExitClearancePlane.
Modified WFOStuff sub to allow output for MultipleParts WorkFixtureOffsets
The output was being suppressed!
I then simplified WFOStuff sub.
Added DecWFO after NextWFO and added IncWFO after NextPrevWFO.
This will leave the output of WFOStuff on the correct WFO!
In doing the above fixes, OpenMP and CloseMP were modified with no change to output.
Added 2 new Prog Subs DoCSWFOOps & DoCSG52Ops
This simplifies and shortens the prog and CloseMP
Deleted the use of Flag#2
It was just the opposite of the WFOCS boolean!
Corrected returning A and B axis in End2 per Danny Ball
Jim Radcliffe}

{8/12/96
Initial: Fanuc 6M (FW) B001.12.07
Created: Fanuc 6M (FW) B001.12.08
Develop: ComPost2 68k, Catalyst68K v3.04.10.C
Comment: Corrected output of WFOStuff & Simplified WFO subs.
Deleted the use of NeedWFO1 boolean
Added Flag #2 to control output of WFOStuff.
Jim Radcliffe}

{10/2/96,
Initial: Fanuc 6M (FW) B001.12.08
Created: Fanuc 6M (FW) B001.14
Simplified Toolpath Linefeat by the addition of CkCRC and CkCRCNum subs.
MPK}

{10/2/96,
Initial: Fanuc 6M (FW) B001.14
Created: Fanuc 6M (PW) C001.14
modified for partial WFO output, MPK}

{11/22/96
Versions: Catalyst v3.23C/Compost 4.21.37/v1.0b1
.14 Additions:
Deleted Flag(2) for CRCOffsetC at ckCRC and ckCRCNum subs and at setup and initializations.
Added NOT LastFeat? AND Equal? SPZ# EPZ# condition at ckCRCNum sub.
Moved contents of FormatLine back to ToolPath LineFeat.
Modified WorkFixtureOffset logic.
Added Flag(2) for WFOStuff at setup and initializations.
Added SetFlag(2) for EquallySpacedOffsets at OpenMP sub.
Added WFONum sub.
Rewrote logic at WFOStuff sub.
Added EOL to NewWFO MP WFOStuff sub Warning.
Deleted SeqC and EOL at WFOStuff sub.
Added Flag(2) logic at start of EachOp/NextOp Loop.
Moved WFOStuff after MP-OTAP-FU condition at FirstOperation and NewTool.
Added WFOStuff for MP-OTAP-ECP condition at FirstOperation and NewTool.
Added AbsOrInc Rapid to StrtPos block for MP-OTAP-ECP condition at FirstOperation and NewTool.
Added SeqC and EOL at WFOStuff calls at GetStartOfSameTool, FirstOperation and NewTool.
Added SetMaxFeed(12700) for Metric VNC files.
Moved Speed SpinOn after MP-OTAP-FU condition at FirstOperation and NewTool.
Added Speed SpinOn for MP-OTAP-ECP condition at FirstOperation and NewTool.
DWB}

{2/25/97
Modified: Fanuc 6M (PW) C001.14m
Created: Fanuc 6M (PW) C001.15m
For: Gibbs & Associates
Versions: Catalyst v3.30C/ComPost2 MSL 68K
Corrected problem with StrtPos for MultipleParts OneToolAllParts ExitClearancePlane.
Only concerns WFOCS and G52 style programs.
Post was not outputting good position in Main Program Output for FirstOperation only.
Problem was corrected by doing ClearCSOffset prior to StrtPos.
Rewrote code at following subs:
Added ClearCSOffset at CSG52 sub.
Rewrote logic at G52Stuff sub.
Corrected problem with CS related stuff not being output.
Caused by only testing AAxisAvail.
Added BAxisAvail test at DoCSComment sub.
Added AAxisAvail test at DoCSWFOComment sub.
Added BAxisAvail test at DoCSWFOComment sub.
Changed name of OffsetComments sub to CSComments and rewrote logic.
Modified handling of G52 style output for MultipleParts WorkFixtureOffsets.
Only concerns AllToolsOnePart and OneToolAllParts FullUp situations.
Reduces length of file by eliminating redundancy of G52 blocks.
Moves G52 blocks from Main Program to Sub Programs.
Extra unnecesary sub programs are combined into fewer subs.
Returns to old M001 style of handling MultipleParts WorkFixtureOffsets.
New style only needed for WFOCS style programs.
Rewrote logic at DoCSG52Ops sub.
Rewrote logic at OpenMP sub.
Rewrote logic at DoCSWFOOps sub.
Rewrote logic at CloseMP sub.
Changed IF WorkFixtureOffsets? to IF WFOCS? at SubCSMP sub.
Added Flag(5) to Suppress Redundant WFO for MultipleParts WorkFixtureOffsets programs.
Only concerns OneToolAllParts ExitClearancePlane situations.
NOTE: I believe there is a bug with ToolChanges.
For WFOCS and G52 style programs, FirstHome command at End2 sub is outputting absolute,
unshifted CS#1 value regardless of final CSGroup.
Should be shifted value corresponding with active CSGroup consistant with NewToolOp2 sub.
For MultiplePart EquallySpacedOffsets programs, Home command at NewToolOp2 sub and FirstHome
command at End2 sub are outputting shifted values corresponding with active CSGroup.
Should be absolute, unshifted CS#1 value.
These bugs have not been verified and are only my observations while testing the Tutorial Part.
DWB}

{5/15/98,
Updated: Fanuc 6M (PW) C001.15m
Created: Fanuc 6M [PW] C001.16m
For: Gibbs & Associates
Versions: Catalyst v4.23.13(mac)/ComPost2 1.1b3
Corrected support for Linear ChangeCS.
Linear ChangeCS covers Multiple CSGroups in One Plane.
Post does not output CSWFOComments, G52Comments or G52Stuff for this situation.
IF AAxisAvail? OR BAxisAvail? does not automatically support this.
Deleted IF AAxisAvail? OR BAxisAvail? at G52Stuff, DoCSComment and DoCSWFOComment.
Post retracts Tool at SameTool for this situation.
Retraction is only necessary for AChange OR BChange situations.
Changed ChangeCS? to AChange? OR BChange at SameToolOp1.
Changed ChangeCS? to AChange? OR BChange at SameToolOp3.
Simplified ClearCSOffset occurance.
ClearCSOffset occurs at 5 different places, including at the output of CSComments.
Discovered that CheckPass is a good place for all situations.
Deleted ClearCSOffset at CSComments.
Caused simplification of Procedure.
Deleted ClearCSOffset at CSG52, DoCSWFOComment, OpenMP and SubCSMP Procedures.
Added ClearCSOffset at CheckPass.
Additional modifications.
Moved IF FirstOperation? OR NewTool? OR ChangeCS? Boolean from CSG52 to G52Stuff.
Moved DoSubComment Procedure to before DoOpComments Procedure.
To keep CSStuff together.
Moved call to CSComments Procedure to inside IF UseComments? Boolean at DoOpComments.
To suppress when Comments are turned off.
Added AbsValueC, IncValueC and AbsOrIncC Procedures.
Simplifies readability of Prog.
Reduces redundancy of output.
Allows us to return to earlier versions
Improves upon earlier problem with incremental output of ShiftPC command at CloseMP while
allowing us to return to .85 OfstOff blocks.
AbsValueC called from AbsOrIncC.
IncValueC called from AbsOrIncC, DoAbsOrInc and DoDrillAbsOrInc.
IncValueC called for OfstOff Blocks at NewToolOp1, two places at SameToolOp1 and DoAbsOrInc.
AbsOrIncC called for ShiftPC Block at CloseMP.
AbsOrIncC called from DoAbsOrInc, DoDrillAbsOrInc and RestoreAbsOrInc.
AbsOrIncC called for Home Block at NewToolOp2.
AbsOrIncC called for FirstHome Block at End2.
Added CRCOffC at AutoCycCutSub2.
Corrects unique situation in ZonlyRepAutoCycle where one Operation is CRCLeft and LastFeat
is an ArcFeat followed by another Operation that is CRCRight.
CRCOffC did not get output at end of CRCLeft Operation and CRCOnC did not get output at start
of CRCRight Operation.
Oddly, CRCOnC only outputs if CRCOffC has been output, not if CRCSide changes.
Moved call to InitOp Procedure to top level at end of Prog.
Personal Preference.
6/18/98
Changed to Lowercase Procedure Names.
Added comments to all SetFlag, SetFlagF and IF Flag statements.
Added Flag(6) to switch from B-Style to C-Style at progStart.
TRUE = B-Style Output, FALSE = C-Style Output.
Added Flag(7) to switch from local coordinates to uncompensated coordinates at progStart.
TRUE = Local WFO Coordinates, FALSE = D-Style Output.
Added pertinent comments at progStart.
Added IF Equal? NumOfCS# Num#('1') at progStart.
This is a standard 3 Axis - Output M-Style.
Changed Seq to SeqC at autoCycCutSub1.
Added CRCOffC to AutoCycle ZCP3C at end of IF Milling?
Moved CRCOffC to before FeedC and RapidC for ZCP3C at end of IF Milling?
To stay consistant with CRCOnC/CRCOffC Rapid/Feed/CWArc/CCWArc throughout Prog.
Changed literal 'G80' to DrillOff at end of IF Drilling.
Changed literal 'G80' to DrillOff at firstOp1 and newToolOp3.
To allow for change in FORM without having to recompile.
Changed SpeedC to Speed at for LAST ProgStop condition at sameToolOp3.
6/30/98
Deleted Gibbs System XYRepeat support.
Virtual only support ZShiftOnly Repeats.
Rewrote OpGuts Procedure.
Limited Milling Repeats to ZShiftOnly at IF Milling.
Deleted Drilling Repeats at IF Drilling.
Rewrote PostScript instructions at progStart.
7/22/98
Reverted back to Gibbs System XYRepeat support.
IF setup correctly, Virtual will support XShift and/or YShift Repeats for both Contour and
Patterns.
Rules for correct setup (as best as I understand at the moment).
Geometry CSGroup must be oriented to a plane that intersects CS#1 in a perpendicular direction.
Example, XZPlane and YZPlane, and any oriented rotation of either Plane around the XYPlane.
Any change in the ZPitch of the Origin will cause ZShiftOnly Repeat Operation.
Set Desired ZStep so that Operation will result in multiple passes.
NOTE: If correctly setup, ZStep would be misleading.
Step will be in line with depth axis of CSGroup.
Restored related code to OpGuts Procedure.
ZShiftOnly Contour Operations remain Full SepSub.
Any customer requesting G92 Style will require copying code from archives.
Deleted Deceleration from ToolPath LineFeat and ArcFeat.
There are plans to support this in the future through the use of Construction Tools in the
Virtual Process.
9/1/98
Added forced FeedRate for RI-RO Milling Operations.
When a RI-RO Operation follows either a FI-RO or RI-RO Operation, and both contain the same
FeedRate values, the second Operation does not get a FeedRate output due to the conditional
FeedRateC command. A problem arises for MultipleParts - OneToolAllParts - ExitClearancePlane
Programs when both Operations use different Tools, and a third Operation uses the SameTool as the
second Operation, but has a different FeedRate value. The result is that when the Program moves
to machine the additional parts with the second Operation at the FeedRate value of the third
Operation. It is safer to just force the FeedRate in the second Operation.
Added FORMAT#7, '#' at Prog Numeric Format Definitions.
Added RapidF# to Format#7 at Prog Numeric Format Definitions.
RapidF# equals zero and this FORMAT allows for nothing to be output.
Added RapidF# at entryMove Procedure.
Added IF FirstOperation? OR NewTool? condition two places at entryMove Procedure.
To force FeedEnt and RapidF#.
SameTool condition outputs conditional FeedEntC.
Added IF NOT AbsoluteMoves? Boolean and SetSRXYtoEP command to zonlyRep.
This fixes problem with Incremental output of move back to StrtPos for additional passes.
Deleted UseSeparateSubCalls at ProgStart Procedure.
Deleted SetMaxSeparateSubCalls('50') at ProgStart Procedure.
Moved IF ToolChangeAtHome? Boolean and SetHome command from InitOp to FirstOp1.
Personal preference for moving Procedure call to top level at end of Prog on 5/15/98 was to
reduce it to one occurance, consistant with LongHand version where it works. However, it was
reported that the IF ToolChangeAtHome? Boolean and SetHome command occuring outside of
EachOp/NextOp loop was causing Windows version to crash. Duplicating problem required having a
part file open and a post processor loaded, and then opening a new part with one of the beta
masters. I was not able to duplicate this on the Macintosh.
Changed name of doCSG52Ops Procedure to doWFOOps.
Changed call of same two places at openMP.
Name was misleading because Procedure is also called for standard MultipleParts output, not just
G52Style and contents are identicle to M001.
9/24/98
Added Post Header Comment at top.
Added missing END command at entryMove.
Changed IncValue to incValueC at autoCycCutSub1.
Changed AbsOrInc to absOrIncC at autoCycCutSub2.
Changed AbsOrInc to absOrIncC at g92Sub.
Added support of Incremental Output for SepSubs.
When user selects Incremental Output, SepSubZMoves are incorrect.
Added doSepSubZMoves Procedure.
Contains code for ZPosMoves from zonlyRepAutoCycle and zonlyRep Procedures.
Outputs Incremental ZExitMove for Exit/Entry.
AutoCycles Retract to ZCP2.
Non-AutoCycles Retract to ZCP3.
Added setSepSubZ Procedure.
Updates Status Register to final ZInPos for FeedEntry.
Modified zonlyRepAutoCycle Procedure.
Modified zonlyRep Procedure.
Expanded Advanced Milling Flags for easier developing.
Changed Flag(7) to be dedicated to D-Style Output only.
Added Flag(8) for Toggle between D-Style and G52-Style Output.
5 possible combinations:
BStyle/G52Style Flag(6) FlagF(7) FlagF(8)
BStyle/DStyle Flag(6) FlagF(7) Flag(8)
CStyle/G52Style FlagF(6) FlagF(7) FlagF(8)
CStyle/DStyle FlagF(6) FlagF(7) Flag(8)
DStyle FlagF(6) Flag(7) Flag(8)
10/1/98
Versions: Virtual 4.29.75(Mac)/ComPost2 1.7b10 (Mac)
Versions: Virtual 4.29.75(Win)/ComPost2 1.7b10 (Win)
Corrected old problem with Incorrect Status Register XYPos at end of Pattern AutoCycle Operation.
Problem is caused because Status Register is left in SetPass1 [ Contouring ] Mode and does not compensate
for SetPass2 [ PointFeat Position ] Mode Coordinates
Correction fixes known problems with Full Incremental Output.
Correction also fixes known problems with MultipleParts EquallySpacedOffsets ShiftPC and UnshftPC commands.
Added TrackXNO# to FORMAT#4 at Prog Numeric Format Definitions.
Added TrackYNO# to FORMAT#4 at Prog Numeric Format Definitions.
Added getACEPXY Procedure.
Called from ToolPath PointFeat.
Stores uncompensated LastFeat SPX# to Var(1).
Stores uncompensated LastFeat SPY# to Var(2).
Added setSRXYtoACEP Procedure.
Called at end of OpGuts IF Milling.
Adds SetPass1 LastFeat SPXY# to uncompensated SetPass2 LastFeat SPXY#.
Added Var(1) for storage of XPosition at progStart Procedure.
Added Var(2) for storage of YPosition at progStart Procedure.
DWB}

{Prog Numeric Format Definitions ****}

#1 = '#.00'
#2 = '#####.###;0.'
#3 = '*#####.###;0.'
#4 = '#####.###;0.'
#5 = '#######0'
#6 = '####^##0'
#7 = '#'

FORMAT(FileFeet#,1)
FORMAT(FileMeters#,1)
FORMAT(CSOffsetA#,3)
FORMAT(CSOffsetB#,3)
FORMAT(ToolDiameter#,4)
FORMAT(CSOffsetX#,4)
FORMAT(CSOffsetY#,4)
FORMAT(CSOffsetZ#,4)
FORMAT(TrackXNO#,4)
FORMAT(TrackYNO#,4)
FORMAT(TrackZNO#,4)
FORMAT(ADD#,5)
FORMAT(CS#,5)
FORMAT(Program#,5)
FORMAT(CallMasterNum#,5)
FORMAT(CSSubID#,5)
FORMAT(Operation#,5)
FORMAT(Tool#,5)
FORMAT(NewWFO#,5)
FORMAT(Parts#,5)
FORMAT(Dwell#,6)
FORMAT(RapidF#,7)

{Prog Subroutines ****}

restoreScale:
IF NOT Metric? {CAM file is in English, tools and tool path}
SetScale('25.4') { change to Metric, this is a Metric post}
END
RETURN

cSPartNum#:
ADD# CS# MUL# NumOfCS# SUB# PartNum# Num#('1')
RETURN

cSWFO:
'G' ADD# cSPartNum# Num#('53')
RETURN

wFO:
'G' ADD# PartNum# Num#('53')
RETURN

wFOStuff:
IF Flag?('2') { Need to output wFOStuff twice for MP-ESO-OTAP-ECP, once for all others }
IF NOT SameTool?
IF WFOCS?
cSWFO
ELSE
wFO
END
ELSE
IF WFOCS?
IF ChangeCS?
IF MultipleParts?
{MP ChangeCS is handled in subCSMP and closeMP}
ELSE
cSWFO
END
END
END
END
END
SetFlagF('2') { Do not output WFO second time wFOStuff is called for MP-WFO-OTAP-ECP }
RETURN

cSG52:
SeqC 'G52X' CSOffsetX# 'Y' CSOffsetY# 'Z' CSOffsetZ# EOL
RETURN

g52Stuff:
IF NOT Flag?('7') AND NOT WFOCS?
IF FirstOperation? OR NewTool? OR ChangeCS?
IF MultipleParts?
IF WorkFixtureOffsets?
cSG52
END
ELSE
cSG52
END
END
END
RETURN

doCSComment:
'( CS#' CS# ' - ' CSComment$ ' )' EOL
RETURN

doCSWFOComment:
IF FirstOperation? OR NewTool? OR ChangeCS?
'( ' cSWFO ' = X' CSOffsetX# ' Y' CSOffsetY# ' Z' CSOffsetZ#
IF Flag?('6') { TRUE = B-Style Output, FALSE = C-Style Output }
IF AAxisAvail?
' A' CSOffsetA#
END
IF BAxisAvail?
' B' CSOffsetB#
END
END
' )' EOL
END
RETURN

cSComments:
doCSComment
IF WFOCS? AND NOT MultipleParts?
doCSWFOComment
END
RETURN

doSubComment:
IF UseComments? AND SubComment?
'( SUB NUMBER: ' Program# ' )' EOL
END
RETURN

doOpComments:
IF UseComments?
SetScale('1')
IF OperationIDComment?
'( OPERATION ' Operation# ': ' OperationType$ ' )' EOL
END
IF OperationComment?
'( ' OperationComment$ ' )' EOL
END
IF WorkGroupComment?
'( ' WorkGroupComment$ ' )' EOL
END
IF ToolTypeComment?
'( TOOL ' Tool# ': ' ToolDiameter# ' ' ToolType$ ' )' EOL
END
IF ToolComment?
'( ' ToolComment$ ' )' EOL
END
restoreScale
cSComments
END
RETURN

cSAngleA:
IF AAxisAvail?
IF Flag?('6') AND WFOCS? { TRUE = B-Style Output, FALSE = C-Style Output }
'A0.'
ELSE
'A' CSOffsetA#
END
END
RETURN

cSAngleAC:
IF AChange?
cSAngleA
END
RETURN

cSAngleB:
IF BAxisAvail?
IF Flag?('6') AND WFOCS? { TRUE = B-Style Output, FALSE = C-Style Output }
'B0.'
ELSE
'B' CSOffsetB#
END
END
RETURN

cSAngleBC:
IF BChange?
cSAngleB
END
RETURN

pSInit:
NewWFOF
FourthCWF
FourthCCWF
FifthCWF
FifthCCWF
RotateF
OptCyc1F
MasterOpF
CallMasterOpF
RETURN

pSStuff:
RETURN

doPostScript:
pSInit
EachPS
SeqC PostScript EOL
pSStuff
NextPS
RETURN

doEndOpPS:
pSInit
EachEOPS
SeqC EndOpPS EOL
pSStuff
NextPS
RETURN

entryMove:
IF FeedEntry?
SeqC Feed ZIn
IF FirstOperation? OR NewTool?
FeedEnt
ELSE
FeedEntC
END
EOL
ELSE
SeqC RapidC ZIn EOL
IF FirstOperation? OR NewTool?
RapidF# { Forces FeedRate }
END
END
RETURN

startSub:
OpenSub
SubID EOL
doSubComment
RETURN

subWarning:
IF NOT FeedConnect?
IF AnyZshift?
' ' EOL
'( WARNING Z CLEARANCE WILL CHANGE WITH EACH CYCLE OF SUB REPEAT )' EOL
' ' EOL
END
END
RETURN

stdSub:
SeqC SubCall CallLab RepLab RepCycs EOL
startSub
RETURN

finishSub1: {part 1}
SeqC CRCOffC
IF NOT FeedConnect?
IF AutoCycle?
ZCP3C
ELSE
IF FIFO?
FeedC ZCP3C FeedEntC
ELSE
RapidC ZCP3C
END
END
END
EOL
RETURN

finishSubG92: {part 2}
SeqC Preset ShiftRC EOL
SeqC EndSub EOL
CloseSub
SeqC Preset UnshftRC EOL
RETURN

absValueC:
IF NOT AbsValue?
AbsValue
END
RETURN

incValueC:
IF AbsValue?
IncValue
END
RETURN

absOrIncC:
IF AbsoluteMoves?
absValueC
ELSE
incValueC
END
RETURN

toggleIncDecWFO:
IF Flag?('3') { Incrementing WFOs in effect }
SetFlagF('3')
ELSE { Decrementing WFOs in effect }
SetFlag('3')
END
RETURN

doWFOOps:
IF Flag?('5')
SetFlagF('5') { Suppress Redundant WFO for MP-WFO-OTAP-ECP }
ELSE
SeqC SetWFO EOL
END
SeqC SubCall CallLab RepLab OnePart EOL
RETURN

openMP:
NewProg
IF WorkFixtureOffsets?
IF WFOCS?
startSub
SaveCSProg
SaveCSOpStart
ELSE
IF OneToolAllParts? AND ExitClearancePlane?
SetFlag('5') { Suppress Redundant WFO for MP-WFO-OTAP-ECP }
END
IF Flag?('3') { Incrementing WFOs in effect }
NewWFO
EachWFO {simple eachPart}
doWFOOps
IncWFO
NextWFO {simple NextPart}
DecWFO
ELSE { Decrementing WFOs in effect }
LastWFO
EachWFO {simple eachPart}
doWFOOps
DecWFO
NextPrevWFO {simple NextPart}
IncWFO
END
IF Flag?('4') { This post supports IncWFO/DecWFO }
toggleIncDecWFO
END
startSub
END
ELSE
SeqC SubCall CallLab RepLab Parts EOL
IF OneToolAllParts? AND ExitClearancePlane?
SetFlag('2') { Need to output wFOStuff twice for MP-ESO-OTAP-ECP, once for all others }
END
startSub
END
RETURN

doCSWFOOps:
EachCSOp
doCSWFOComment
IF Flag?('5')
SetFlagF('5') { Suppress Redundant WFO for MP-WFO-OTAP-ECP }
ELSE
SeqC cSWFO EOL
END
SeqC SubCall CallLabB CSSubID# RepLab OnePart EOL
NextCSOp
RETURN

closeMP:
IF WorkFixtureOffsets?
SeqC EndSub EOL
CloseSub
IF WFOCS?
IF OneToolAllParts? AND ExitClearancePlane?
SetFlag('5') { Suppress Redundant WFO for MP-WFO-OTAP-ECP }
END
IF Flag?('3') { Incrementing WFOs in effect }
NewWFO
EachWFO {simple eachPart}
doCSWFOOps
IncWFO
NextWFO {simple NextPart}
DecWFO
ELSE { Decrementing WFOs in effect }
LastWFO
EachWFO {simple eachPart}
doCSWFOOps
DecWFO
NextPrevWFO {simple NextPart}
IncWFO
END
IF Flag?('4') { This post supports IncWFO/DecWFO }
toggleIncDecWFO
END
END
ELSE
SeqC absOrIncC EOL
SeqC Preset ShiftPC EOL
SeqC EndSub EOL
CloseSub
SeqC Preset UnshftPC EOL
END
RETURN

subCSMP:
IF WFOCS?
IF ChangeCS?
SeqC EndSub EOL
CloseSub
NewProg
startSub
SaveCSProg
END
END
RETURN

doAbsOrInc:
IF Flag?('1') { Milling ZShiftOnly SepSubs/DrillSubs activated }
IF ZMove?
incValueC
ELSE
absOrIncC
END
END
RETURN

doDrillAbsOrInc:
IF Flag?('1') { DrillSubs activated }
IF SPZMove?
incValueC
ELSE
absOrIncC
END
END
RETURN

restoreAbsOrInc:
IF Flag?('1') { Milling ZShiftOnly SepSubs/DrillSubs activated }
SeqC absOrIncC EOL
END
RETURN

formatArc:
doAbsOrInc
IF ArcCW?
CWArcC
ELSE
CCWArcC
END
MoveXYZC
IF ArcIJFormat?
ArcIJC
ELSE
ArcRC
END
RETURN

ckCRC:
IF LastFeat?
CRCOffC
ELSE
IF NOT ZMove?
CRCOnC
END
END
RETURN

ckCRCNum:
IF NOT LastFeat? AND Equal? SPZ# EPZ#
CRCOffsetC
END
RETURN

getACEPXY:
SetACSPCompF
Save# Num#('1') SPX# { Status Register Variable for X Axis }
Save# Num#('2') SPY# { Status Register Variable for Y Axis }
SetACSPComp
RETURN

setSRXYtoACEP:
SetPass1
SetSRXYtoEP
LoadFeat Num#('0') Num#('0') Num#('0')
TrackXNO# ADD# Recall# Num#('1') SPX# { Status Register Variable for X Axis }
TrackYNO# ADD# Recall# Num#('2') SPY# { Status Register Variable for Y Axis }
RETURN

toolPath:
ResetCRCNum
EACHFeat
IF PointFeat?
IF AutoCycle?
IF LastFeat?
getACEPXY
END
SeqC MoveSXYC EOL
SeqC SubCall CallLab EOL
CalcACSRXY {calc tool position after sub call, CalcAutoCycleStatusRecordXY}
ELSE
SeqC doDrillAbsOrInc MoveSXYZC EOL
END
ELSE
IF RapidFeat?
IF XMove? OR YMove? OR ZMove?
SeqC doAbsOrInc ckCRC RapidC MoveXYZC ckCRCNum EOL
END
ELSE
IF LineFeat?
IF XMove? OR YMove? OR ZMove?
SeqC doAbsOrInc ckCRC FeedC MoveXYZC FeedRateC ckCRCNum EOL
END
ELSE
IF ArcFeat?
EACHQuadrant { Do not use NOT, FIRST, LAST or NEXT modifiers in this loop }
SeqC formatArc ArcFeedC EOL
NEXTQuadrant
END
END
END
END
NEXTFeat
restoreAbsOrInc
RETURN

autoCycCutSub1: {part 1}
SaveSubStatus {save tool position}
SetPass1 {element cut moves}
startSub
SetSRXYtoSP
SeqC incValueC EOL
RETURN

autoCycCutSub2: {part 2}
toolPath
SeqC absOrIncC CRCOffC
IF Repeats? AND FeedConnect? AND ZshiftOnly?
ELSE
IF FIFO?
FeedC ZCP2 FeedEntC
ELSE
RapidC ZCP2
END
END
EOL
SeqC EndSub EOL
CloseSub
SetSRSubXY {restore SR to 1st position value}
SetSRSubMove
RETURN

autoCycPat:
SetPass2 {position pattern}
toolPath {call after NewProg for correct sub calls}
SetPass1 {reset}
RETURN

milling:
IF AutoCycle?
NewProg
autoCycCutSub1
entryMove
autoCycCutSub2
autoCycPat
ELSE
entryMove
toolPath
END
RETURN

g92Sub:
subWarning
stdSub
SeqC absOrIncC Connect StrtPos EOL
milling
finishSub1
finishSubG92
RETURN

doSepSubZMoves:
IF FeedConnect?
SeqC FeedC ZInPlusInc FeedEnt EOL
ELSE
IF FeedEntry?
IF NOT FirstCycle?
SeqC RapidC ZCP2PlusInc EOL
END
SeqC Feed ZInPlusInc FeedEnt EOL
ELSE
IF FirstCycle? AND AutoCycle?
Rapid
END
SeqC RapidC ZInPlusInc EOL
END
END
SeqC SubCall CallLab EOL
IF NOT FeedConnect? AND NOT AbsValue?
TrackZNO# ZCP2PlusInc#
SeqC ZCP2C EOL
IF NOT AutoCycle?
TrackZNO# ClearancePlane3#
END
END
RETURN

setSepSubZ:
TrackZNO# ADD# FIRST SPZ# MUL# RepsLess1# RepeatZ#
RETURN

zonlyRepAutoCycle:
autoCycPat {write pattern moves and main calls}
startSub
NewProg
EachCycle
SetSRXYtoEP
IF NOT FirstCycle?
Connect
IF SPXMove? OR SPYMove?
SeqC incValueC StrtPosC EOL
absOrIncC
END
END
SetStatusOn
doSepSubZMoves
SetStatusOff
NextCycle
SetStatusOn
autoCycCutSub1 {build element sub}
TrackZNO# FIRST SPZ#
autoCycCutSub2
IF FeedConnect?
IF NOT AbsValue?
setSepSubZ
END
IF FIFO?
SeqC Feed ZCP2 FeedEnt EOL
ELSE
SeqC Rapid ZCP2 EOL
END
END
SeqC EndSub EOL
CloseSub
{Element shift, not pattern}
RETURN

zonlyRep:
EachCycle
SetSRXYtoEP
IF NOT FirstCycle?
Connect
IF SPXMove? OR SPYMove?
SeqC StrtPosC EOL
END
END
doSepSubZMoves
NextCycle
startSub
TrackZNO# FIRST SPZ#
toolPath
finishSub1
SeqC EndSub EOL
CloseSub
IF FeedConnect? AND NOT AbsValue?
setSepSubZ
END
RETURN

checkPass: {use the correct StrtPos}
IF AutoCycle?
SetPass2
ELSE
SetPass1
END
IF NOT Flag?('7')
ClearCSOffset
END
RETURN

skipToLastFeat:
EachFeat
IF LastFeat?
TrackXNO# SPX#
TrackYNO# SPY#
END
NextFeat
RETURN

setDrillEndOpZ:
IF RetractToCP1?
TrackZNO# ClearancePlane1#
ELSE
TrackZNO# ClearancePlane2#
END
RETURN

opGuts:
IF Milling?
SeqC ZCP2C EOL
IF Repeats?
NewProg
IF ZshiftOnly?
IF AutoCycle? {incremental Autocycle sub can have Z moves}
zonlyRepAutoCycle
ELSE {Z shift only, NOT Auto Cycle}
SetFlag('1') { Milling ZShiftOnly SepSubs activated }
zonlyRep
SetFlagF('1') { Milling ZShiftOnly SepSubs deactivated }
END {end Auto Cycle IF}
ELSE {not Z only}
g92Sub
END {end Z only IF}
ELSE {no repeat OPs}
milling
END
IF AutoCycle?
SeqC CRCOffC ZCP3C EOL
setSRXYtoACEP
ELSE
IF FIFO?
SeqC CRCOffC FeedC ZCP3C FeedEntC EOL
ELSE
SeqC CRCOffC RapidC ZCP3C EOL
END
END
ELSE
IF Drilling?
SeqC DrillCP EOL
GetCycle
SeqC Cycle FromCP StrtPos ZDepth RLevel Dwell Peck Retract FeedEnt EOL
IF CallMasterOp?
SeqC SubCall CallLabB CallMasterNum# EOL
skipToLastFeat
ELSE
TrackZNO# FIRST SPZ#
IF MasterOp?
SetFlag('1') { DrillSubs activated }
NewMasterProg
SeqC SubCall CallLab EOL
startSub
toolPath
SeqC EndSub EOL
CloseSub
SetFlagF('1') { DrillSubs deactivated }
ELSE
toolPath
END
END
setDrillEndOpZ
SeqC DrillOff Rapid ZCP3 EOL
END
END
RETURN

progStart:
InitProg
ReverseXZArcs
InitWFONum
SetFlood
SetMaxRPM('10000')
IF Metric?
SetMaxFeed('2540')
ELSE
SetMaxFeed('100')
END
Save# Num#('1') Num#('0') { Status Register Variable for X Axis }
Save# Num#('2') Num#('0') { Status Register Variable for Y Axis }
Save# Num#('3') Num#('0') { Status Register Variable for Z Axis }
SetFlagF('1') { Milling ZShiftOnly SepSubs/DrillSubs deactivated }
SetFlagF('2') { Need to output wFOStuff twice for MP-ESO-OTAP-ECP, once for all others }
SetFlag('3') { Incrementing WFOs in effect }
SetFlag('4') { This post supports IncWFO/DecWFO }
SetFlagF('5') { Suppress Redundant WFO for MP-WFO-OTAP-ECP }
SetFlagF('6') { TRUE = B-Style Output, FALSE = C-Style Output }
SetFlagF('7') { TRUE = D-Style Output }
SetFlag('8') { TRUE = D-Style Output, FALSE = Local G52-WFO Coordinates }
IF PSComment? AND UseComments?
'Utility Data:' EOL
' At Op Start: All literals and commands will appear at the beginning of the operation.' EOL
' At Op End: All literals and commands will appear at the end of the operation.' EOL
' Literals: put between single or double quotes.' EOL
' Separate commands and literals with at least one space.' EOL
' A CR ( RETURN key ) will start a new line.' EOL
' Commands: may be capital and/or lower case letters. Separate commands with a space.' EOL
END

IF NOT Flag?('7')
IF Equal? NumOfCS# Num#('1') { 3 Axis Part - Output M-Style }
SetFlag('7')
ELSE
IF MultipleParts?
IF WorkFixtureOffsets?
IF LTEqual? MUL# Parts# NumOfCS# Num#('6')
SetWFOCS { use WFO for CS changes }
ELSE
IF Flag?('8')
SetFlag('7')
END
IF UseComments?
'( Not enough Work Fixture Offsets to handle this part. )' EOL
'( Number of parts [ ' Parts# ' ] times CSs [ ' NumOfCS# ' ] )' EOL
'( exceeds the machine limit. Switching to '
IF Flag?('7')
'non'
ELSE
'G52'
END
'-wfo style output. )' EOL
END
END
ELSE
SetFlag('7')
END
ELSE
IF LTEqual? NumOfCS# Num#('6') {****}
SetWFOCS { use WFO for CS changes }
ELSE
IF Flag?('8')
SetFlag('7')
END
IF UseComments?
'( Not enough Work Fixture Offsets to handle this part. )' EOL
'( Number of CSs [ ' NumOfCS# ' ] exceeds the machine limit. )' EOL
'( Switching to '
IF Flag?('7')
'non'
ELSE
'G52'
END
'-wfo style output. )' EOL
END
END
END
END
END
RETURN

initOp:
EOR EOL
ProgID1
IF UseComments? AND ProgramNameComment?
'( PROGRAM: ' ProgramName$ ' )'
END
EOL
IF UseComments?
IF ProgramComment?
'( ' ProgramComment$ ' )' EOL
END
IF FormatNameComment?
'( FORMAT: ' FormatName$ ' )' EOL
END
IF TimeComment?
'( ' Date$ ' AT ' Time$ ' )' EOL
END
IF MovesComment?
'( OUTPUT IN ' MoveType$ ' MILLIMETERS )' EOL
END
IF PartsComment?
'( PARTS PROGRAMMED: ' Parts# ' )' EOL
END
IF StartToolComment?
'( FIRST TOOL NOT IN SPINDLE )' EOL
END
END
OpenSub
restoreScale
RETURN

firstOp1:
IF ToolChangeAtHome?
SetHome
END
Seq Plane CRCOff DrillOff EOL
SeqC OpToolID EOL
SeqC ToolChng EOL
doOpComments
doPostScript
RETURN

firstOp2:
SeqC wFOStuff EOL
g52Stuff
SeqC Speed SpinOn EOL
checkPass
SeqC AbsOrInc Rapid StrtPos cSAngleA cSAngleB EOL
RETURN

firstOp3:
SeqC OfstOn EOL
SeqC CoolOn EOL
RETURN

newToolOp1:
SeqC CoolOff EOL
SeqC incValueC OfstOff EOL
RETURN

newToolOp2:
doEndOpPS
IF ToolChangeAtHome?
SeqC absOrIncC Rapid Home SpinOff EOL
ELSE
SeqC SpinOff EOL
END
IF LAST ProgStop?
SeqC 'M0' EOL
ELSE
SeqC ProgStop EOL
END
RETURN

newToolOp3: {Start new Operation}
Seq Plane CRCOff DrillOff EOL
SeqC OpToolID EOL
SeqC ToolChng EOL
doOpComments
doPostScript
RETURN

newToolOp4:
SeqC wFOStuff EOL
g52Stuff
SeqC Speed SpinOn EOL
checkPass
SeqC AbsOrInc Rapid StrtPos cSAngleA cSAngleB EOL
RETURN

newToolOp5:
SeqC OfstOn EOL
SeqC CoolOn EOL
RETURN

sameToolOp1:
doEndOpPS
IF LAST ProgStop?
SeqC CoolOff EOL
SeqC incValueC OfstOff EOL
SeqC SpinOff EOL
SeqC 'M0' EOL
ELSE
IF CoolOff? AND LAST NOT CoolOff?
SeqC CoolOff EOL
END
IF NewToolOffset? OR AChange? OR BChange?
SeqC incValueC OfstOff EOL
END
END
RETURN

sameToolOp2: {Start new Operation}
doOpComments
doPostScript
checkPass
RETURN

sameToolOp3: {Start new Operation}
SeqC wFOStuff EOL
g52Stuff
IF LAST ProgStop?
SeqC PlaneC AbsOrInc Rapid StrtPos cSAngleA cSAngleB Speed SpinOn EOL
SeqC OfstOn EOL
SeqC CoolOn EOL
ELSE
SeqC PlaneC AbsOrInc Rapid StrtPos cSAngleA cSAngleB SpeedC EOL
IF NewToolOffset? OR AChange? OR BChange?
SeqC OfstOn EOL
END
IF NOT CoolOff? AND LAST CoolOff?
SeqC CoolOn EOL
END
END
RETURN

end1:
SeqC CoolOff EOL
SeqC incValueC OfstOff EOL
RETURN

end2:
doEndOpPS
IF FIRST ToolChangeAtHome? {added FIRST modifier}
SeqC absOrIncC Rapid FirstHome SpinOff EOL
ELSE
SeqC SpinOff EOL
END
IF Equal? CSOffsetA# Num#('0') AND Equal? CSOffsetB# Num#('0')
ELSE
SeqC absOrIncC
IF AAxisAvail?
cSAngleA
END
IF BAxisAvail?
cSAngleB
END
EOL
SeqC Preset
IF AAxisAvail?
'A0'
END
IF BAxisAvail?
'B0'
END
EOL
END
IF ProgStop?
SeqC 'M0' EOL
END
RETURN

end3:
SeqC EOP EOL
CloseSub
Post2 {organize Subs into one program}
EOR EOL
Close
IF UseComments?
SetScale('1') {restore scale for comments}
Reopen
IF FileBytesComment?
'( FILE LENGTH: ' FileBytes# ' CHARACTERS )' EOL
END
IF FileFeetComment?
'( FILE LENGTH: ' FileFeet# ' FEET )' EOL
END
IF FileMetersComment?
'( FILE LENGTH: ' FileMeters# ' METERS )' EOL
END
Close
END
RETURN

mPallTools1P: {Multiple Parts, All Tools 1 Part}
EachOp {Start of post processing}
IF EquallySpacedOffsets?
SetFlag('2') { Need to output wFOStuff twice for MP-ESO-OTAP-ECP, once for all others }
END
IF FirstOperation?
openMP
firstOp1
firstOp2
firstOp3
ELSE
IF NewTool?
newToolOp1
newToolOp2 {to tool change, CS problem}
subCSMP
newToolOp3
newToolOp4
newToolOp5
ELSE {implied SameTool?}
sameToolOp1
subCSMP
sameToolOp2
sameToolOp3
END
END {common point for all operations}
opGuts
NextOp {loops back to EachOP until last Operation}
end1 {End of program}
end2
closeMP
end3
RETURN

mP1ToollAllPfu: {Multiple Parts, 1 Tool all Parts, full up}
EachOp {Start of post processing}
IF EquallySpacedOffsets?
SetFlag('2') { Need to output wFOStuff twice for MP-ESO-OTAP-ECP, once for all others }
END
IF FirstOperation?
firstOp1
openMP
firstOp2
firstOp3
ELSE
IF NewTool?
newToolOp1
closeMP
newToolOp2 {to tool change, CS problem}
newToolOp3
openMP
newToolOp4
newToolOp5
ELSE {implied SameTool?}
sameToolOp1
subCSMP
sameToolOp2
sameToolOp3
END
END {common point for all operations}
opGuts
NextOp {loops back to EachOP until last Operation}
end1 {End of program}
closeMP
end2
end3
RETURN

mP1ToollAllPXcp: {Multiple Parts, 1 Tool all Parts, exit Clearance plane}
EachOp {Start of post processing}
SetFlag('2') { Need to output wFOStuff twice for MP-ESO-OTAP-ECP, once for all others }
IF FirstOperation?
firstOp1
firstOp2
firstOp3
openMP
firstOp2 {need StrtPos in Sub}
ELSE
IF NewTool?
closeMP
newToolOp1
newToolOp2 {to tool change, CS problem}
newToolOp3
newToolOp4
newToolOp5
openMP
newToolOp4 {need StrtPos in Sub}
ELSE {implied SameTool?}
sameToolOp1
subCSMP
sameToolOp2
sameToolOp3
END
END {common point for all operations}
opGuts
NextOp {loops back to EachOP until last Operation}
closeMP
end1
end2
end3
RETURN

noMPs: {no multiple parts}
EachOp {Start of post processing}
SetFlag('2') { Need to output wFOStuff twice for MP-ESO-OTAP-ECP, once for all others }
IF FirstOperation?
firstOp1
firstOp2
firstOp3
ELSE
IF NewTool?
newToolOp1
newToolOp2
newToolOp3
newToolOp4
newToolOp5
ELSE {implied SameTool?}
sameToolOp1
sameToolOp2
sameToolOp3
END
END {common point for all operations}
opGuts
NextOp {loops back to EachOP until last Operation}
end1 {End of program}
end2
end3
RETURN

{Start of executable Prog, Top Level ****}

progStart {setup and initializations}
initOp

IF MultipleParts?
IF AllToolsOnePart?
mPallTools1P
ELSE {implied OneToolAllParts?}
IF FullUp?
mP1ToollAllPfu
ELSE {implied ExitClearancePlane?}
mP1ToollAllPXcp
END
END
ELSE
noMPs
END