C5HG09F1 - 607

REMOVAL - REFITTING HEATER MATRIX


1 -
SPECIAL TOOLS



[1] hose clamp (-).1512
.

2 -
REMOVAL



Disconnect the battery
.


REMOVE THE FASCIA
.


Depressurise the cooling system
.


Clamp the matrix inlet and outlet hoses (1), Using the tool [1]
.


Disconnect the hoses
.


Remove the fastener (2)
.

3 -
REFITTING


IMPERATIVE :
fit new O-rings to the matrix inlet and outlet pipes
.


Disconnect the connector from the mixer reducer motor
.


Remove the three fittings (3) from the reducer motor and remove it
.

IMPERATIVE :
place a receptacle under the connectors (4) of the heater matrix (5)
.


Remove the fitting (6) to release the connectors (4) from the heater matrix (5)
.


Release the harness (7)
.


Push the connectors (4) to the bulkhead and retrieve the o rings
.


Remove the two fittings (8) of the heater matrix (5)
.


Release the three clips (9) retaining the heater matrix (5)
.


Remove the heater matrix
.


Reconnect the heater matrix pipes before repositioning it completely in its housing
.


Proceed in the reverse order to removal
.

NOTE :
top up and bleed the cooling system
.