B3FG1TK1 - 607

REMOVAL - REFITTING HANDBRAKE SECONDARY CABLES


1 -
REMOVAL



Remove the rear wheels
.


Completely unscrew the nut (1) while keeping the bolt (2) immobile
.


Uncouple the left secondary handbrake cable at (A)
.


Remove : Spring clip (3)
.


Unclip the cable at (B)
.


Pull on the cable cover (4) according to (C) in order for the cable to appear
.


Remove the closer using flat nosed pliers
.


Position the hole according to the vertical axis (D)
.


Slowly turn the disc to the rear (approximately 25 °) until it is possible to find the end of the secondary cable (shake the cable if necessary)
.


Push the cable in accordance with (E)
.


Push the end (6) of the cable against the locking spring (7) (according to F), using a thin screwdriver
.


Pull the cable in the reverse direction from (E) to extract it
.


Remove the cable
.

2 -
REFITTING



Push the end (6) of the cable into its housing until it locks in the separating mechanism (8) of the brake shoes
.


Check that the end (6) of the cable is in the correct position
.


Continue the fitting operations in the reverse order to removal
.

3 -
CABLE FREE PLAY


3 - 1 -
IN THE EVENT OF ONLY SECONDARY CABLES BEING REPLACED



Screw the nut (1) to obtain play of X = 4 mm (pull the cables according to F to measure the play X)
.


Pull the handbrake lever 10 times over the whole of its travel
.

IMPERATIVE :
ADJUST THE HANDBRAKE
.

3 - 2 -
IF THE SECONDARY CABLES AND THE PRIMARY CABLE ARE REPLACED



SQUEEZE THE CABLES TOGETHER
.