* -*- mode: outline; -*- Time-stamp: "BUG: Fri Feb 6 21:58:29 2004"

* List of known bugs as of this release:

If you find others please let us know ([e-mail])

** 050 USB boot detection (Win98).

When a USB device is first registered (ie, plugged in),
DSO may fail to find/open it. Click DSO off and on again
and the USB device should be found. Reported for Win98
but may exist in NT/XP.

** 061 MIXED mode waveform truncated.

In MIXED mode the analog waveform may be bad for the
first 3 samples (at the leftmost edge of the display).

** 072 Capture buffer wrap.

The DSO can choose the wrong trace mode for a given time
base setting. Affects BS2 scopes only. When it gets it
wrong it chooses a mode that is one step too fast. As a
result it captures at higher resolution than there is
buffer available to store. The consequence is scrolling
to about 70% of the buffer shows wrapped data.

** 016 A/D pipeline delay not compensated.

A (3 sample) pipeline delay in ADC-02 is not compensated
for yet. The analog trace in MIXED mode displays will be
shown 3 samples delayed for BitScopes using this A/D.

------------------------------------------------------------

* List of proposed new features (for a future release):

If you have other requests let us know ([e-mail]).

** 148 Captured data export

A CSV formatted export allowing an export file to be
specified to which each captured data frame is exported
(up to a user specified limit). The file can then be used
to import into data analysis and spreadsheet apps.

** 149 Screen dump/export

Export the display (including all enabled on-screen info)
to an image file for use by other applications and reports.

** 150 Accelerator keys

User definable "hot keys" for most DSO control features.

** 147 Pre-trigger data display

At present the DSO application is a "post trigger" app.
We will support BitScope's ability to view an arbitrary
amount of data pre-trigger as well.

------------------------------------------------------------