26cm COLOUR TFT-LCD MODULE
(10.4 TYPE)
LIQUID CRYSTAL DISPLAY DIVISION
LTM10C306L
PRODUCT INFORMATION
(p-Si TFT)
FEATURES
(1) 10.4 XGA display size for notebook PC
(2) LVDS interface system TENTATIVE
(3) Slim(5.5mmMAX) & light weight(265gTYP) design
MECHANICAL SPECIFICATIONS
Item Specifications
Dimensional Outline (Typ.) 241.5(W) x 171.9(H) x 5.5max(D) mm
Number of Pixels 1024(W) x 768(H) pixels
Active Area 210.432(W) x 157.824(H) mm
Pixel Pitch 0.2055(W) x 0.2055(H)
Weight (approximately) 265g
Backlight Single CCFL, Sidelight type
ABSOLUTE MAXIMUM RATINGS
Item Min. Max. Unit
Supply Voltage (VDD)-0.3 4.5 V
(VFL) 0 2.0 kV(rms)
FL Driving Frequency (fFL) - 100 kHz
Input Signal Voltage (VIN)-0.3 VDD+0.3 V
Operating Temperature 0 50 °C
Storage Temperature -20 60 °C
Storage Humidity 10 90 %(RH)
ELECTRICAL SPECIFICATION
Item Min. Typ. Max. Unit Remarks
Supply Voltage (VDD) 3.0 3.3 3.6 V
(VFL) 600 650 700 V(rms) IFL=2.5 mA(rms)
FL Start Voltage (Ta=0°C) 1200 --- 1600 V(rms)
Receiver Input Voltage 0 --- 2.4 V
Differential Input High Threshold(VTH)*1 --- --- VOS+0.1 V VOS:Offset Mode Voltage
Differential Input Low Threshold(VTL)*1 VOS-0.1 --- --- V VOS=1.2V
Current Consumption *2 (IDD) --- 360 --- mA
*3 (IFL) 2.0 2.5 5.0 mA(rms)
*2 *3 Power Consumption --- 2.8 --- W @70cd/m2
*1 : Refer to DF90CF364 Specification by National Semiconductor Corporation. This LCD module conforms to LVDS
standard (TIA/EIA-644)
*2 : 8 color bars pattern
*3 : Excepting the efficiency FL inverter
*4 : not use Hsync nor Vsync. Only ENAB control.
OPTICAL SPECIFICATION (Ta=25°C)
Item Min. Typ. Max. Unit Remarks
Contrast Ratio (CR) 100 250 --- ---
Response Time (tON) --- --- 50 ms
(tOFF) --- --- 50 ms
Luminance (L) 50 70 --- cd/m2 IFL=2.5mA(rms)
--- 200 --- cd/m2 IFL=5mA(rms)
*The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
Toshiba or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any
patent or patent rights of Toshiba or others.
*The information contained herein may be changed without prior notice. It is therefore advisable to contact Toshiba before
proceeding with the design of equipment incorporating this product.
(1/10) 1999-10-14 (Ver.3.2)
LTM10C306L
DIMENSIONAL OUTLINE (front figure)
Unit : mm
Standard tolerance : Ä…0.5
3.5 3.5
3.5 3.9
153.4
145.4
13.0 10.0
10.0
4.0
3.5
3.5
161.2(BEZEL OPENING)
3.0 4.6
157.824(ACTIVE AREA)
2.7Ä…0.3
1.312
3.0
21.7
33.5
77.6 10.0
137.9
152.9Ä…0.3
155.9
7.3 3.0
161.9
3.0 3.0
171.9
3.5
3.0 3.5
24.5 9.5
(2/10) 1999-10-14 (Ver.3.2)
1.3 Ä…0.3
(4.1max)
(5.5max)
1.7Ä…0.3
Pin No.2 Low
CN2
Pin No.1 High
FÿRÿOÿNÿTÿ
BÿAÿCÿKÿ
$ÿEÿTÿAÿIÿLÿ
"ÿ
50Ä…10
B
D
$ÿ
BÿAÿCÿKÿ
3.2Ä…0.3
$ÿEÿTÿAÿIÿLÿ
FÿRÿOÿNÿTÿ
237.4
232.0
235.4
241.5
234.8Ä…0.3
234.8Ä…0.3
120.7
213.8(BEZEL OPENING)
210.432(ACTIVE AREA)
)ÿÿ&ÿ
#ÿOÿNÿNÿEÿCÿTÿOÿRÿ
(MOLEX 55176-1491)
15.484
5.7
6.9
A
CN1
C
4.1
2.6
3.9
2.6
4.1
No.1
FÿRÿOÿNÿTÿ
5.4 MAX
ÿConnector Only ÿ
BÿAÿCÿKÿ
BÿAÿCÿKÿ
FÿRÿOÿNÿTÿ
$ÿEÿ Tÿ AÿIÿLÿ
#ÿ
$ÿEÿTÿAÿIÿLÿ
!ÿ
LTM10C306L
BLOCK DIAGRAM
I/F PCB
LVDS
Panel Liquid Crystal Panel
CN1
Controller
DC/DC 1024 x 768 pixels
Converter
X-driver
Gray scale
Manipulation
Voltage
Generation
Circuit
D/A
Converter FPC
Circuit
CN2
Backlight
1024 pixels
1, 1 2, 1 X2n-1, 1 X2n, 1 1024, 1
1, 2
1, Y X2n-1, Y X2n, Y
768 pixels
1, 768 1024,768
(3/10) 1999-10-14 (Ver.3.2)
Connector
Y-driver
Tÿ
(1)Vertical Timing ÿ
Tÿ
ÿ
.ÿ#ÿ,ÿ+ÿ
Tÿ
ÿ
%ÿ.ÿ!ÿ"ÿ
X,2 X,4
2ÿÿ^ÿ2ÿÿ
'ÿÿ^ÿ'ÿÿ
"ÿÿ^ÿ"ÿÿ
X,1 X,3 X,Y X,767 X,768
Tÿ
ÿ
(2)Horizontal Timing
Tÿ
ÿ
Tÿ
ÿ
.ÿ#ÿ,ÿ+ÿ
%ÿ.ÿ!ÿ"ÿ
1021,Y 1023,Y
2ÿÿ^ÿ2ÿÿ
'ÿÿ^ÿ'ÿÿ 1,Y 2,Y 3,Y 4,Y 5,Y 6,Y 7,Y
"ÿÿ^ÿ"ÿÿ
1022,Y 1024,Y
X,Y
Tÿ
ÿ
TCIH TCIL
4ÿÿ#ÿ,ÿ+ÿ )ÿ.ÿ
V IH(MIN):2.2(V)
ÿ.ÿ#ÿ,ÿ+ÿ ÿ
V IL(MAX):0.8(V)
4ÿÿ#ÿ,ÿ+ÿ )ÿ.ÿ
TSTC THTC
%ÿ.ÿ!ÿ"ÿ
4ÿÿ )ÿ.ÿ ÿ^ÿÿÿ
VALID
2ÿÿ^ÿ2ÿÿ V IH(MIN):2.2(V)
'ÿÿ^ÿ'ÿÿ V IL(MAX):0.8(V)
DATA
4ÿÿ )ÿ.ÿ ÿ^ÿÿÿ
"ÿÿ^ÿ"ÿÿ
TIMING CHART
(4/10) 1999-10-14 (Ver.3.2)
LTM10C306L
LTM10C306L
TIMING SPECIFICATION 1)2)3)4)5)6)
Item Symbol Min. Typ. Max. Unit Remarks
Frame Period t1 -
778 × t3 806 × t3 860 × t3
ms
- 16.67 17.25
Vertical t2
768 × t3 768 × t3 768 × t3
Display Term -
One Line Scanning t3
1319 × t5 1344 × t5 1462 × t5 -
Time
20.04 20.68 - µs
Horizontal t4
1024 × t5 1024 × t5 1024 × t5
Display Term -
Clock Period t5 15.0 15.38 - ns
Note 1) Refer to  TIMING CHART and LVDS (DF90CF364MTD) specifications by National Semiconductor.
Note 2) If ENAB is fixed to "H" or "L" level for certain period while NCLK is supplied, the panel displays black with some
flicker.
Note 3) If NCLK is fixed to "H" or "L" level for certain period while ENAB is supplied, the panel may be damaged.
Note 4) Please adjust LCD operating signal timing and FL driving frequency, to optimize the display quality.
There is a possibility that flicker is observed by the interference of LCD operating signal timing and FL driving
Condition (especially driving frequency ), even if the condition satisfies above timing specifications and
recommended operating conditions shown in 3.
Note 5) Do not make t1,t2 and t3 fluctuate.
If t1,t2 and t3 are fluctuate, the panel displays black.
SEQUENCE OF POWER SUPPLIES AND SIGNALS
500ms(min.)
10ms(max.) 10ms(max.)
3.0V
3.0V
40ms(max.) 40ms(max.)
V DD
0.2V
0.2V
0.2V
0ms(min.)
0ms(min.)
NCLK
ENAB
0.2 V
0.2 V
DD
DD
DATA
(5/10) 1999-10-14 (Ver.3.2)
 LTM10C306L
CONNECTOR PIN ASSIGNMENT FOR INTERFACE
CN1 INPUT SIGNAL
Connector :55176-1491 / MOLEX JAPAN CO., LTD.
Mating Connector : 51146-1400(housing) / MOLEX JAPAN CO., LTD.
Terminal No. Symbol Function
1 VDD Power Supply : +3.3V
2 VDD Power Supply : +3.3V
3GND
4GND
5 CK+ Sampling Clock (Positive : + )
6 CK- Sampling Clock (Negative : - )
7 IN2+ Transmission Data of Pixels 2 (Positive : + )
8 IN2- Transmission Data of Pixels 2 (Negative : - )
9 IN1+ Transmission Data of Pixels 1 (Positive : + )
10 IN1- Transmission Data of Pixels 1 (Negative : - )
11 IN0+ Transmission Data of Pixels 0 (Positive : + )
12 IN0- Transmission Data of Pixels 0 (Negative : - )
13 GND
14 GND
CN2 CCFL POWER SOURCE
Connector : HV-2S-C1C3 / JAPAN AVIATION ELECTRONICS INDUSTRY, LTD.
Mating Connector : HV-2P-HF / JAPAN AVIATION ELECTRONICS INDUSTRY, LTD.
Terminal No. Symbol Function
1 VFLH CCFL Power Supply ( high voltage)
2 VFLL CCFL Power Supply (low voltage)
(6/10) 1999-10-14 (Ver.3.2)
LTM10C306L
RECOMMENDED TRANSMITTER (DS90CF363) TO LTM10C306L INTERFACE ASSIGNMENT
Case1: 6bit Transmitter
DS90CF363 LTM10C306L
Interface
Input Terminal No. Input Signal Output
(Graphics controller output signal) Signal (CN1)
Symbol DS90CF363 Symbol Function Symbol Terminal Symbol
TIN0 44 R0 Red Pixels Display Data (LSB)
TIN1 45 R1 Red Pixels Display Data
TOUT0- No.12 IN0-
TIN2 47 R2 Red Pixels Display Data
TOUT0+ No.11 IN0+
TIN3 48 R3 Red Pixels Display Data
TIN4 1 R4 Red Pixels Display Data
TIN5 3 R5 Red Pixels Display Data (MSB)
TIN6 4 G0 Green Pixels Display Data (LSB)
TIN7 6 G1 Green Pixels Display Data
TIN8 7 G2 Green Pixels Display Data
TOUT1- No.10 IN1-
TIN9 9 G3 Green Pixels Display Data
TOUT1+ No.9 IN1+
TIN10 10 G4 Green Pixels Display Data
TIN11 12 G5 Green Pixels Display Data (MSB)
TIN12 13 B0 Blue Pixels Display Data (LSB)
TIN13 15 B1 Blue Pixels Display Data
TIN14 16 B2 Blue Pixels Display Data
TIN15 18 B3 Blue Pixels Display Data
TOUT2- No.8 IN2-
TIN16 19 B4 Blue Pixels Display Data
TOUT2+ No.7 IN2+
TIN17 20 B5 Blue Pixels Display Data (MSB)
TIN18 22 NC Non Connection (open)
TIN19 23 NC Non Connection (open)
TIN20 25 ENAB Compound Synchronization Signal
CLK IN 26 NCLK Data Sampling Clock TCLK OUT- No.6 CLK IN-
TCLK OUT+ No.5 CLK IN+
TIN6 TIN5 TIN4 TIN3 TIN2 TIN1 TIN0
IN 0
G0 R5 R4 R3 R2 R1 R0
TIN13 TIN12 TIN11 TIN10 TIN9 TIN8 TIN7
IN1
B1 B0 G5 G4 G3 G2 G1
TIN20 TIN19 TIN18 TIN17 TIN16 TIN15 TIN14
IN2
B4
ENAB NC NC B5 B3 B2
(7/10) 1999-10-14 (Ver.3.2)
 LTM10C306L
RECOMMENDED TRANSMITTER (DS90CF383) TO LTM10C306L INTERFACE ASSIGNMENT
Case2: 8bit Transmitter
DS90CF383 LTM10C306L
Input Terminal No. Input Signal Output Interface
(Graphics controller output signal) Signal (CN1)
Symbol DS90CF383 Symbol Function Symbol Terminal Symbol
TIN0 51 R0 Red Pixels Display Data (LSB)
TIN1 52 R1 Red Pixels Display Data
TOUT0- No.12 IN0-
TIN2 54 R2 Red Pixels Display Data
TOUT0+ No.11 IN0+
TIN3 55 R3 Red Pixels Display Data
TIN4 56 R4 Red Pixels Display Data
TIN6 3 R5 Red Pixels Display Data (MSB)
TIN7 4 G0 Green Pixels Display Data(LSB)
TIN8 6 G1 Green Pixels Display Data
TIN9 7 G2 Green Pixels Display Data
TOUT1- No.10 IN1-
TIN12 11 G3 Green Pixels Display Data
TOUT1+ No.9 IN1+
TIN13 12 G4 Green Pixels Display Data
TIN14 14 G5 Green Pixels Display Data(MSB)
TIN15 15 B0 Blue Pixels Display Data (LSB)
TIN18 19 B1 Blue Pixels Display Data
TIN19 20 B2 Blue Pixels Display Data
TIN20 22 B3 Blue Pixels Display Data
TOUT2- No.8 IN2-
TIN21 23 B4 Blue Pixels Display Data
TOUT2+ No.7 IN2+
TIN22 24 B5 Blue Pixels Display Data (MSB)
TIN24 27 NC Non Connection (open)
TIN25 28 NC Non Connection (open)
TIN26 30 ENAB Compound Synchronization Signal
TIN27 50 NC Non Connection (open)
TIN5 2 NC Non Connection (open)
TOUT3-
TIN10 8 NC Non Connection (open)
TOUT3+
TIN11 10 NC Non Connection (open)
TIN16 16 NC Non Connection (open)
TIN17 18 NC Non Connection (open)
TIN23 25 NC Non Connection (open)
CLK IN 31 NCLK Data Sampling Clock TCLK OUT- No.6 CLK IN-
TCLK OUT+ No.5 CLK IN+
TIN7 TIN6 TIN4 TIN3 TIN2 TIN1 TIN0
IN 0
G0 R5 R4 R3 R2 R1 R0
TIN18 TIN15 TIN14 TIN13 TIN12 TIN9 TIN8
IN1
B1 B0 G5 G4 G3 G2 G1
TIN26 TIN25 TIN24 TIN22 TIN21 TIN20 TIN19
IN2
B4
ENAB NC NC B5 B3 B2
TIN23 TIN17 TIN16 TIN11 TIN10 TIN5 TIN27
IN3
NC NC NC NC NC
NC NC
(8/10) 1999-10-14 (Ver.3.2)
 LTM10C306L
256k (k=1024) COLORS COMBINATION TABLE
Gray Scale
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
Display Level
L L L L L L L L L L L L L L L L L L -
Black
L L L L L L L L L L L L H H H H H H -
Blue
L L L L L L H H H H H H L L L L L L -
Green
Basic
L L L L L L H H H H H H H H H H H H -
Light Blue
Color
H H H H H H L L L L L L L L L L L L -
Red
H H H H H H L L L L L L H H H H H H -
Purple
H H H H H H H H H H H H L L L L L L -
Yellow
H H H H H H H H H H H H H H H H H H -
White
L L L L L L L L L L L L L L L L L L L 0
Black
L L L L L H L L L L L L L L L L L L L 1
Gray Dark L L L L H L L L L L L L L L L L L L L 2
Scale of
Ä™! : : :
L3&
Red
: : :
“! L60
Light
H H H H L H L L L L L L L L L L L L L61
H H H H H L L L L L L L L L L L L L L62
H H H H H H L L L L L L L L L L L L Red L63
Red
L L L L L L L L L L L L L L L L L L L 0
Black
L L L L L L L L L L L H L L L L L L L 1
Gray Dark L L L L L L L L L L H L L L L L L L L 2
Scale of
: : :
Ä™!
L3&
Green
: : :
“! L60
Light
L L L L L L H H H H L H L L L L L L L61
L L L L L L H H H H H L L L L L L L L62
L L L L L L H H H H H H L L L L L L Green L63
Green
L L L L L L L L L L L L L L L L L L L 0
Black
L L L L L L L L L L L L L L L L L H L 1
Gray
Dark L L L L L L L L L L L L L L L L H L L 2
Scale of
: : :
Ä™!
L3&
Blue : : :
“! L60
Light
L L L L L L L L L L L L H H H H L H L61
L L L L L L L L L L L L H H H H H L L62
L L L L L L L L L L L L H H H H H H Blue L63
Blue
L L L L L L L L L L L L L L L L L L L 0
Black
L L L L L H L L L L L H L L L L L H L 1
Gray
Scale of Dark L L L L H L L L L L H L L L L L H L L 2
White &
Ä™! : : :
L3&
Black : : :
“! L60
Light
H H H H L H H H H H L H H H H H L H L61
H H H H H L H H H H H L H H H H H L L62
H H H H H H H H H H H H H H H H H H White L63
White
(9/10) 1999-10-14 (Ver.3.2)
LTM10C306L
!
FOR SAFETY
LCD module is generally designed with precise parts to achieve light weighted thin mechanical dimensions.
In using our Modules, make certain that you fully understand and put into practice the warnings and safety precautions
detailed in Engineering Information No.EE-N001,"CAUTIONS AND INSTRUCTIONS FOR TOSHIBA LCD MODULES".
Refer to individual specifications and TECHNICAL DATA sheets (hereinafter called "TD") for more detailed technical
information.
1) SPECIAL PURPOSES
A) Toshiba's Standard LCD Modules have not been customized for operation in extreme environments or for use in
applications where performance failures could be life-threatening or otherwise catastrophic.
B) Since Toshiba's Standard LCD Modules have not been designed for operation in extreme environments, they must never
be used in devices that will be exposed to abnormally high levels of vibration or shock which exceed Toshiba's published
specification limits.
C) In addition, since Toshiba Standard LCD Modules have not been designed for use in applications where performance
failures could be life-threatening or catastrophic, they must never be installed in aircraft navigation control systems (such as,
but not limited to Traffic Collision Avoidance System and Air Traffic Indicator), in military defense or weapons systems, in
critical industrial process-control systems (e.g., those involved in the production of nuclear energy), or in critical medical
device or patient life-support systems.
2) DISASSEMBLING OR MODIFICATION
DO NOT DISASSEMBLE OR MODIFY the module. It may damage sensitive parts inside LCD module, and may cause
scratches or dust on the display.
Toshiba doses not warrant the module, if customer disassembled or modified it.
3) BREAKAGE OF LCD PANEL
DO NOT INGEST liquid crystal material, DO NOT INHALE this material, and DO NOT CONTACT the material with skin, if
LCD panel is broken and liquid crystal material spills out.
If liquid crystal material comes into mouth or eyes, rinse mouth or eyes out with water immediately.
If this material contact with skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water.
4) GLASS OF LCD PANEL
BE CAREFUL WITH CHIPS OF GLASS that may cause injuring fingers or skin, when the glass is broken.
5) ELECTRIC SHOCK
DISCONNECT POWER SUPPLY before handling LCD module.
DO NOT TOUCH the parts inside LCD module and the fluorescent lamp's connector or cables in order to prevent electric
shock, because high voltage is supplied to these parts from the inverter unit while power supply is turned on.
6) ABSOLUTE MAXIMUM RATINGS AND POWER PROTECTION CIRCUIT
DO NOT EXCEED the absolute maximum rating values under the worst probable conditions caused by the supply voltage
variation, input voltage variation, variation in parts' constants, environmental temperature, etc., otherwise LCD module may
be damaged.
Employ protection circuit for power supply, whenever the specification or TD specifies it.
Suitable protection circuit should be applied for each system design.
7) DISPOSAL
When dispose LCD module, obey to the applicable environmental regulations.
(10/10) 1999-10-14 (Ver.3.2)