CEDAR SUET FEEDER 1/2" EYE SCREWS 5 3/4" 1 1/4"W x 4 1/2"L x 1 1/2"H ROOF SUPPORT 1 1/2" 3" 5 1/2" CEDAR CLAD BOARD FOR ROOF 10 3/8" 6 3/4" OVERALL FENCE SCREEN HEIGHT 1 3/8"W x 4 3/4"L x 2 1/2"H BOTTOM SUPPORT BASE 3/4" 1/8" 4 3/4" 3 3/8" NOTES 1. Materials: 3/4" Cedar Tongue and Grove, 5 1/2" Cedar Clad Board, 1/4" Fencing, 2 ea 1/2" Eye Screws, 1 1/4" Dry Wall Screws, 1/4" Nylon Rope (20"). All Materials available at a good Home Improvement Store. 2. Use Waterproof glue for assembly. 3. Bottom and Roof Supports were made by gluing the Tongue and Groove together to get the proper width. 4. Roof "Shingles' were cut from 5 1/2" Cedar Clad Board starting at the 1/2" thick bottom end for the 3" Shingle then measure up for the 1 1/2" one. 5. Base was glued and screwed to Bottom Support 6. Fence Screen overlaps Base Support 1" and is stapled in place 7. Roof shingles : Bottom were glued and screwed to Roof Support, Top were just glued 8. You can cut evenly spaced groves on the face of the Bottom Support to give some "purchase" for the Woodpecker's Tails 9. Roof is screwed onto Fence Screen from both sides 10. This was designed to fit the standard 11oz 4 1/4"x 4 1/4"x 1 1/2' Suet Cake DJM 9/98 (http://www.geocities.com/Heartland/Pointe/2039) 1 of 2 CEDAR SUET FEEDER DJM 9/98 (http://www.geocities.com/Heartland/Pointe/2039) 2 of 2