{Change Comments ***********************************************************}

{10/11/95
Initial: Dynapath 20M [V] M074.85
Created: Dynapath 40M Mxxx.85
ForUser: Gibbs & Associates
Control: Dynapath 40M
Machine: ???? Generic Processor
Develop: ComPost 4.21.33, Catalyst v2.26C
Comment: Modifications made per Dennis Ridolfi at Autocon Technologies
Added O plane to drilling to support RetractToCP1.
Changed ToolOfst label to H. Added Default format for H.
Added CRCOffsetC label D. Added Default format for D.
Added OpToolID ToolChng lines.
Added CRCOffsetC to ToolOfst lines.
Jim Radcliffe}

{11/2/95
Modified: Dynapath 40M M870.85
For: Gibbs & Associates
Versions: ncCad 4.33.01/ncCAM 4.33.01/ncPost 4.33.08/Catalyst v2.28.04/Compost 4.21.33/1.0a
Various necessary minor changes, too numerous to list due to time constraints.
DWB}

{1/17/96, Updated .85 to .86 version, MPK}

{3/22/96, Tested ZOnlyRepAutoCycle, Changed version # to .89, MPK}

{7/10/96
Initial: Dynapath 40M M870.89
Created: Dynapath 40M Mxxx.89
Changed tool offset format to Taabb: aa=tool# bb=offset# (offset# handles both length and radius) modified pecking to
output a q value for Full Out, added rigid tapping, MPK}

{28Jul97
Original: Dynapath 40M [CP] M141.89
Created: Dynapath 40M [DM] Mxxx.89
For: Diversified Machine
Changes made per: Mark Tauschek
Deleted Rapid Speed WFOStuff in FirstOperation and NewTool
Deleted OpToolID ToolOffset# ToolChng in FirstOperation and NewTool
Added ToolChng WFOStuff OpToolID in FirstOperation and NewTool
Added Rapid SpinOn Speed WFOStuff ToolOffset# in FirstOperation and NewTool
Charles Winston}

{12/1/97,
Initial: Dynapath 40M [DM] MX61.89
Created: Dynapath 40M [DM] MX61.89.1
For: Diversified Machine
Changed Rapid to '(9)' at ToolChanges in FirstOp and NewTool.
and added '$' at end of the line.
CDH}

{Prog Numeric Format Definitions *******************************************}

#1 = '#.00'
#2 = '###.###;0.'
#3 = '*###.###;0.'
#4 = '####.####;0.'
#5 = '#######0'
#6 = '###.#;0'
#7 = '00'

FORMAT(FileFeet#,1)
FORMAT(FileMeters#,1)
FORMAT(SPX#,4)
FORMAT(SPY#,4)
FORMAT(DIV#,4)
FORMAT(Retract#,4)
FORMAT(ClearancePlane1#,4)
FORMAT(ToolDiameter#,4) {.72}
FORMAT(Recall#,5)
FORMAT(Tag#,5)
FORMAT(CallMasterNum#,5)
FORMAT(Program#,5) {.72}
FORMAT(Operation#,5) {.72}
FORMAT(Tool#,5) {.72}
FORMAT(Parts#,5) {.72}
FORMAT(RapidF#,6)
FORMAT(Dwell#,6) {.72}
FORMAT(NewWFO#,7) {.72}
FORMAT(ToolOffset#,7)

{Prog Subroutines **********************************************************}

RestoreScale:
IF Metric? {CAM file is in Metric, tools and tool path}
SetScale('.03937007874') { change to English, this is an English post}
END
RETURN

Get$: { For conversational output }
IF NOT EmptyLine?
'$'
END
RETURN

TurnCRCOn:
IF CutterRadiusCompensation? AND NOT Flag?('2')
IF NOT LastFeat? AND NOT ZMove?
SetFlag('2')
SetFlag('3') { CRCOff }
SeqLab FeedC EOL
SeqLab CRCOff MoveSX MoveSY EOL
END
END
RETURN

TurnCRCOff:
IF CutterRadiusCompensation? AND Flag?('2')
SetFlagF('2')
SetFlagF('3') { CRCOff }
SeqLab FeedC EOL
SeqLab IncValue EOL
SeqLab CRCOff MoveXY EOL
IF NOT AutoCycle?
SeqLab AbsValue EOL
END
END
RETURN

DoSubComment:
IF UseComments? AND SubComment?
SeqLab '(T) SUB NUMBER ' Tag# Get$ EOL
END
RETURN

DoOpComments:
IF UseComments?
SetScale('1')
IF OperationIDComment?
SeqLab '(T) OPERATION ' Operation# ' ' OperationType$ Get$ EOL
END
IF OperationComment?
SeqLab '(T) ' OperationComment$ Get$ EOL
END
IF WorkGroupComment?
SeqLab '(T) ' WorkGroupComment$ Get$ EOL
END
IF ToolTypeComment?
SeqLab '(T) TOOL# ' Tool# ' ' ToolDiameter# ' ' ToolType$ Get$ EOL
END
IF ToolComment?
SeqLab '(T) ' ToolComment$ Get$ EOL
END
RestoreScale
END
RETURN

PSInit: {reset flags}
NewWFOF
RotateF
OptCyc1F
MasterOpF
CallMasterOpF
RETURN

PSStuff: {revised.72}
IF FourthCW?
FORMAT(FourthDegree#,2)
SeqLab '(0)' 'A' FourthDegree# Get$ EOL
FourthCWF {reset flag}
END
IF FourthCCW?
FORMAT(FourthDegree#,3)
SeqLab '(0)' 'A' FourthDegree# Get$ EOL
FourthCCWF {reset flag}
END
IF FifthCW?
FORMAT(FifthDegree#,2)
SeqLab '(0)' 'B' FifthDegree# Get$ EOL
FifthCWF {reset flag}
END
IF FifthCCW?
FORMAT(FifthDegree#,3)
SeqLab '(0)' 'B' FifthDegree# Get$ EOL
FifthCCWF {reset flag}
END
RETURN

DoPostScript:
PSInit
EachPS
SeqLab PostScript Get$ EOL {literals}
PSStuff {commands}
NextPS
RETURN

DoEndOpPS:
PSInit
EachEOPS
SeqLab EndOpPS Get$ EOL {literals}
PSStuff {commands}
NextPS
RETURN

EntryMove:
IF FeedEntry?
SeqLab Feed ZIn FeedEnt EOL
ELSE
SeqLab RapidC ZIn EOL
END
RETURN

StartSub:
OpenSub
DoSubComment
'>' Tag# EOL
RETURN

SubWarning:
IF NOT FeedConnect?
IF AnyZshift?
SeqLab '(T) ' Get$ EOL
SeqLab '(T) *** WARNING ***' Get$ EOL
SeqLab '(T) Z CLEARANCE WILL' Get$ EOL
SeqLab '(T) CHANGE WITH EACH' Get$ EOL
SeqLab '(T) CYCLE OF SUB!' Get$ EOL
SeqLab '(T) ' Get$ EOL
END
END
RETURN

StdSub:
'È' Tag# EOL
SeqLab '(7)FÅ‚' Tag# 'L²' Tag# Get$ EOL
SeqLab '(6)FÇ' Tag# 'T' RepsLess1 Get$ EOL
StartSub
RETURN

FinishSub1: {part 1}
IF NOT FeedConnect?
SeqLab
IF AutoCycle?
ZCP3C
ELSE
IF FIFO? {.81}
FeedC ZCP3C FeedEntC
ELSE
RapidC ZCP3C
END
END
EOL
END
RETURN

FinishSubG92: {part 2}
SeqLab Preset ShiftRC EOL
'<' Tag# EOL
TagDown
CloseSub
SeqLab Preset UnshftRC EOL
RETURN

OpenMP:
TagUp TagInc
IF WorkFixtureOffsets?
NewWFO
EachWFO
SeqLab SetWFO EOL
SeqLab '(7)FÅ‚' Tag# 'L²' Tag# Get$ EOL
IncWFO
NextWFO
ELSE
'È' Tag# EOL
SeqLab '(7)FÅ‚' Tag# 'L²' Tag# Get$ EOL
SeqLab '(6)FÇ' Tag# 'T' PartsLess1 Get$ EOL
END
StartSub
RETURN

CloseMP:
IF WorkFixtureOffsets?
'<' Tag# EOL
TagDown
CloseSub
SeqLab WFO1 EOL
ELSE
SeqLab Preset ShiftPC EOL
'<' Tag# EOL
TagDown
CloseSub
SeqLab Preset UnshftPC EOL
END
RETURN

DoAbsOrInc:
IF Flag?('1') { AbsoluteMoves? = TRUE }
IF ZMove? AND AbsValue?
IncValue
ELSE
IF NOT ZMove? AND NOT AbsValue?
AbsValue
END
END
END
RETURN

DoDrillAbsOrInc:
IF Flag?('1') { AbsoluteMoves? = TRUE }
IF SPZMove? AND AbsValue?
IncValue
ELSE
IF NOT SPZMove? AND NOT AbsValue?
AbsValue
END
END
END
RETURN

RestoreAbsOrInc:
IF Flag?('1') AND NOT AbsValue? { AbsoluteMoves? = TRUE }
SeqLab AbsValue EOL
END
RETURN

FormatArc:
IF ArcCW?
CWArcC
ELSE
CCWArcC
END
MoveXYZC ArcIJ
RETURN

ckCRC:
IF CutterRadiusCompensation? AND Flag?('2')
IF NOT LastFeat? AND NOT ZMove?
IF NOT Flag?('3') { CRCOff }
SetFlag('3')
FeedC EOL
SeqLab
END
CRCOnC
END
END
RETURN

FormatLine:
ckCRC FeedC MoveXYZC
RETURN

ckCRCNum:
{ Not supported }
RETURN

ToolPath:
EACHFeat
IF PointFeat?
IF AutoCycle?
SeqLab MoveSXYC EOL
SeqLab '(7)FÅ‚' Tag# 'L²' Tag# Get$ EOL
CalcACSRXY {calc tool position after sub call, CalcAutoCycleStatusRecordXY}
ELSE
SeqLab DoDrillAbsOrInc MoveSXYZC EOL {.80.01}
END
ELSE
IF RapidFeat?
IF XMove? OR YMove? OR ZMove?
TurnCRCOn
SeqLab DoAbsOrInc EOL
IF CutterRadiusCompensation? AND Flag?('2')
SeqLab FormatLine RapidFC EOL
ELSE
SeqLab ckCRC RapidC MoveXYZC EOL
END
END
ELSE
IF LineFeat?
IF XMove? OR YMove? OR ZMove?
TurnCRCOn
SeqLab DoAbsOrInc EOL
IF Decelerate?
IF RoomToDecel?
DecelMove1
SeqLab FormatLine FeedRateC EOL
DecelMove2
SeqLab DoAbsOrInc EOL
END
SeqLab FormatLine DecelFeed EOL
ELSE
SeqLab FormatLine FeedRateC EOL
END
END
ELSE
IF ArcFeat?
EACHQuadrant { Do not use NOT, FIRST, LAST or NEXT modifiers in this loop }
SeqLab DoAbsOrInc EOL
IF LastQuadrant? AND Decelerate?
IF RoomToDecel?
DecelMove1
SeqLab FormatArc ArcFeedC EOL
DecelMove2
SeqLab DoAbsOrInc EOL
END
SeqLab FormatArc DecelFeed EOL
ELSE
SeqLab FormatArc ArcFeedC EOL
END
NEXTQuadrant
END
END
END
IF LastFeat? { Exit Length Feature }
TurnCRCOff {.70}
END
END
NEXTFeat
RestoreAbsOrInc
RETURN

WFOStuff:
IF NewWFO?
IF MultipleParts?
EOL
SeqLab '(T) ' Get$ EOL
SeqLab '(T) *** WARNING ***' Get$ EOL
SeqLab '(T) DO NOT USE' Get$ EOL
SeqLab '(T) NEWWFO() WITH' Get$ EOL
SeqLab '(T) NCPOST MULTIPLE' Get$ EOL
SeqLab '(T) PARTS!' Get$ EOL
SeqLab '(T) ' Get$ EOL
ELSE
'E' NewWFO#
END
ELSE
IF NOT SameTool?
IF NeedWFO1?
'E' NewWFO#
END
END
END
RETURN

AutoCycCutSub1: {part 1}
SaveSubStatus {save tool position}
SetPass1 {element cut moves}
StartSub
SetSRXYtoSP
SeqLab IncValue EOL
RETURN

AutoCycCutSub2: {part 2}
ToolPath
SeqLab AbsValue EOL
IF Repeats? AND FeedConnect? AND ZshiftOnly?
{.69 removed RapidC} {.71.2 removed CRCOffC, gets turned off in ToolPath}
ELSE
IF FIFO? {.81}
SeqLab FeedC ZCP2 FeedEntC EOL
ELSE
SeqLab RapidC ZCP2 EOL
END
END
'<' Tag# EOL
CloseSub
SetSRSubXY {restore SR to 1st position value}
SetSRSubMove
RETURN

AutoCycPat:
SetPass2 {position pattern}
ToolPath {call after TagInc for correct sub calls}
SetPass1 {reset}
RETURN

Milling:
IF AutoCycle?
TagUp TagInc
AutoCycCutSub1
EntryMove
AutoCycCutSub2
AutoCycPat
TagDown
ELSE
EntryMove
ToolPath
END
RETURN

G92Sub:
SubWarning
StdSub
SeqLab AbsValue EOL
SeqLab Connect StrtPos EOL
Milling
FinishSub1
FinishSubG92
RETURN

ZonlyRepAutoCycle:
AutoCycPat {write pattern moves and main calls}
StartSub
TagUp TagInc
EachCycle
SetSRXYtoEP
IF FeedConnect?
IF NOT FirstCycle?
IF SPXMove? OR SPYMove?
SeqLab Feed IncValue StrtPosC EOL
SeqLab AbsOrInc
ELSE
SeqLab Feed
END
ELSE
SeqLab Feed
END
ZInPlusInc FeedEnt EOL
ELSE
IF NOT FirstCycle?
IF SPXMove? OR SPYMove?
SeqLab Rapid IncValue StrtPosC EOL
IF FeedEntry?
SeqLab AbsOrInc ZCP2PlusInc EOL
SeqLab Feed ZInPlusInc FeedEnt EOL
ELSE
SeqLab AbsOrInc ZInPlusInc EOL
END
ELSE
IF FeedEntry?
SeqLab Rapid ZCP2PlusInc EOL
SeqLab Feed ZInPlusInc FeedEnt EOL
ELSE
SeqLab Rapid ZInPlusInc EOL
END
END
ELSE
IF FeedEntry?
SeqLab Feed ZInPlusInc FeedEnt EOL
ELSE
SeqLab Rapid ZInPlusInc EOL
END
END
END
IF FirstCycle?
SetStatusOff {protect Z position for incremental sub}
END
SeqLab '(7)FÅ‚' Tag# 'L²' Tag# Get$ EOL
NextCycle
SetStatusOn
AutoCycCutSub1 {build element sub}
AutoCycCutSub2
{.69, removed FinishSub1}
IF FeedConnect? {there is no Z up in the sub, .69}
IF FIFO? {.81}
SeqLab Feed ZCP2 FeedEnt EOL {.69}
ELSE
SeqLab Rapid ZCP2 EOL {.69}
END
END {.69}
TagDown
'<' Tag# EOL
CloseSub
{Element shift, not pattern}
TagDown
RETURN

ZonlyRep:
EachCycle
IF NOT FirstCycle?
SeqLab Connect StrtPos EOL {.71.2, added Connect}
END
IF FeedConnect?
SeqLab FeedC ZInPlusInc FeedEnt EOL {.71.2, changed to FeedC}
ELSE {Entry/Exit Connect}
IF FeedEntry?
IF NOT FirstCycle?
SeqLab RapidC ZCP2PlusIncC EOL {can't call for cycle =1} {.69 added Rapid, reads better} {.71.2, changed to RapidC, reads better}
END
SeqLab Feed ZInPlusInc FeedEnt EOL
ELSE
SeqLab RapidC ZInPlusInc EOL {.69 added Rapid, reads better} {.71.2, changed to RapidC, reads better}
END
END
SeqLab '(7)FÅ‚' Tag# 'L²' Tag# Get$ EOL
NextCycle
StartSub
TrackZNO# FIRST SPZ#
ToolPath
FinishSub1
'<' Tag# EOL
TagDown
CloseSub
RETURN

CheckPass:
IF AutoCycle? {use the correct StrtPos}
SetPass2
ELSE
SetPass1
END
RETURN

SkipToLastFeat:
EachFeat
IF LastFeat?
TrackXNO# SPX#
TrackYNO# SPY#
END
NextFeat
RETURN

SetDrillEndOpZ:
IF RetractToCP1?
TrackZNO# ClearancePlane1#
ELSE
TrackZNO# ClearancePlane2#
END
RETURN

GetStartOfSameTool:
DoOpComments
DoPostScript
CheckPass
SeqLab SpeedC WFOStuff EOL
SeqLab PlaneC EOL
SeqLab AbsValue EOL
RETURN

{Start of executable Prog **************************************************}

{setup and initializations}
InitProg
TagInit
ReverseXZArcs
InitWFONum
SetFlood
UseSeparateSubCalls
SetMaxSeparateSubCalls('50')
SetMaxRPM('10000')
SetMaxFeed('500')
SetFlagF('1') { Milling ZShiftOnly SepSubs }
SetFlagF('2') { TurnCRCOff }
SetFlagF('3') { CRCOff }
SetFlagF('4') { SubPrograms require 2nd M30 at end }
IF PSComment? AND UseComments?
SeqLab '(T) PostScript:' Get$ EOL
SeqLab '(T) Literals: put between single or double quotes.' Get$ EOL
SeqLab '(T) Separate commands and literals with at least one space.' Get$ EOL
SeqLab '(T) A CR ( RETURN key ) will start a new line.' Get$ EOL
SeqLab '(T) Commands: may be capital and/or lower case letters. Separate commands with a space.' Get$ EOL
SeqLab '(T) EndOP -' Get$ EOL
SeqLab '(T) all literals and commands before an ENDOP command' Get$ EOL
SeqLab '(T) will appear at the beginning of the operation. All' Get$ EOL
SeqLab '(T) literals and commands after an ENDOP command will appear' Get$ EOL
SeqLab '(T) at the end of the operation.' Get$ EOL
SeqLab '(T) NewWFO(56), NWFO(56) -' Get$ EOL
SeqLab '(T) The Work Fixture Offset # you specify will be used for all following operations.' Get$ EOL
SeqLab '(T) Do not use with the ncPost multiple part option.' Get$ EOL
SeqLab '(T) 4thAxisCW(12.5), 4ACW(12.5) -' Get$ EOL
SeqLab '(T) generates a + A move of the value you specify' Get$ EOL
SeqLab '(T) 4thAxisCCW(22.5), 4ACCW(22.5) -' Get$ EOL
SeqLab '(T) generates a - A move of the value you specify' Get$ EOL
SeqLab '(T) 5thAxisCW(30), 5ACW(30) -' Get$ EOL
SeqLab '(T) generates a + B move of the value you specify' Get$ EOL
SeqLab '(T) 5thAxisCCW(22.5), 5ACCW(22.5) -' Get$ EOL
SeqLab '(T) generates a - B move of the value you specify' Get$ EOL
END
EachOp {Start of post processing *********************}
IF FirstOperation?
'(' Program# ')' EOL
IF ToolChangeAtHome?
SetHome
END
IF UseComments?
IF ProgramNameComment?
SeqLab '(T) PROGRAM ' ProgramName$ Get$ EOL
END
IF ProgramComment?
SeqLab '(T) ' ProgramComment$ Get$ EOL
END
IF FormatNameComment?
SeqLab '(T) FORMAT ' FormatName$ Get$ EOL
END
IF TimeComment?
SeqLab '(T) ' Date$ ' AT ' Time$ Get$ EOL
END
IF MovesComment?
SeqLab '(T) OUTPUT IN ABSOLUTE INCHES' Get$ EOL
END
IF PartsComment?
SeqLab '(T) PARTS PROGRAMMED ' Parts# Get$ EOL
END
IF StartToolComment?
SeqLab '(T) FIRST TOOL NOT IN SPINDLE' Get$ EOL
END
END
OpenSub
RestoreScale
IF MultipleParts? AND AllToolsOnePart?
OpenMP
END
DoOpComments
DoPostScript
SeqLab Plane EOL
SeqLab 'G70' EOL
SeqLab AbsValue EOL
SeqLab ToolChng WFOStuff OpToolID EOL
SeqLab '(9)' SpinOn Speed WFOStuff 'T' ToolOffset# '$' EOL
IF MultipleParts? AND OneToolAllParts? AND FullUp?
OpenMP
END
CheckPass
SeqLab StrtPos EOL
SeqLab ZCP1 EOL
SeqLab CoolOn EOL
IF MultipleParts? AND OneToolAllParts? AND ExitClearancePlane?
OpenMP
SeqLab StrtPos EOL
END
ELSE
IF NewTool?

{Finish off last Operation}

IF MultipleParts? AND OneToolAllParts? AND ExitClearancePlane?
CloseMP
END
SeqLab CoolOff EOL
IF MultipleParts? AND OneToolAllParts? AND FullUp?
CloseMP
END
DoEndOpPS
IF LAST ProgStop?
SeqLab 'M0' EOL
ELSE
IF OptionalStops?
SeqLab ProgStop EOL
END
END

{Start new Operation}

DoOpComments
DoPostScript
SeqLab Plane EOL
SeqLab 'G70' EOL
SeqLab AbsValue EOL
SeqLab ToolChng WFOStuff OpToolID EOL
SeqLab '(9)' SpinOn Speed WFOStuff 'T' ToolOffset# '$' EOL
IF MultipleParts? AND OneToolAllParts? AND FullUp?
OpenMP
END
CheckPass
SeqLab StrtPos EOL
SeqLab ZCP1 EOL
SeqLab CoolOn EOL
IF MultipleParts? AND OneToolAllParts? AND ExitClearancePlane?
OpenMP
SeqLab StrtPos EOL
END
ELSE
IF SameTool?
DoEndOpPS
IF LAST ProgStop?
SeqLab CoolOff EOL
SeqLab 'M0' EOL

{Start new Operation}

GetStartOfSameTool
SeqLab ToolOfst CRCOffsetC EOL
SeqLab SpinOn EOL
SeqLab Rapid StrtPos EOL
SeqLab ZCP1 EOL
SeqLab CoolOn EOL
ELSE
IF CoolOff? AND LAST NOT CoolOff?
SeqLab CoolOff EOL
END
IF NewToolOffset?

{Start new Operation}

GetStartOfSameTool
SeqLab OpToolID ToolOffset# EOL
SeqLab Rapid StrtPos EOL
SeqLab ZCP1 EOL
ELSE

{Start new Operation}

GetStartOfSameTool
SeqLab Rapid StrtPos EOL
END
IF NOT CoolOff? AND LAST CoolOff?
SeqLab CoolOn EOL
END
END
END
END
END {common point for all operations}
IF MultipleParts? OR Repeats? OR AutoCycle?
SetFlag('4') { SubPrograms require 2nd M30 at end }
END
IF Milling?
SeqLab ZCP2C EOL
IF Repeats?
TagUp TagInc
IF ZshiftOnly?
IF AutoCycle? {incremental Autocycle sub can have Z moves}
ZonlyRepAutoCycle
ELSE {Z shift only, NOT Auto Cycle}
IF UseSeparateSubCalls? AND CyclesLessThanMaxSubCalls?
SetFlag('1') { Milling ZShiftOnly SepSubs }
ZonlyRep
SetFlagF('1')
ELSE {no sep subs desired}
G92Sub
END
END {end Auto Cycle IF}
ELSE {not Z only}
G92Sub
END {end Z only IF}
ELSE {no repeat OPs}
Milling
END
IF AutoCycle?
SeqLab ZCP3C EOL
ELSE
IF FIFO? {.81}
SeqLab FeedC ZCP3C FeedEntC EOL
ELSE
SeqLab RapidC ZCP3C EOL
END
END
ELSE
IF Drilling?
IF Repeats?
TagUp TagInc
StdSub
SeqLab AbsValue EOL
SeqLab Rapid StrtPos EOL
END
SeqLab DrillCP EOL
GetCycle
IF RigidTap?
SeqLab 'G75' StrtPos ZDepth RLevel 'F' DIV# Num#('1') FeedTapIPR#('1') EOL
ELSE
SeqLab Cycle StrtPos ZDepth RLevel
IF RetractToCP1?
'O' ClearancePlane1#
END
Dwell Peck
IF Peck?
'Q' Retract#
END
FeedEnt EOL
END
IF CallMasterOp?
SeqLab '(7)'
'FÅ‚' CallMasterNum#
'L²' CallMasterNum# Get$ EOL
SkipToLastFeat
ELSE
TrackZNO# FIRST SPZ#
IF MasterOp?
SetFlag('1') {std sep sub Zreps in effect}
SetFlag('4') { SubPrograms require 2nd M30 at end }
TagUp
NewMasterTag
SeqLab '(7)FÅ‚' Tag# 'L²' Tag# Get$ EOL
StartSub
ToolPath
'<' Tag# EOL
TagDown
CloseSub
SetFlagF('1') {not std sep sub Zreps in effect}
ELSE
ToolPath
END
END
SetDrillEndOpZ
SeqLab Rapid 'G80' ZCP3 EOL
IF Repeats?
FinishSubG92
END
END
END
NextOp {loops back to EachOP until last Operation}

{End of program ************************************************************}

{finish last operation}
IF MultipleParts? AND OneToolAllParts? AND ExitClearancePlane?
CloseMP
END
SeqLab CoolOff EOL
IF MultipleParts? AND OneToolAllParts? AND FullUp?
CloseMP
END
DoEndOpPS
IF FIRST ToolChangeAtHome? {.71.2 added FIRST modifier}
SeqLab AbsValue EOL
SeqLab Rapid FirstHome SpinOff EOL
ELSE
SeqLab SpinOff EOL
END
IF ProgStop?
SeqLab 'M0' EOL
END
IF MultipleParts? AND AllToolsOnePart?
CloseMP
END
SeqLab EOP EOL
CloseSub
Post2 {organize Subs into one program}
IF Flag?('4') { SubPrograms exist }
SetFlagF('4')
SeqLab EOP EOL { This is required a second time, at end of all subs }
END
'END' EOL
Close
ReTag
IF UseComments?
SetScale('1') {restore scale for comments}
Reopen
IF FileBytesComment?
'N9997(T) FILE LENGTH: ' FileBytes# ' CHARACTERS' Get$ EOL
END
IF FileFeetComment?
'N9998(T) FILE LENGTH: ' FileFeet# ' FEET' Get$ EOL
END
IF FileMetersComment?
'N9999(T) FILE LENGTH: ' FileMeters# ' METERS' Get$ EOL
END
Close
END