{
MILL=T
LATHE=F
SIMPLE_ROT_POS=F
ROTARY_MILL=F
ADV_MILL=T
SUBS=F
MILLTURN_Y-AXIS=F
METRIC=F
}

{Change Comments ***********************************************************}

{11/16/98
Initial: Fanuc 6M NMU99.16
Created: Fanuc 6M Leblond NMxxx.16
ForUser: Alco Packaging Machinery
Control: Fanuc 6M
Machine: Leblond Makino
Develop: Compost2 v1.6b8, Virtual 4.29.63
Comment: New processor per marked up readout and sample program and conversation with Chuck Keen.
G100 is macro that calls G43 G54 M3 M8 among other things.
Set up wFOStuff to output by request only, MPs or NWFO.
Jim Radcliffe}

{12/3/98
Initial: Fanuc 6M LM [AP] NMT45.16
Created: Fanuc 6M LM [AP] NMT45.16.1
Develop: ComPost2 v1.7b11, Virtual v5.02
Comment: Modified pr marked up readout.
Changed program ID label from colon to letter O
Added SetAbs to G100 blocks to suppress the G90 output of absOrIncC
Jim Radcliffe}

{1/8/99
Initial: Fanuc 6M LM [AP] NMT45.16.1
Created: Fanuc 6M LM [AP] NBT45.16
Develop: Compost2 1.7b13, Virtual v5.02
Comment: Created Advanced Mill B Style version per Fanuc 6M [FW] NBU99.16
Jim Radcliffe}

{1/21/99
Initial: Fanuc 6M LM [AP] NBT45.16
Created: Fanuc 6M LM [AP] NBT45.16.1
Control: Fanuc 11M
Machine: Leblond Makino 1210 (horizontal)
Develop: Compost2 PPC 1.7b15, Virtual v5.02
Comment: Modified per fax and conversation with Chuck Keen 303-708-9044
Removed support for Optional Stops At Tool Change Positions.
Moved output of Program Stop 'M0' to after ToolChng.
Added three more G10 lines to beginning of program.
Added block delete to G10 lines.
Moved WFO, index and unconditional sequence number from to line by itself before StrtPos.
Jim Radcliffe}

{Prog Numeric Format Definitions ****}

#1 = '#.00'
#2 = '#####.###;0'
#3 = '*####0.0##;0'
#4 = '###0.0###;0'
#5 = '#######0'
#6 = '####^##0'
#7 = '#'

FORMAT(FileFeet#,1)
FORMAT(FileMeters#,1)
FORMAT(CSOffsetA#,3)
FORMAT(CSOffsetB#,3)
FORMAT(ToolDiameter#,4)
FORMAT(CSOffsetX#,4)
FORMAT(CSOffsetY#,4)
FORMAT(CSOffsetZ#,4)
FORMAT(TrackXNO#,4)
FORMAT(TrackYNO#,4)
FORMAT(TrackZNO#,4)
FORMAT(TrackZ#,4)
FORMAT(Recall#,5)
FORMAT(ADD#,5)
FORMAT(CS#,5)
FORMAT(PartNum#,5)
FORMAT(Program#,5)
FORMAT(Operation#,5)
FORMAT(Tool#,5)
FORMAT(NewWFO#,5)
FORMAT(Parts#,5)
FORMAT(Dwell#,6)
FORMAT(RapidF#,7)

{Prog Subroutines ****}

restoreScale:
IF Metric? {CAM file is in Metric, tools and tool path}
SetScale('.03937007874') { change to English, this is an English post}
END
RETURN

cSPartNum#:
ADD# CS# MUL# NumOfCS# SUB# PartNum# Num#('1')
RETURN

cSWFO:
'G' ADD# cSPartNum# Num#('53')
RETURN

wFO:
'G' ADD# PartNum# Num#('53')
RETURN

wFOStuff:
IF Flag?('2') { Need to output wFOStuff twice for MP-ESO-OTAP-ECP, once for all others }
IF NOT SameTool?
IF WFOCS?
cSWFO
ELSE
IF MultipleParts? AND WorkFixtureOffsets?
wFO
ELSE
WFO1
END
END
ELSE
IF WFOCS?
IF ChangeCS?
cSWFO
END
END
END
END
SetFlagF('2') { Do not output WFO second time wFOStuff is called for MP-WFO-OTAP-ECP }
RETURN

cSG52:
SeqC 'G52X' CSOffsetX# 'Y' CSOffsetY# 'Z' CSOffsetZ# EOL
RETURN

g52Stuff:
IF NOT Flag?('7') AND NOT WFOCS?
IF FirstOperation? OR NewTool? OR ChangeCS?
IF MultipleParts?
IF WorkFixtureOffsets?
cSG52
END
ELSE
cSG52
END
END
END
RETURN

doCSComment:
'( CS#' CS# ' - ' CSComment$ ' )' EOL
RETURN

doCSWFOComment:
IF FirstOperation? OR NewTool? OR ChangeCS?
'( ' cSWFO ' = X' CSOffsetX# ' Y' CSOffsetY# ' Z' CSOffsetZ#
IF Flag?('6') { TRUE = B-Style Output, FALSE = C-Style Output }
IF AAxisAvail?
' A' CSOffsetA#
END
IF BAxisAvail?
' B' CSOffsetB#
END
END
' )' EOL
IF NOT Flag?('7') { TRUE = Local WFO Coordinates, FALSE = D-Style Output }
SetFlag('2') { Need to output wFOStuff }
END
END
RETURN

cSComments:
doCSComment
IF WFOCS?
doCSWFOComment
END
RETURN

doPartCycleComment:
IF MultipleParts? AND UseComments? AND SubComment?
'( PART NO. ' PartNum# ' )' EOL
END
RETURN

doCycleComment:
IF UseComments? AND SubComment?
'( CYCLE START )' EOL
END
RETURN

doOpComments:
IF UseComments?
SetScale('1')
IF OperationIDComment?
'( OPERATION ' Operation# ': ' OperationType$ ' )' EOL
END
IF OperationComment?
'( ' OperationComment$ ' )' EOL
END
IF WorkGroupComment?
'( ' WorkGroupComment$ ' )' EOL
END
IF ToolTypeComment?
'( TOOL ' Tool# ': ' ToolDiameter# ' ' ToolType$ ' )' EOL
END
IF ToolComment?
'( ' ToolComment$ ' )' EOL
END
restoreScale
cSComments
END
RETURN

cSAngleA:
IF AAxisAvail?
IF Flag?('6') AND WFOCS? { TRUE = B-Style Output, FALSE = C-Style Output }
'A0'
ELSE
'A' CSOffsetA#
END
END
RETURN

cSAngleAC:
IF AChange?
cSAngleA
END
RETURN

cSAngleB:
IF BAxisAvail?
IF Flag?('6') AND WFOCS? { TRUE = B-Style Output, FALSE = C-Style Output }
'B0'
ELSE
'B' CSOffsetB#
END
END
RETURN

cSAngleBC:
IF BChange?
cSAngleB
END
RETURN

pSInit:
NewWFOF
FourthCWF
FourthCCWF
FifthCWF
FifthCCWF
RotateF
OptCyc1F
MasterOpF
CallMasterOpF
RETURN

pSStuff:
RETURN

doPostScript:
pSInit
EachPS
SeqC PostScript EOL
pSStuff
NextPS
RETURN

doEndOpPS:
pSInit
EachEOPS
SeqC EndOpPS EOL
pSStuff
NextPS
RETURN

loadPRIMEZCP2:
IF NOT Flag?('7')
LoadFeat Num#('0') Num#('0') PRIME ClearancePlane2#
ELSE
LoadFeat Num#('0') Num#('0') ADD# CSOffsetZ# PRIME ClearancePlane2#
END
RETURN

pRIMEZCP2:
IF NOT Flag?('7')
PRIME ZCP2
ELSE
'Z' TrackZ# ADD# CSOffsetZ# PRIME ClearancePlane2#
END
RETURN

loadPRIMEZCP3:
IF NOT Flag?('7')
LoadFeat Num#('0') Num#('0') PRIME ClearancePlane3#
ELSE
LoadFeat Num#('0') Num#('0') ADD# CSOffsetZ# PRIME ClearancePlane3#
END
RETURN

pRIMEZCP3:
IF NOT Flag?('7')
PRIME ZCP3
ELSE
'Z' TrackZ# ADD# CSOffsetZ# PRIME ClearancePlane3#
END
RETURN

connectC:
IF FeedConnect?
FeedC
ELSE
RapidC
END
RETURN

absValueC:
IF NOT AbsValue?
AbsValue
END
RETURN

incValueC:
IF AbsValue?
IncValue
END
RETURN

absOrIncC:
IF AbsoluteMoves?
absValueC
ELSE
incValueC
END
RETURN

entryMove:
IF Repeats? AND ZShiftOnly? AND FeedConnect?
SeqC FeedC ZInC
IF NOT EmptyLine?
FeedEntC
END
EOL
ELSE
IF FeedEntry?
SeqC FeedC ZInC
IF NOT EmptyLine?
FeedEntC
END
EOL
ELSE
SeqC RapidC ZInC EOL
END
END
RETURN

autoCycExitMove:
SeqC absOrIncC CRCOffC
IF FIFO?
FeedC pRIMEZCP2 FeedEntC
ELSE
RapidC pRIMEZCP2
END
EOL
RETURN

exitMove:
IF AutoCycle?
SeqC CRCOffC ZCP3C EOL
ELSE
IF FIFO?
SeqC CRCOffC FeedC ZCP3C FeedEntC EOL
ELSE
SeqC CRCOffC RapidC ZCP3C EOL
END
END
RETURN

finishSub1:
SeqC CRCOffC
IF NOT FeedConnect?
loadPRIMEZCP3
IF ZMove?
IF AutoCycle?
pRIMEZCP3
ELSE
IF FIFO?
FeedC pRIMEZCP3 FeedEntC
ELSE
RapidC pRIMEZCP3
END
END
END
END
EOL
RETURN

formatArc:
IF ArcCW?
CWArcC
ELSE
CCWArcC
END
MoveXYZC
IF ArcIJFormat?
ArcIJC
ELSE
ArcRC
END
RETURN

ckCRC:
IF LastFeat?
CRCOffC
ELSE
IF NOT ZMove?
CRCOnC
END
END
RETURN

ckCRCNum:
IF NOT LastFeat? AND Equal? SPZ# EPZ#
CRCOffsetC
END
RETURN

toolPath:
EACHFeat
IF PointFeat? { Drilling Only }
SeqC MoveSXYZC EOL
ELSE
IF RapidFeat?
IF XMove? OR YMove? OR ZMove?
SeqC ckCRC RapidC MoveXYZC ckCRCNum EOL
END
ELSE
IF LineFeat?
IF XMove? OR YMove? OR ZMove?
SeqC ckCRC FeedC MoveXYZC FeedRateC ckCRCNum EOL
END
ELSE
IF ArcFeat?
EACHQuadrant { Do not use NOT, FIRST, LAST or NEXT modifiers in this loop }
SeqC formatArc ArcFeedC EOL
NEXTQuadrant
END
END
END
END
NEXTFeat
RETURN

autoCycCutSub1: {part 1}
CalcACSRXY {calc tool position, CalcAutoCycleStatusRecordXY}
SaveSubStatus {save tool position}
SetPass1 {element cut moves}
SetSRXYtoSP
IF Repeats? AND ZShiftOnly?
entryMove
END
SeqC incValueC EOL
RETURN

autoCycCutSub2: {part 2}
SeqC absOrIncC CRCOffC
IF FIFO?
FeedC ZCP2C FeedEntC
ELSE
RapidC ZCP2C
END
EOL
SetSRSubXY {restore SR to 1st position value}
ReSetPass2 {restore for positioning moves}
RETURN

cutAutoCycle:
IF Repeats? AND NOT ZShiftOnly?
EachRep
IF NOT FirstCycle?
IF FIFO?
Rapid
END
SeqC RapidC StrtPos EOL
IF NOT FeedConnect?
SeqC ZCP2C EOL
END
END
END
EACHFeat
doCycleComment
IF SPXMove? OR SPYMove?
IF FIFO?
Rapid
END
SeqC RapidC MoveSXYC EOL
END
autoCycCutSub1
IF Repeats? AND ZShiftOnly?
EachRep
IF NOT FirstCycle?
doCycleComment
IF SPXMove? OR SPYMove?
SeqC connectC incValueC MoveSXYC EOL
END
absOrIncC
IF FeedConnect?
entryMove
ELSE
IF FeedEntry?
SeqC RapidC ZCP2C EOL
END
entryMove
END
SeqC incValueC EOL
END
toolPath
IF NOT FeedConnect?
autoCycExitMove
END
NextRep
ELSE
entryMove
toolPath
END
autoCycCutSub2
NEXTFeat
IF Repeats? AND NOT ZShiftOnly?
finishSub1
NextRep
END
SetPass1
RETURN

milling:
IF Repeats?
EachRep
doCycleComment
IF SPXMove? OR SPYMove?
SeqC connectC MoveSXYC EOL
END
IF FeedConnect?
entryMove
ELSE
IF FeedEntry?
SeqC RapidC ZCP2C EOL
END
entryMove
END
toolPath
finishSub1
NextRep
ELSE
entryMove
toolPath
END
RETURN

setDrillEndOpZ:
IF RetractToCP1?
TrackZNO# ClearancePlane1#
ELSE
TrackZNO# ClearancePlane2#
END
RETURN

drilling:
SeqC DrillCP EOL
GetCycle
SeqC Cycle FromCP ZDepth RLevel Dwell Peck Retract FeedEnt EOL
TrackZNO# FIRST SPZ# {.81.2}
toolPath
setDrillEndOpZ
SeqC DrillOff ZCP3C EOL
RETURN

longDrilling:
SeqC DrillCP EOL
GetCycle
SeqC StrtPosC EOL
toolPath
LoadFeat Num#('0') Num#('0') ClearancePlane3#
IF ZMove?
SeqC RapidC ZCP3C EOL
END
RETURN

checkPass: {use the correct StrtPos}
IF AutoCycle?
SetPass2
ELSE
SetPass1
END
IF NOT Flag?('7') { TRUE = Local WFO Coordinates, FALSE = D-Style Output }
ClearCSOffset
END
RETURN

opGuts:
ResetCRCNum
IF FirstOperation? OR NewTool?
RapidF# { Forces FeedEntC/FeedRateC }
END
IF Milling?
SeqC ZCP2C EOL
IF AutoCycle?
cutAutoCycle
ELSE
milling
END
exitMove
ELSE
IF Drilling?
drilling
END
END
RETURN

progStart:
InitProg
ReverseXZArcs
InitWFONum
SetFlood
SetMaxRPM('10000')
IF Metric?
SetMaxFeed('12700')
ELSE
SetMaxFeed('500')
END
Save# Num#('1') Num#('0') { MultipleParts Current Tool FirstOp# }
Save# Num#('2') Num#('0') { MultipleParts ToolOp# Counter }
Save# Num#('3') Num#('0') { LongHand PeckCycle }
SetFlagF('2') { Need to output wFOStuff twice for MP-ESO-OTAP-ECP, once for all others }
SetFlag('3') { Incrementing WFOs in effect }
SetFlag('4') { This post supports IncWFO/DecWFO }
SetFlag('6') { TRUE = B-Style Output, FALSE = C-Style Output }
SetFlagF('7') { TRUE = D-Style Output }
SetFlagF('8') { TRUE = D-Style Output, FALSE = Local G52-WFO Coordinates }
IF PSComment? AND UseComments?
'Utility Data:' EOL
' At Op Start: All literals and commands will appear at the beginning of the operation.' EOL
' At Op End: All literals and commands will appear at the end of the operation.' EOL
' Literals: put between single or double quotes.' EOL
' Separate commands and literals with at least one space.' EOL
' A CR ( RETURN key ) will start a new line.' EOL
' Commands: may be capital and/or lower case letters. Separate commands with a space.' EOL
END

IF NOT Flag?('7')
IF Equal? NumOfCS# Num#('1') { 3 Axis Part - Output M-Style }
SetFlag('7')
ELSE
IF MultipleParts?
IF WorkFixtureOffsets?
IF LTEqual? MUL# Parts# NumOfCS# Num#('6')
SetWFOCS { use WFO for CS changes }
ELSE
IF Flag?('8')
SetFlag('7')
END
IF UseComments?
'( Not enough Work Fixture Offsets to handle this part. )' EOL
'( Number of parts [ ' Parts# ' ] times CSs [ ' NumOfCS# ' ] )' EOL
'( exceeds the machine limit. Switching to '
IF Flag?('7')
'non'
ELSE
'G52'
END
'-wfo style output. )' EOL
END
END
ELSE
SetFlag('7')
END
ELSE
IF LTEqual? NumOfCS# Num#('6') {****}
SetWFOCS { use WFO for CS changes }
ELSE
IF Flag?('8')
SetFlag('7')
END
IF UseComments?
'( Not enough Work Fixture Offsets to handle this part. )' EOL
'( Number of CSs [ ' NumOfCS# ' ] exceeds the machine limit. )' EOL
'( Switching to '
IF Flag?('7')
'non'
ELSE
'G52'
END
'-wfo style output. )' EOL
END
END
END
END
END
RETURN

initOp:
EOR EOL
'O' Program# EOL
IF UseComments? AND ProgramNameComment?
'( ' ProgramName$ ' )'
END
EOL
EachOp
IF FirstOperation?
IF ToolChangeAtHome?
SetHome
END
END
NextOp
IF UseComments?
IF ProgramComment?
'( ' ProgramComment$ ' )' EOL
END
IF FormatNameComment?
'( FORMAT: ' FormatName$ ' )' EOL
END
IF TimeComment?
'( ' Date$ ' AT ' Time$ ' )' EOL
END
IF MovesComment?
'( OUTPUT IN ' MoveType$ ' INCHES )' EOL
END
IF PartsComment?
'( PARTS PROGRAMMED: ' Parts# ' )' EOL
END
IF StartToolComment?
'( FIRST TOOL NOT IN SPINDLE )' EOL
END
END
restoreScale
RETURN

firstOp1:
SeqC Rapid Plane 'G20' CRCOff WFO1 'G64' DrillOff AbsOrInc 'G98' EOL
IF UseComments?
'( Mach Work Offset )' EOL
END
SetLineStrtChr('/')
SeqC '(G54)G10L2P1X0Y0Z0' EOL
SeqC '(G55)G10L2P2X0Y0Z0' EOL
SeqC '(G56)G10L2P3X0Y0Z0' EOL
SeqC '(G57)G10L2P4X0Y0Z0' EOL
SetLineStrtChr('')
SeqC 'T99' EOL
Seq OpToolID EOL
Seq ToolChng EOL
doPartCycleComment
doOpComments
doPostScript
RETURN

firstOp2:
g52Stuff
checkPass
Seq SetAbs absOrIncC wFOStuff cSAngleA cSAngleB EOL
SeqC 'G100' PlaneC StrtPos ZCP1 Speed
IF LastTool?
'T99'
ELSE
PreTool
END
ToolOfst EOL
RETURN

firstOp3:
IF CoolOff?
SeqC CoolOff EOL
END
RETURN

newToolOp1:
RETURN

newToolOp2:
doEndOpPS
IF ToolChangeAtHome?
SeqC incValueC OfstOff EOL
SeqC absOrIncC Rapid PRIME Home ASCII('13') EOL
ELSE
' ' EOL
END
RETURN

newToolOp3: {Start new Operation}
Seq ToolChng EOL
IF LAST ProgStop?
SeqC 'M0' ASCII('13') EOL
END
doPartCycleComment
doOpComments
doPostScript
RETURN

newToolOp4:
g52Stuff
checkPass
Seq SetAbs absOrIncC wFOStuff cSAngleA cSAngleB EOL
SeqC 'G100' PlaneC StrtPos ZCP1 Speed
IF LastTool?
'T99'
ELSE
PreTool
END
ToolOfst EOL
RETURN

newToolOp5:
IF CoolOff?
SeqC CoolOff EOL
END
RETURN

sameToolOp1:
doEndOpPS
IF LAST ProgStop?
SeqC incValueC OfstOff EOL
SeqC 'M0' ASCII('13') EOL
ELSE
IF NewToolOffset? OR AChange? OR BChange?
SeqC incValueC OfstOff ASCII('13') EOL
ELSE
' ' EOL
END
END
RETURN

sameToolOp2: {Start new Operation}
doPartCycleComment
doOpComments
doPostScript
checkPass
RETURN

sameToolOp3: {Start new Operation}
g52Stuff
IF LAST ProgStop?
SeqC absOrIncC wFOStuff RapidC cSAngleA cSAngleB EOL
SeqC PlaneC StrtPos SpeedC SpinOn EOL
SeqC OfstOn CoolOn EOL
ELSE
SeqC absOrIncC wFOStuff RapidC cSAngleA cSAngleB EOL
SeqC PlaneC StrtPos SpeedC EOL
SeqC
IF NewToolOffset? OR AChange? OR BChange?
OfstOn
END
IF NOT CoolOff? AND LAST CoolOff?
CoolOn
END
IF CoolOff? AND LAST NOT CoolOff?
CoolOff
END
EOL
END
RETURN

end1:
RETURN

end2:
doEndOpPS
IF MultipleParts? AND AllToolsOnePart? AND NOT LastPart?
IF FIRST ToolChangeAtHome? {added FIRST modifier}
SeqC incValueC OfstOff EOL
IF Equal? CSOffsetA# Num#('0') AND Equal? CSOffsetB# Num#('0')
SeqC absOrIncC Rapid PRIME FirstHome ASCII('13') EOL
ELSE
SeqC absOrIncC Rapid PRIME FirstHome EOL
SeqC absOrIncC
IF AAxisAvail?
cSAngleA
END
IF BAxisAvail?
cSAngleB
END
EOL
SeqC Preset
IF AAxisAvail?
'A0'
END
IF BAxisAvail?
'B0'
END
ASCII('13') EOL
END
ELSE
IF Equal? CSOffsetA# Num#('0') AND Equal? CSOffsetB# Num#('0')
' ' EOL
ELSE
SeqC absOrIncC
IF AAxisAvail?
cSAngleA
END
IF BAxisAvail?
cSAngleB
END
EOL
SeqC Preset
IF AAxisAvail?
'A0'
END
IF BAxisAvail?
'B0'
END
ASCII('13') EOL
END
END
ELSE
IF FIRST ToolChangeAtHome? {added FIRST modifier}
SeqC incValueC OfstOff EOL
IF Equal? CSOffsetA# Num#('0') AND Equal? CSOffsetB# Num#('0')
SeqC absOrIncC Rapid PRIME FirstHome ASCII('13') EOL
ELSE
SeqC absOrIncC Rapid PRIME FirstHome EOL
SeqC absOrIncC
IF AAxisAvail?
cSAngleA
END
IF BAxisAvail?
cSAngleB
END
EOL
SeqC Preset
IF AAxisAvail?
'A0'
END
IF BAxisAvail?
'B0'
END
ASCII('13') EOL
END
ELSE
IF Equal? CSOffsetA# Num#('0') AND Equal? CSOffsetB# Num#('0')
' ' EOL
ELSE
SeqC incValueC OfstOff EOL
SeqC absOrIncC
IF AAxisAvail?
cSAngleA
END
IF BAxisAvail?
cSAngleB
END
EOL
SeqC Preset
IF AAxisAvail?
'A0'
END
IF BAxisAvail?
'B0'
END
ASCII('13') EOL
END
END
END
RETURN

end3:
SeqC ToolChng EOL
SeqC incValueC 'G28Y0' EOL
SeqC UnTool EOL
IF UseComments?
'( Please Return PCR, Tool Sheet, And Program When Job Is Comp. )' EOL
END
SeqC EOP EOL
EOR EOL
Close
IF UseComments?
SetScale('1') {restore scale for comments}
Reopen
IF FileBytesComment?
'( FILE LENGTH: ' FileBytes# ' CHARACTERS )' EOL
END
IF FileFeetComment?
'( FILE LENGTH: ' FileFeet# ' FEET )' EOL
END
IF FileMetersComment?
'( FILE LENGTH: ' FileMeters# ' METERS )' EOL
END
Close
END
RETURN

mPallTools1P: {Multiple Parts, All Tools 1 Part}
IF FirstOperation? OR EquallySpacedOffsets?
SetFlag('2') { Need to output wFOStuff twice for MP-ESO-OTAP-ECP, once for all others }
END
IF FirstOperation?
firstOp1
firstOp2
firstOp3
ELSE
IF NewTool?
newToolOp1
newToolOp2
newToolOp3
newToolOp4
newToolOp5
ELSE {implied SameTool?}
sameToolOp1
sameToolOp2
sameToolOp3
END
END
opGuts
RETURN

mP1ToollAllPfu: {Multiple Parts, 1 Tool all Parts, full up}
SetFlag('2') { Need to output wFOStuff twice for MP-ESO-OTAP-ECP, once for all others }
IF FirstOperation?
firstOp1
firstOp2
firstOp3
ELSE
IF NewTool?
newToolOp1
newToolOp2
newToolOp3
newToolOp4
newToolOp5
ELSE {implied SameTool?}
sameToolOp1
sameToolOp2
sameToolOp3
END
END
opGuts
RETURN

mP1ToollAllPXcp: {Multiple Parts, 1 Tool all Parts, exit Clearance plane}
SetFlag('2') { Need to output wFOStuff twice for MP-ESO-OTAP-ECP, once for all others }
IF FirstOperation?
firstOp1
firstOp2
firstOp3
ELSE
IF NewTool?
newToolOp1
newToolOp2
newToolOp3
newToolOp4
newToolOp5
ELSE {implied SameTool?}
sameToolOp1
sameToolOp2
sameToolOp3
END
END
opGuts
RETURN

noMPs: {no multiple parts}
SetFlag('2') { Need to output wFOStuff twice for MP-ESO-OTAP-ECP, once for all others }
IF FirstOperation?
firstOp1
firstOp2
firstOp3
ELSE
IF NewTool?
newToolOp1
newToolOp2
newToolOp3
newToolOp4
newToolOp5
ELSE {implied SameTool?}
sameToolOp1
sameToolOp2
sameToolOp3
END
END
opGuts
RETURN

masterSub:
IF MultipleParts?
IF AllToolsOnePart?
mPallTools1P
ELSE {implied OneToolAllParts?}
IF FullUp?
mP1ToollAllPfu
ELSE {implied ExitClearancePlane?}
mP1ToollAllPXcp
END
END
ELSE
noMPs
END
RETURN

endPartSub:
{End of program ************************************************************}

{finish last operation}
end1
end2
RETURN

newPart1: {Finish off last Part}
IF FullUp?
SeqC incValueC OfstOff ASCII('13') EOL
ELSE
' ' EOL
END
{doEndOpPS}
RETURN

newPart2: {Start new Part}
sameToolOp2
RETURN

newPart3: {Start new Part}
SetFlag('2') { Need to output wFOStuff twice for MP-ESO-OTAP-ECP, once for all others }
g52Stuff
Seq SetAbs absOrIncC wFOStuff cSAngleA cSAngleB EOL
SeqC 'G100' PlaneC StrtPos
IF FullUp?
ZCP1
END
Speed
IF FullUp?
ToolOfst
END
EOL
RETURN

toggleIncDecWFO:
IF Flag?('3') { Incrementing WFOs in effect }
SetFlagF('3')
ELSE { Decrementing WFOs in effect }
SetFlag('3')
END
RETURN

mPLoop:
Save# Num#('2') Recall# Num#('1')
IF WorkFixtureOffsets?
IF Flag?('3') { Incrementing WFOs in effect }
NewWFO
ELSE
LastWFO
END
EachWFO
ELSE
EachPart
END
IF AllToolsOnePart?
EachOp
masterSub
NextOp
endPartSub
ELSE { OneToolAllParts }
EachOp
IF Equal? Operation# Recall# Num#('2') { Valid Tool Op }
IF FirstOperation? OR NewTool?
IF FirstPart? AND Flag?('3') { Incrementing WFOs in effect }
masterSub
ELSE
IF LastPart? AND NOT Flag?('3') { Decrementing WFOs in effect }
masterSub
ELSE
newPart1
newPart2
newPart3
opGuts
END
END
ELSE
masterSub
END
IF LastOp?
IF LastPart? AND Flag?('3') { Incrementing WFOs in effect }
Save# Num#('1') Num#('0')
ELSE
IF FirstPart? AND NOT Flag?('3') { Decrementing WFOs in effect }
Save# Num#('1') Num#('0')
END
END
Save# Num#('2') Recall# Num#('1')
ELSE
IF NEXT SameTool?
Save# Num#('2') NEXT Operation#
ELSE
IF LastPart? AND Flag?('3') { Incrementing WFOs in effect }
Save# Num#('1') NEXT Operation#
Save# Num#('2') Num#('0')
ELSE
IF FirstPart? AND NOT Flag?('3') { Decrementing WFOs in effect }
Save# Num#('1') NEXT Operation#
Save# Num#('2') Num#('0')
ELSE
Save# Num#('2') Recall# Num#('1')
END
END
END
END
END
NextOp
END
IF WorkFixtureOffsets?
IF Flag?('3') { Incrementing WFOs in effect }
IncWFO
NextWFO
DecWFO
ELSE { Decrementing WFOs in effect }
DecWFO
NextPrevWFO
IncWFO
END
IF Flag?('4') { This post supports IncWFO/DecWFO }
toggleIncDecWFO
END
ELSE
NextPart
END
RETURN

{Start of executable Prog, Top Level ****}

progStart {setup and initializations}
initOp

IF MultipleParts?
IF WorkFixtureOffsets?
{'NOTE: This Post Processor does not support Work Fixture Offsets for Multiple Parts.' EOL
'It is recommended that you change your selection to Equally Spaced Offsets.' EOL}
END
IF AllToolsOnePart?
mPLoop
ELSE
EachOp
IF FirstOperation?
Save# Num#('1') Operation#
END
NextOp
mPLoop mPLoop mPLoop mPLoop mPLoop
mPLoop mPLoop mPLoop mPLoop mPLoop
mPLoop mPLoop mPLoop mPLoop mPLoop
mPLoop mPLoop mPLoop mPLoop mPLoop
mPLoop mPLoop mPLoop mPLoop mPLoop
endPartSub
END
ELSE
EachOp
masterSub
NextOp
endPartSub
END
end3