FZ-DZ 15-pos.T (basket changer) 2.7 Special functions H58 = In automatic mode "Release tool" with key H59 = Clear function H58 The following message appears if the function is selected: 700162 0 0 "H58/H59 ACTIVE (TOOL RELEASE WITH PUSH BUTTON)" Page 55. Ò! It is necessary to release the tool in the program for special measuring tests Ò! If function H58 has been output, the spindle tool can be released with key "Tool Unlocking" while the program is running (with the spindle still and no feed). Ò! Cancellation is made with "H59" or "RESET" . Service mode: For test runs, you can enter a speed, also if the tool changer is "down . M88 & H33 = Speed input is also possible if the changer is down M88 & H34 = Deactivate H33 Service mode: For test runs, the "Tool correctly clamped" monitoring can be deactivated. M105 = No "Clamped without tool" monitoring This function is again cleared with JOG and RESET or Machine Control Off . M88 & M115 = No "Tool incorrectly clamped monitoring This function is again cleared with M88 or Machine Control Off . 29.01.08 / 11:21 / HR r - fz-dz15-pos-wz-siemens840d-cd02-01-mu-en Page 14 of 59