Audi 80 2 0 (140koni) automatyczny napinacz


ïż




Audi 80 (91-96)2,0 1992-96
Engine code: ACE
Important note
Replacement Interval Guide
Check For Engine Damage
Repair Times â€Ã³ lirs
Special Tools
Special Piecautions
Removal
Installation
Installation
1.    Ensure timing marks aligned [2] & [4].
2.    If cylinder head cover removed: Ensure camshaft sprocket rear timing mark aligned (11 ]. NOTE: Notch aligned with upper cylinder head face.
3.    Fit timing belt in anti-clockwise direction, starting at crankshaft sprocket.
4.    Turn tensioner anti-clockwise until it touches stop. Use wrench Matra V.159 (9).
5.    Release tension until marks align exactly [10].
NOTE: Engine must he cold.
6.    Tighten tensioner nut. Tightening torque: 25 Nm [8].
7.    Turn crankshaft two turns clockwise. Ensure timing marks aligned [2] & [4].
8.    Check tensioner marks aligned [10].
9.    If not: Repeat tensioning procedure.
10.    Apply firm thumb pressure to belt at^. Tensioner marks must move apart [10].
11.    Release thumb pressure from belt at^.
12.    Turn crankshaft two turns clockwise. Ensure timing marks aligned [2] & [4].
13.    Tensioner marks should realign [10].
14.    Install components in reverse order of removal.
15.    Tighten crankshaft pulley bolts. Tightening torque: 20 Nm [5].
NOTE: Crankshaft pulley holt holes are offset.
11302
J



Wyszukiwarka