intLoopBackC.addSC("access-expression", "Build a bridge boolean access expression"); intLoopBackC["access-expression"].addSC("input", "Filter input packets"); intLoopBackC["access-expression"].addSC("output", "Filter output packets"); intLoopBackC.addSC("apollo", "Apollo interface subcommands"); intLoopBackC.apollo.addSC("access-group", "Apply an access list to output packets"); intLoopBackC.apollo.addSC("network", "Assign an Apollo network & enable Apollo routing"); intLoopBackC.apollo.addSC("update-time", "Set Apollo routing update timer"); intLoopBackC.addSC("appletalk", "Appletalk interface subcommands"); intLoopBackC.appletalk.addSC("access-group", "Apply an access list to inbound or outbound packets"); intLoopBackC.appletalk.addSC("address", "Set appletalk Phase 1 address"); intLoopBackC.appletalk.addSC("arp-timeout", "arp-timeout"); intLoopBackC.appletalk.addSC("cable-range", "Set appletalk Phase 2 address"); intLoopBackC.appletalk.addSC("discovery", "Reset discovery mode for new cable range discovery"); intLoopBackC.appletalk.addSC("distribute-list", "Filter networks from routing updates"); intLoopBackC.appletalk.addSC("domain-group", "Specify appletalk domain"); intLoopBackC.appletalk.addSC("eigrp-bandwidth-percent", "Set EIGRP bandwidth limit"); intLoopBackC.appletalk.addSC("eigrp-splithorizon", "Enable Split Horizon processing generating AT/EIGRP updates"); intLoopBackC.appletalk.addSC("eigrp-timers", "AT/EIGRP hello and holdtime timers"); intLoopBackC.appletalk.addSC("free-trade-zone", "Enhanced security for one-way shared networks"); intLoopBackC.appletalk.addSC("getzonelist-filter", "Filter zone-list replies"); intLoopBackC.appletalk.addSC("glean-packets", "Glean AARP information from packets"); intLoopBackC.appletalk.addSC("protocol", "Select AppleTalk routing protocol"); intLoopBackC.appletalk.addSC("route-cache", "Enable appletalk route cache"); intLoopBackC.appletalk.addSC("rtmp-splithorizon", "Enable Split Horizon processing generating AT/RTMP updates"); intLoopBackC.appletalk.addSC("rtmp-stub", "Send only RTMP stubs, no routes in updates"); intLoopBackC.appletalk.addSC("send-rtmps", "Send Appletalk routing updates"); intLoopBackC.appletalk.addSC("zip-reply-filter", "Filter ZIP replies"); intLoopBackC.appletalk.addSC("zone", "Assign an appletalk zone name"); intLoopBackC.addSC("arp", "Set arp type (arpa, probe, snap) or timeout"); intLoopBackC.arp.addSC("arpa", "Standard arp protocol"); intLoopBackC.arp.addSC("frame-relay", "Enable ARP for a frame relay interface"); intLoopBackC.arp.addSC("probe", "HP style arp protocol"); intLoopBackC.arp.addSC("snap", "IEEE 802.3 style arp"); intLoopBackC.arp.addSC("timeout", "Set ARP cache timeout"); intLoopBackC.addSC("backup", "Modify backup parameters"); intLoopBackC.backup.addSC("delay", "Delays before backup line up or down transitions"); intLoopBackC.backup.addSC("interface", "Configure an interface as a backup"); intLoopBackC.backup.addSC("load", "Load thresholds for line up or down transitions"); intLoopBackC.addSC("bandwidth", "Set bandwidth informational parameter"); intLoopBackC.bandwidth.addSC("<1-10000000>", "Bandwidth in kilobits"); intLoopBackC.addSC("bridge-group", "Transparent bridging interface parameters"); intLoopBackC["bridge-group"].addSC("<1-255>", "Assign an interface to a Bridge Group."); intLoopBackC.addSC("carrier-delay", "Specify delay for interface transitions"); intLoopBackC["carrier-delay"].addSC("<0-60>", "Carrier Transitions delay seconds"); intLoopBackC["carrier-delay"].addSC("msec", "delay specified in milliseconds"); intLoopBackC.addSC("cdp", "CDP interface subcommands"); intLoopBackC.cdp.addSC("enable", "Enable CDP on interface"); intLoopBackC.addSC("clns", "CLNS interface subcommands"); intLoopBackC.clns.addSC("access-group", "Filter inbound or outbound CLNS traffic"); intLoopBackC.clns.addSC("adjacency-filter", "Filter adjacencies"); intLoopBackC.clns.addSC("checksum", "Enable checksum generation"); intLoopBackC.clns.addSC("cluster-alias", "Enable DECnet Phase V cluster aliasing"); intLoopBackC.clns.addSC("congestion-threshold", "Set the congestion experience bit if the output queue contains more than the specified number of packets"); intLoopBackC.clns.addSC("dec-compatible", "Received NSAPs do not contain N-selector octet"); intLoopBackC.clns.addSC("enable", "Enable CLNS and ES-IS routing on interface"); intLoopBackC.clns.addSC("erpdu-interval", "Minimum interval between ERPDUs"); intLoopBackC.clns.addSC("es-neighbor", "End system SNPA static mapping configuration"); intLoopBackC.clns.addSC("esct-time", "Suggested ES configuration time"); intLoopBackC.clns.addSC("is-neighbor", "Intermediate system SNPA static mapping configuration"); intLoopBackC.clns.addSC("mtu", "Set MTU packet size for interface"); intLoopBackC.clns.addSC("net", "Set the CLNS address for this interface"); intLoopBackC.clns.addSC("rdpdu-interval", "Define the minimum interval between Redirect PDUs"); intLoopBackC.clns.addSC("route-cache", "Enable fast switching through the cache"); intLoopBackC.clns.addSC("router", "Enable CLNS routing protocol on interface"); intLoopBackC.clns.addSC("send-erpdu", "Send error PDUs when an error is detected in a data PDU"); intLoopBackC.clns.addSC("send-rdpdu", "Send redirect PDUs to optimize routing"); intLoopBackC.clns.addSC("split-horizon", "Enable ISO-IGRP split horizon"); intLoopBackC.addSC("crypto", "Encryption/Decryption commands"); intLoopBackC.crypto.addSC("map", "Assign a Crypto Map"); intLoopBackC.crypto.map.addSC("WORD", "Crypto Map tag"); intLoopBackC.addSC("decnet", "Interface DECnet config commands"); intLoopBackC.decnet.addSC("<0-3>", "ATG network number"); intLoopBackC.decnet.addSC("access-group", "Set access control for outgoing packets"); intLoopBackC.decnet.addSC("accounting", "Enable Accounting of DECnet traffic"); intLoopBackC.decnet.addSC("cluster-holdtime", "Interval to hold PhaseIV VAX cluster adjacencies"); intLoopBackC.decnet.addSC("congestion-threshold", "Congestion avoidance threshold"); intLoopBackC.decnet.addSC("cost", "Set cost value for interface"); intLoopBackC.decnet.addSC("hello-timer", "Set interval between transmitted HELLO messages"); intLoopBackC.decnet.addSC("in-routing-filter", "Set up access control for incoming routing information"); intLoopBackC.decnet.addSC("multicast-map", "DECnet multicast mapping on token ring"); intLoopBackC.decnet.addSC("out-routing-filter", "Set up access control for outgoing routing information"); intLoopBackC.decnet.addSC("route-cache", "Enable fast-switching of DECnet datagrams"); intLoopBackC.decnet.addSC("router-priority", "Set priority for determining default router"); intLoopBackC.decnet.addSC("routing-timer", "Set interval between transmitted routing messages"); intLoopBackC.decnet.addSC("split-horizon", "Enable split horizon on interface"); intLoopBackC.addSC("default", "Set a command to its defaults"); intLoopBackC["default"].addSC("access-expression", "Build a bridge boolean access expression"); intLoopBackC["default"].addSC("apollo", "Apollo interface subcommands"); intLoopBackC["default"].addSC("appletalk", "Appletalk interface subcommands"); intLoopBackC["default"].addSC("arp", "Set arp type (arpa, probe, snap) or timeout"); intLoopBackC["default"].addSC("backup", "Modify backup parameters"); intLoopBackC["default"].addSC("bandwidth", "Set bandwidth informational parameter"); intLoopBackC["default"].addSC("bridge-group", "Transparent bridging interface parameters"); intLoopBackC["default"].addSC("carrier-delay", "Specify delay for interface transitions"); intLoopBackC["default"].addSC("cdp", "CDP interface subcommands"); intLoopBackC["default"].addSC("clns", "CLNS interface subcommands"); intLoopBackC["default"].addSC("crypto", "Encryption/Decryption commands"); intLoopBackC["default"].addSC("decnet", "Interface DECnet config commands"); intLoopBackC.addSC("delay", "Specify interface throughput delay"); intLoopBackC.delay.addSC("<1-16777215>", "Throughput delay (tens of microseconds)"); intLoopBackC.addSC("description", "Interface specific description"); intLoopBackC.description.addSC("LINE", "Up to 240 characters describing this interface"); intLoopBackC.addSC("dspu", "Down Stream PU"); intLoopBackC.dspu.addSC("enable-host", "DSPU Enable Host command"); intLoopBackC.dspu.addSC("enable-pu", "DSPU Enable Pu command"); intLoopBackC.dspu.addSC("start", "DSPU Start command"); intLoopBackC.addSC("exit", "Exit from interface configuration mode"); intLoopBackC.addSC("fras", "DLC Switch Interface Command"); intLoopBackC.fras.addSC("backup", "Setup backup route"); intLoopBackC.fras.addSC("ban", "RFC 1490 bridged 802.5"); intLoopBackC.fras.addSC("ddr-backup", "Setup backup route"); intLoopBackC.fras.addSC("map", "Set forwarding of frames"); intLoopBackC.addSC("h323-gateway", "Configure H323 Gateway"); intLoopBackC["h323-gateway"].addSC("voip", "Configure H323 Gateway Voip Interface"); intLoopBackC.addSC("help", "Description of the interactive help system"); intLoopBackC.addSC("hold-queue", "Set hold queue depth"); intLoopBackC["hold-queue"].addSC("<0-4096>", "Queue length"); intLoopBackC.addSC("ip", "Interface Internet Protocol config commands"); intLoopBackC.ip.addSC("access-group", "Specify access control for packets"); intLoopBackC.ip.addSC("accounting", "Enable IP accounting on this interface"); intLoopBackC.ip.addSC("address", "Set the IP address of an interface"); intLoopBackC.ip.address.addSC("A.B.C.D", "IP address"); intLoopBackC.ip.address["A.B.C.D"].addSC("A.B.C.D", "IP subnet mask"); intLoopBackC.ip.address["A.B.C.D"]["A.B.C.D"].addSC("secondary", "Make this IP address a secondary address"); intLoopBackC.ip.addSC("authentication", "authentication subcommands"); intLoopBackC.ip.addSC("bandwidth-percent", "Set EIGRP bandwidth limit"); intLoopBackC.ip["bandwidth-percent"].addSC("eigrp", "Enhanced Interior Gateway Routing Protocol (EIGRP)"); intLoopBackC.ip["bandwidth-percent"].eigrp.addSC("<1-65535>", "Autonomous system number"); intLoopBackC.ip["bandwidth-percent"].eigrp["<1-65535>"].addSC("<1-999999>", "Maximum bandwidth percentage that EIGRP may use"); intLoopBackC.ip.addSC("bgp", "BGP interface commands"); intLoopBackC.ip.addSC("broadcast-address", "Set the broadcast address of an interface"); intLoopBackC.ip.addSC("cef", "Cisco Express Fowarding interface commands"); intLoopBackC.ip.addSC("cgmp", "Enable/disable CGMP"); intLoopBackC.ip.addSC("dhcp", "Configure DHCP parameters for this interface"); intLoopBackC.ip.addSC("directed-broadcast", "Enable forwarding of directed broadcasts"); intLoopBackC.ip.addSC("dvmrp", "DVMRP interface commands"); intLoopBackC.ip.addSC("hello-interval", "Configures IP-EIGRP hello interval"); intLoopBackC.ip.addSC("helper-address", "Specify a destination address for UDP broadcasts"); intLoopBackC.ip.addSC("hold-time", "Configures IP-EIGRP hold time"); intLoopBackC.ip.addSC("igmp", "IGMP interface commands"); intLoopBackC.ip.addSC("irdp", "ICMP Router Discovery Protocol"); intLoopBackC.ip.addSC("load-sharing", "Style of load sharing"); intLoopBackC.ip.addSC("mask-reply", "Enable sending ICMP Mask Reply messages"); intLoopBackC.ip.addSC("mobile", "Mobile IP support"); intLoopBackC.ip.addSC("mrm", "Configure IP Multicast Routing Monitor tester"); intLoopBackC.ip.addSC("mroute-cache", "Enable switching cache for incoming multicast packets"); intLoopBackC.ip.addSC("mtu", "Set IP Maximum Transmission Unit"); intLoopBackC.ip.addSC("multicast", "IP multicast interface commands"); intLoopBackC.ip.addSC("nat", "NAT interface commands"); intLoopBackC.ip.nat.addSC("inside", "Inside interface for address translation"); intLoopBackC.ip.nat.addSC("outside", "Outside interface for address translation"); intLoopBackC.ip.addSC("nbar", "Network-Based Application Recognition"); intLoopBackC.ip.addSC("ospf", "OSPF interface commands"); intLoopBackC.ip.ospf.addSC("authentication", "Enable authentication"); intLoopBackC.ip.ospf.addSC("authentication-key", "Authentication password (key)"); intLoopBackC.ip.ospf.addSC("cost", "Interface cost"); intLoopBackC.ip.ospf.cost.addSC("<1-65535>", "Cost"); intLoopBackC.ip.ospf.addSC("database-filter", "Filter OSPF LSA during synchronization and flooding"); intLoopBackC.ip.ospf.addSC("dead-interval", "Interval after which a neighbor is declared dead"); intLoopBackC.ip.ospf["dead-interval"].addSC("<1-65535>", "Seconds"); intLoopBackC.ip.ospf.addSC("demand-circuit", "OSPF demand circuit"); intLoopBackC.ip.ospf.addSC("flood-reduction", "OSPF Flood Reduction"); intLoopBackC.ip.ospf.addSC("hello-interval", "Time between HELLO packets"); intLoopBackC.ip.ospf["hello-interval"].addSC("<1-65535>", "Seconds"); intLoopBackC.ip.ospf.addSC("message-digest-key", "Message digest authentication password (key)"); intLoopBackC.ip.ospf.addSC("mtu-ignore", "Ignores the MTU in DBD packets"); intLoopBackC.ip.ospf.addSC("network", "Network type"); intLoopBackC.ip.ospf.addSC("priority", "Router priority"); intLoopBackC.ip.ospf.addSC("retransmit-interval", "Time between retransmitting lost link state advertisements"); intLoopBackC.ip.ospf.addSC("transmit-delay", "Link state transmit delay"); intLoopBackC.ip.addSC("pgm", "PGM Reliable Transport Protocol"); intLoopBackC.ip.addSC("pim", "PIM interface commands"); intLoopBackC.ip.addSC("policy", "Enable policy routing"); intLoopBackC.ip.addSC("probe", "Enable HP Probe support"); intLoopBackC.ip.addSC("proxy-arp", "Enable proxy ARP"); intLoopBackC.ip.addSC("rarp-server", "Enable RARP server for static arp entries"); intLoopBackC.ip.addSC("redirects", "Enable sending ICMP Redirect messages"); intLoopBackC.ip.addSC("rgmp", "Enable/disable RGMP"); intLoopBackC.ip.addSC("rip", "Router Information Protocol"); intLoopBackC.ip.addSC("route-cache", "Enable fast-switching cache for outgoing packets"); intLoopBackC.ip.addSC("router", "IP router interface commands"); intLoopBackC.ip.addSC("rsvp", "RSVP interface commands"); intLoopBackC.ip.addSC("rtp", "RTP parameters"); intLoopBackC.ip.addSC("sap", "Session Announcement Protocol interface commands"); intLoopBackC.ip.addSC("security", "DDN IP Security Option"); intLoopBackC.ip.addSC("split-horizon", "Perform split horizon"); intLoopBackC.ip.addSC("summary-address", "Perform address summarization"); intLoopBackC.ip["summary-address"].addSC("eigrp", "Enhanced Interior Gateway Routing Protocol (EIGRP)"); intLoopBackC.ip["summary-address"].eigrp.addSC("<1-65535>", "Autonomous system number"); intLoopBackC.ip["summary-address"].eigrp["<1-65535>"].addSC("A.B.C.D", "IP address"); intLoopBackC.ip["summary-address"].eigrp["<1-65535>"]["A.B.C.D"].addSC("A.B.C.D", "IP network mask"); intLoopBackC.ip["summary-address"].eigrp["<1-65535>"]["A.B.C.D"]["A.B.C.D"].addSC("<1-255>", "Administrative distance"); intLoopBackC.ip["summary-address"].addSC("rip", "Routing Information Protocol (RIP)"); intLoopBackC.ip["summary-address"].rip.addSC("A.B.C.D", "IP address"); intLoopBackC.ip["summary-address"].rip["A.B.C.D"].addSC("A.B.C.D", "IP network mask"); intLoopBackC.ip.addSC("tcp", "TCP header compression parameters"); intLoopBackC.ip.addSC("unnumbered", "Enable IP processing without an explicit address"); intLoopBackC.ip.addSC("unreachables", "Enable sending ICMP Unreachable messages"); intLoopBackC.ip.addSC("urd", "Configure URL Rendezvousing"); intLoopBackC.ip.addSC("verify", "Enable per packet validation"); intLoopBackC.ip.addSC("vrf", "VPN Routing/Forwarding parameters on the interface"); intLoopBackC.ip.addSC("wccp", "WCCP interface commands"); intLoopBackC.addSC("ipx", "Novell/IPX interface subcommands"); intLoopBackC.ipx.addSC("access-group", "Apply an access list to inbound or outbound packets"); intLoopBackC.ipx.addSC("accounting", "Enable IPX accounting on this interface"); intLoopBackC.ipx.addSC("advertise-default-route-only", "Only advertise the IPX/RIP default route out onto this network"); intLoopBackC.ipx.addSC("bandwidth-percent", "Set EIGRP bandwidth limit"); intLoopBackC.ipx.addSC("compression", "Select IPX compression commands"); intLoopBackC.ipx.addSC("delay", "Set an IPX delay on the interface, in 'ticks'"); intLoopBackC.ipx.addSC("down", "Bring an IPX network administratively down"); intLoopBackC.ipx.addSC("encapsulation", "IPX encapsulation"); intLoopBackC.ipx.addSC("gns-reply-disable", "Disable Get Nearest Server replies on this interface"); intLoopBackC.ipx.addSC("gns-response-delay", "Delay in answering GNS on this interface"); intLoopBackC.ipx.addSC("hello-interval", "Configures IPX EIGRP hello interval"); intLoopBackC.ipx.addSC("helper-address", "Forward broadcasts to a specific address"); intLoopBackC.ipx.addSC("helper-list", "Filter helpered IPX packets on input"); intLoopBackC.ipx.addSC("hold-down", "Configures IPX EIGRP routes hold down time"); intLoopBackC.ipx.addSC("hold-time", "Configures IPX EIGRP hold time"); intLoopBackC.ipx.addSC("input-network-filter", "Filter incoming routing updates"); intLoopBackC.ipx.addSC("input-sap-filter", "Filter services learned from the Service Advertising Protocol"); intLoopBackC.ipx.addSC("ipxwan", "Configure IPXWAN on this interface"); intLoopBackC.ipx.addSC("link-delay", "Set an IPX link delay on the interface, in microseconds"); intLoopBackC.ipx.addSC("linkup-request", "Send RIP/SAP requests when interface comes up"); intLoopBackC.ipx.addSC("netbios", "Setup IPX NetBIOS filters and caching on this interface"); intLoopBackC.ipx.addSC("network", "Assign an IPX network & enable IPX routing"); intLoopBackC.ipx.addSC("nlsp", "Select NLSP commands"); intLoopBackC.ipx.addSC("output-ggs-filter", "Filter services reported in response to Get General Service"); intLoopBackC.ipx.addSC("output-gns-filter", "Filter services reported in response to Get Nearest Server"); intLoopBackC.ipx.addSC("output-network-filter", "Filter outgoing routing updates"); intLoopBackC.ipx.addSC("output-rip-delay", "Interpacket delay for RIP updates"); intLoopBackC.ipx.addSC("output-sap-delay", "Interpacket delay for SAP updates"); intLoopBackC.ipx.addSC("output-sap-filter", "Filter services learned from the Service Advertising Protocol"); intLoopBackC.ipx.addSC("pad-process-switched-packets", "Pad odd-length packets on output (process-switched only)"); intLoopBackC.ipx.addSC("rip-max-packetsize", "Maximum size of RIP packets being sent on interface"); intLoopBackC.ipx.addSC("rip-multiplier", "Multiple of RIP update interval for aging of RIP routes"); intLoopBackC.ipx.addSC("rip-response-delay", "Delay in answering RIP on this interface"); intLoopBackC.ipx.addSC("route-cache", "Enable fast switching"); intLoopBackC.ipx.addSC("router-filter", "Filter sources of routing updates"); intLoopBackC.ipx.addSC("router-sap-filter", "Select source router and service type of SAP updates"); intLoopBackC.ipx.addSC("sap-helper", "Forward SAP broadcasts queries to a specific address"); intLoopBackC.ipx.addSC("sap-incremental", "Send incremental SAP updates - for IPX EIGRP networks only"); intLoopBackC.ipx.addSC("sap-max-packetsize", "Maximum size of SAP packets being sent on interface"); intLoopBackC.ipx.addSC("sap-multiplier", "Multiple of SAP update interval for aging of SAP routes"); intLoopBackC.ipx.addSC("split-horizon", "Perform split horizon"); intLoopBackC.ipx.addSC("spx-idle-time", "Set an SPX idle time on the interface, in seconds"); intLoopBackC.ipx.addSC("spx-spoof", "Spoof SPX keepalives packets"); intLoopBackC.ipx.addSC("throughput", "Set IPX link throughput in bit per second"); intLoopBackC.ipx.addSC("triggered-rip-delay", "Interpacket delay for triggered RIP updates (override output-rip-delay for triggered updates only)"); intLoopBackC.ipx.addSC("triggered-rip-holddown", "Initial holddown for triggered RIP updates"); intLoopBackC.ipx.addSC("triggered-sap-delay", "Interpacket delay for triggered SAP updates (override output-rip-delay for triggered updates only)"); intLoopBackC.ipx.addSC("triggered-sap-holddown", "Initial holddown for triggered SAP updates"); intLoopBackC.ipx.addSC("type-20-propagation", "Forward IPX type 20 propagation packets"); intLoopBackC.ipx.addSC("update", "RIP/SAP update commands"); intLoopBackC.ipx.addSC("watchdog", "Special handling for IPX server watchdog packets"); intLoopBackC.addSC("isis", "IS-IS commands"); intLoopBackC.isis.addSC("adjacency-filter", "Filter IS-IS adjacencies"); intLoopBackC.isis.addSC("circuit-type", "Configure circuit type for interface"); intLoopBackC.isis.addSC("csnp-interval", "Set CSNP interval in seconds"); intLoopBackC.isis.addSC("hello", "Add padding to IS-IS hello packets"); intLoopBackC.isis.addSC("hello-interval", "Set Hello interval in seconds"); intLoopBackC.isis.addSC("hello-multiplier", "Set multiplier for Hello holding time"); intLoopBackC.isis.addSC("lsp-interval", "Set LSP transmission interval"); intLoopBackC.isis.addSC("mesh-group", "Set ISIS mesh group"); intLoopBackC.isis.addSC("metric", "Configure the metric for interface"); intLoopBackC.isis.addSC("password", "Configure the authentication password for interface"); intLoopBackC.isis.addSC("priority", "Set priority for Designated Router election"); intLoopBackC.isis.addSC("retransmit-interval", "Set per-LSP retransmission interval"); intLoopBackC.isis.addSC("retransmit-throttle-interval", "Set interface LSP retransmission interval"); intLoopBackC.isis.addSC("three-way-handshake", "Select Cisco or IETF three-way handshake"); intLoopBackC.addSC("iso-igrp", "ISO-IGRP interface subcommands"); intLoopBackC["iso-igrp"].addSC("adjacency-filter", "Filter ISO-IGRP adjacencies"); intLoopBackC.addSC("keepalive", "Enable keepalive"); intLoopBackC.keepalive.addSC("<0-32767>", "Keepalive period (default 10 seconds)"); intLoopBackC.addSC("lan-name", "LAN Name command"); intLoopBackC["lan-name"].addSC("WORD", "Up to 8 characters lan name"); intLoopBackC.addSC("lat", "LAT commands"); intLoopBackC.lat.addSC("enabled", "Enable LAT protocol translation"); intLoopBackC.lat.addSC("host", "Statically define LAT services"); intLoopBackC.addSC("line-power", "Provide power on the line."); intLoopBackC.addSC("llc2", "LLC2 Interface Subcommands"); intLoopBackC.llc2.addSC("N2", "Number of times router should retry various operations"); intLoopBackC.llc2.addSC("ack-delay-time", "Max time the router allows incoming I-frames to stay unacknowledged"); intLoopBackC.llc2.addSC("ack-max", "Max number of I-frames received before an acknowledgment must be sent"); intLoopBackC.llc2.addSC("adm-timer-value", "How long router waits in ADM before giving up."); intLoopBackC.llc2.addSC("dynwind", "Congestion control with dynamic window"); intLoopBackC.llc2.addSC("idle-time", "Frequency of polls during periods of idle traffic"); intLoopBackC.llc2.addSC("local-window", "Max number of I-frames to send before waiting for an acknowledgment"); intLoopBackC.llc2.addSC("t1-time", "How long router waits for an acknowledgment to transmitted I-frames"); intLoopBackC.llc2.addSC("tbusy-time", "Amount of time router waits while the other LLC2 station is in a busy state before attempting to poll the remote station"); intLoopBackC.llc2.addSC("tpf-time", "Amount of time router waits for a final response to a poll frame before re-sending the original poll frame"); intLoopBackC.llc2.addSC("trej-time", "Amount of time router waits for a resend of a rejected frame before sending the reject command"); intLoopBackC.llc2.addSC("txq-max", "Queue for holding llc2 information frames"); intLoopBackC.llc2.addSC("xid-neg-val-time", "Frequency of exchange of identification (XID)"); intLoopBackC.llc2.addSC("xid-retry-time", "How long router waits for reply to XID"); intLoopBackC.addSC("load-interval", "Specify interval for load calculation for an interface"); intLoopBackC["load-interval"].addSC("<30-600>", "Load interval delay in seconds"); intLoopBackC.addSC("locaddr-priority", "Assign a priority group"); intLoopBackC["locaddr-priority"].addSC("<1-10>", "Priority list number"); intLoopBackC.addSC("logging", "Configure logging for interface"); intLoopBackC.logging.addSC("event", "Interface events"); intLoopBackC.addSC("max-reserved-bandwidth", "Maximum Reservable Bandwidth on an Interface"); intLoopBackC["max-reserved-bandwidth"].addSC("<1-100>", "Max. reservable bandwidth as % of interface bandwidth"); intLoopBackC.addSC("mls", "mls sub/interface commands"); intLoopBackC.mls.addSC("rp", "rp"); intLoopBackC.addSC("mpls", "Configure MPLS interface parameters"); intLoopBackC.mpls.addSC("ip", "Configure dynamic MPLS forwarding for IP"); intLoopBackC.mpls.addSC("mtu", "Set tag switching Maximum Transmission Unit"); intLoopBackC.mpls.addSC("netflow", "Configure Egress Netflow Accounting"); intLoopBackC.mpls.addSC("traffic-eng", "Configure Traffic Engineering parameters"); intLoopBackC.addSC("mpoa", "MPOA interface configuration commands"); intLoopBackC.addSC("mtu", "Set the interface Maximum Transmission Unit (MTU)"); intLoopBackC.mtu.addSC("<64-18024>", "MTU size in bytes"); intLoopBackC.addSC("multilink-group", "Put interface in a multilink bundle"); intLoopBackC["multilink-group"].addSC("<1-2147483647>", "Multilink group number"); intLoopBackC.addSC("netbios", "Use a defined NETBIOS access list or enable name-caching"); intLoopBackC.netbios.addSC("enable-name-cache", "Enable NETBIOS name cache on this interface"); intLoopBackC.netbios.addSC("input-access-filter", "Access list filter on incoming messages"); intLoopBackC.netbios.addSC("output-access-filter", "Access list filter on outgoing messages"); intLoopBackC.addSC("network-clock-priority", "Configure clock source priority"); intLoopBackC["network-clock-priority"].addSC("high", "Recovered clock from line"); intLoopBackC["network-clock-priority"].addSC("low", "Used implicitly loop-timed clock"); intLoopBackC.addSC("no", "Negate a command or set its defaults"); intLoopBackC.no.addSC("access-expression", "Build a bridge boolean access expression"); intLoopBackC.no.addSC("apollo", "Apollo interface subcommands"); intLoopBackC.no.addSC("appletalk", "Appletalk interface subcommands"); intLoopBackC.no.addSC("arp", "Set arp type (arpa, probe, snap) or timeout"); intLoopBackC.no.addSC("backup", "Modify backup parameters"); intLoopBackC.no.addSC("bandwidth", "Set bandwidth informational parameter"); intLoopBackC.no.addSC("bridge-group", "Transparent bridging interface parameters"); intLoopBackC.no.addSC("carrier-delay", "Specify delay for interface transitions"); intLoopBackC.no.addSC("cdp", "CDP interface subcommands"); intLoopBackC.no.addSC("clns", "CLNS interface subcommands"); intLoopBackC.no.addSC("crypto", "Encryption/Decryption commands"); intLoopBackC.no.addSC("decnet", "Interface DECnet config commands"); intLoopBackC.no.addSC("delay", "Specify interface throughput delay"); intLoopBackC.no.addSC("description", "Interface specific description"); intLoopBackC.no.addSC("dspu", "Down Stream PU"); intLoopBackC.no.addSC("fras", "DLC Switch Interface Command"); intLoopBackC.no.addSC("h323-gateway", "Configure H323 Gateway"); intLoopBackC.no.addSC("hold-queue", "Set hold queue depth"); intLoopBackC.no.addSC("ip", "Interface Internet Protocol config commands"); intLoopBackC.no.ip.addSC("access-group", "Specify access control for packets"); intLoopBackC.no.ip.addSC("accounting", "Enable IP accounting on this interface"); intLoopBackC.no.ip.addSC("address", "Set the IP address of an interface"); intLoopBackC.no.ip.address.addSC("A.B.C.D", "IP address"); intLoopBackC.no.ip.address["A.B.C.D"].addSC("A.B.C.D", "IP subnet mask"); intLoopBackC.no.ip.address["A.B.C.D"]["A.B.C.D"].addSC("secondary", "Make this IP address a secondary address"); intLoopBackC.no.ip.addSC("authentication", "authentication subcommands"); intLoopBackC.no.ip.addSC("bandwidth-percent", "Set EIGRP bandwidth limit"); intLoopBackC.no.ip.addSC("bgp", "BGP interface commands"); intLoopBackC.no.ip.addSC("broadcast-address", "Set the broadcast address of an interface"); intLoopBackC.no.ip.addSC("cef", "Cisco Express Fowarding interface commands"); intLoopBackC.no.ip.addSC("cgmp", "Enable/disable CGMP"); intLoopBackC.no.ip.addSC("dhcp", "Configure DHCP parameters for this interface"); intLoopBackC.no.ip.addSC("directed-broadcast", "Enable forwarding of directed broadcasts"); intLoopBackC.no.ip.addSC("dvmrp", "DVMRP interface commands"); intLoopBackC.no.ip.addSC("hello-interval", "Configures IP-EIGRP hello interval"); intLoopBackC.no.ip.addSC("helper-address", "Specify a destination address for UDP broadcasts"); intLoopBackC.no.ip.addSC("hold-time", "Configures IP-EIGRP hold time"); intLoopBackC.no.ip.addSC("igmp", "IGMP interface commands"); intLoopBackC.no.ip.addSC("irdp", "ICMP Router Discovery Protocol"); intLoopBackC.no.ip.addSC("load-sharing", "Style of load sharing"); intLoopBackC.no.ip.addSC("mask-reply", "Enable sending ICMP Mask Reply messages"); intLoopBackC.no.ip.addSC("mobile", "Mobile IP support"); intLoopBackC.no.ip.addSC("mrm", "Configure IP Multicast Routing Monitor tester"); intLoopBackC.no.ip.addSC("mroute-cache", "Enable switching cache for incoming multicast packets"); intLoopBackC.no.ip.addSC("mtu", "Set IP Maximum Transmission Unit"); intLoopBackC.no.ip.addSC("multicast", "IP multicast interface commands"); intLoopBackC.no.ip.addSC("nat", "NAT interface commands"); intLoopBackC.no.ip.addSC("nbar", "Network-Based Application Recognition"); intLoopBackC.no.ip.addSC("ospf", "OSPF interface commands"); intLoopBackC.no.ip.addSC("pgm", "PGM Reliable Transport Protocol"); intLoopBackC.no.ip.addSC("pim", "PIM interface commands"); intLoopBackC.no.ip.addSC("policy", "Enable policy routing"); intLoopBackC.no.ip.addSC("probe", "Enable HP Probe support"); intLoopBackC.no.ip.addSC("proxy-arp", "Enable proxy ARP"); intLoopBackC.no.ip.addSC("rarp-server", "Enable RARP server for static arp entries"); intLoopBackC.no.ip.addSC("redirects", "Enable sending ICMP Redirect messages"); intLoopBackC.no.ip.addSC("rgmp", "Enable/disable RGMP"); intLoopBackC.no.ip.addSC("rip", "Router Information Protocol"); intLoopBackC.no.ip.addSC("route-cache", "Enable fast-switching cache for outgoing packets"); intLoopBackC.no.ip.addSC("router", "IP router interface commands"); intLoopBackC.no.ip.addSC("rsvp", "RSVP interface commands"); intLoopBackC.no.ip.addSC("rtp", "RTP parameters"); intLoopBackC.no.ip.addSC("sap", "Session Announcement Protocol interface commands"); intLoopBackC.no.ip.addSC("security", "DDN IP Security Option"); intLoopBackC.no.ip.addSC("split-horizon", "Perform split horizon"); intLoopBackC.no.ip.addSC("summary-address", "Perform address summarization"); intLoopBackC.no.ip.addSC("tcp", "TCP header compression parameters"); intLoopBackC.no.ip.addSC("unnumbered", "Enable IP processing without an explicit address"); intLoopBackC.no.ip.addSC("unreachables", "Enable sending ICMP Unreachable messages"); intLoopBackC.no.ip.addSC("urd", "Configure URL Rendezvousing"); intLoopBackC.no.ip.addSC("verify", "Enable per packet validation"); intLoopBackC.no.ip.addSC("vrf", "VPN Routing/Forwarding parameters on the interface"); intLoopBackC.no.ip.addSC("wccp", "WCCP interface commands"); intLoopBackC.no.addSC("ipx", "Novell/IPX interface subcommands"); intLoopBackC.no.addSC("isis", "IS-IS commands"); intLoopBackC.no.addSC("iso-igrp", "ISO-IGRP interface subcommands"); intLoopBackC.no.addSC("keepalive", "Enable keepalive"); intLoopBackC.no.addSC("lan-name", "LAN Name command"); intLoopBackC.no.addSC("lat", "LAT commands"); intLoopBackC.no.addSC("line-power", "Provide power on the line."); intLoopBackC.no.addSC("llc2", "LLC2 Interface Subcommands"); intLoopBackC.no.addSC("load-interval", "Specify interval for load calculation for an interface"); intLoopBackC.no.addSC("locaddr-priority", "Assign a priority group"); intLoopBackC.no.addSC("logging", "Configure logging for interface"); intLoopBackC.no.addSC("max-reserved-bandwidth", "Maximum Reservable Bandwidth on an Interface"); intLoopBackC.no.addSC("mls", "mls sub/interface commands"); intLoopBackC.no.addSC("mpls", "Configure MPLS interface parameters"); intLoopBackC.no.addSC("mpoa", "MPOA interface configuration commands"); intLoopBackC.no.addSC("mtu", "Set the interface Maximum Transmission Unit (MTU)"); intLoopBackC.no.addSC("multilink-group", "Put interface in a multilink bundle"); intLoopBackC.no.addSC("netbios", "Use a defined NETBIOS access list or enable name-caching"); intLoopBackC.no.addSC("network-clock-priority", "Configure clock source priority"); intLoopBackC.addSC("ntp", "Configure NTP"); intLoopBackC.ntp.addSC("broadcast", "Configure NTP broadcast service"); intLoopBackC.ntp.addSC("disable", "Disable NTP"); intLoopBackC.ntp.addSC("multicast", "Configure NTP multicast service"); intLoopBackC.addSC("rate-limit", "Rate Limit"); intLoopBackC["rate-limit"].addSC("input", "Rate limit on input"); intLoopBackC["rate-limit"].addSC("output", "Rate limit on output"); intLoopBackC.addSC("sap-priority", "Assign a priority group"); intLoopBackC["sap-priority"].addSC("<1-10>", "Priority list number"); intLoopBackC.addSC("service-policy", "Configure QoS Service Policy"); intLoopBackC["service-policy"].addSC("history", "Keep history of QoS metrics"); intLoopBackC["service-policy"].addSC("input", "Assign policy-map to the input of an interface"); intLoopBackC["service-policy"].addSC("output", "Assign policy-map to the output of an interface"); intLoopBackC.addSC("shutdown", "Shutdown the selected interface"); intLoopBackC.addSC("smrp", "Simple Multicast Routing Protocol interface subcommands"); intLoopBackC.smrp.addSC("mroute-cache", "Enable SMRP route cache"); intLoopBackC.smrp.addSC("protocol", "Specify network layer service protocol"); intLoopBackC.addSC("sna", "SNA pu configuration"); intLoopBackC.sna.addSC("enable-host", "SNA Enable Host command"); intLoopBackC.sna.addSC("start", "SNA Start command"); intLoopBackC.addSC("snapshot", "Configure snapshot support on the interface"); intLoopBackC.snapshot.addSC("client", "Enable client control of Snapshot routing"); intLoopBackC.snapshot.addSC("server", "Send routing updates out this link when updates are received"); intLoopBackC.addSC("snmp", "Modify SNMP interface parameters"); intLoopBackC.snmp.addSC("ifindex", "Persist ifindex for the interface"); intLoopBackC.snmp.addSC("trap", "Allow a specific SNMP trap"); intLoopBackC.addSC("tag-switching", "Tag Switching interface configuration commands"); intLoopBackC["tag-switching"].addSC("ip", "Configure IP dynamic Tag Switching"); intLoopBackC["tag-switching"].addSC("mtu", "Set tag switching Maximum Transmission Unit"); intLoopBackC.addSC("tarp", "TARP interface subcommands"); intLoopBackC.tarp.addSC("enable", "Enable TARP on interface"); intLoopBackC.tarp.addSC("propagate", "Enable propagation of TARP PDU's out on this interface"); intLoopBackC.tarp.addSC("split-horizon", "Enable split horizon for TARP propagation on this interface"); intLoopBackC.addSC("timeout", "Define timeout values for this interface"); intLoopBackC.timeout.addSC("absolute", "Define session timeout value for this interface"); intLoopBackC.addSC("transmit-interface", "Assign a transmit interface to a receive-only interface"); intLoopBackC["transmit-interface"].addSC("Async", "Async interface"); intLoopBackC["transmit-interface"].addSC("BRI", "ISDN Basic Rate Interface"); intLoopBackC["transmit-interface"].addSC("CTunnel", "CTunnel interface"); intLoopBackC["transmit-interface"].addSC("Dialer", "Dialer interface"); intLoopBackC["transmit-interface"].addSC("Ethernet", "IEEE 802.3"); intLoopBackC["transmit-interface"].addSC("Group-Async", "Async Group interface"); intLoopBackC["transmit-interface"].addSC("Lex", "Lex interface"); intLoopBackC["transmit-interface"].addSC("Loopback", "Loopback interface"); intLoopBackC["transmit-interface"].addSC("Multilink", "Multilink-group interface"); intLoopBackC["transmit-interface"].addSC("Null", "Null interface"); intLoopBackC["transmit-interface"].addSC("Serial", "Serial"); intLoopBackC["transmit-interface"].addSC("Tunnel", "Tunnel interface"); intLoopBackC["transmit-interface"].addSC("Vif", "PGM Multicast Host interface"); intLoopBackC["transmit-interface"].addSC("Virtual-Template", "Virtual Template interface"); intLoopBackC["transmit-interface"].addSC("Virtual-TokenRing", "Virtual TokenRing"); intLoopBackC.addSC("trunk-group", "Configure interface to be in a trunk group"); intLoopBackC["trunk-group"].addSC("<1-1000>", "Trunk group number"); intLoopBackC.addSC("tx-ring-limit", "Configure PA level transmit ring limit"); intLoopBackC["tx-ring-limit"].addSC("<1-32767>", "Number (ring limit)"); intLoopBackC.addSC("vines", "VINES interface subcommands"); intLoopBackC.vines.addSC("access-group", "Apply a VINES access list"); intLoopBackC.vines.addSC("arp-enable", "Supply VINES addresses to booting clients"); intLoopBackC.vines.addSC("encapsulation", "VINES encapsulation"); intLoopBackC.vines.addSC("input-network-filter", "Filter networks in received routing updates"); intLoopBackC.vines.addSC("input-router-filter", "Filter source of received routing updates"); intLoopBackC.vines.addSC("metric", "VINES processing on the selected interface"); intLoopBackC.vines.addSC("output-network-filter", "Filter networks sent in routing updates"); intLoopBackC.vines.addSC("propagate", "Ignore 'class' field during broadcast forwarding"); intLoopBackC.vines.addSC("redirect", "Set redirect interval"); intLoopBackC.vines.addSC("route-cache", "Fast switch VINES packets out this interface"); intLoopBackC.vines.addSC("serverless", "The attached network has no Banyan server"); intLoopBackC.vines.addSC("split-horizon", "Split-horizon routing updates"); intLoopBackC.vines.addSC("update", "Set RTP update characteristics for this interface"); intLoopBackC.addSC("xns", "XNS interface subcommands"); intLoopBackC.xns.addSC("access-group", "Apply an access list to output packets"); intLoopBackC.xns.addSC("encapsulation", "Set encapsulation method for XNS packets"); intLoopBackC.xns.addSC("flood", "Flood XNS packets"); intLoopBackC.xns.addSC("hear-rip", "Listen to RIP updates"); intLoopBackC.xns.addSC("helper-address", "Forward broadcasts to a specific address"); intLoopBackC.xns.addSC("input-network-filter", "Filter incoming routing updates"); intLoopBackC.xns.addSC("network", "Assign an XNS network & enable XNS routing"); intLoopBackC.xns.addSC("output-network-filter", "Filter outgoing routing updates"); intLoopBackC.xns.addSC("route-cache", "Enable fast switching"); intLoopBackC.xns.addSC("router-filter", "Filter sources of routing updates"); intLoopBackC.xns.addSC("update-time", "Set XNS routing update timer");