SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 01

www.cobra.it

MAKE

VOLVO

MOD.

S 40 *

YEAR

04 �ął PETROL

DIESEL

X

* Models with original equipment keyless entry system.

ALARM/SIREN

Position the compact alarms and the sirens on the support of the shock absorber, in the POSITION

engine compartment, passenger’s side.

Pass the cables using the original fairlead located behind the passenger’s side glove compartment.

CENTRAL UNIT POSITION

Position the modular sistems and the modules under the dashboard, passenger’s side.

POWER SUPPLY

+30: connect to the 2 mm2 RED wire located in the wiring harness coming out of the green connector, in the fuse box.

-31: connect to one of the ground terminals located behind the left lateral bulkhead, driver’s side.

IGNITION WIRE

+15/54: connect to the WHITE/GREEN wire, in the wiring harness coming out of the connector of the ignition key.

DIRECTION INDICATORS

Connect to the wires: LIGHT BLUE and LIGHT BLUE/RED in the brown connector located in the lower part of the fuse box.

ACTIVAT./DEACTIVATION

Connections antitheft/vehicle CONTROLS

Art. 3800

Vehicle

Position

YELLOW/BLACK

WHITE/BLACK

Connector central of the electric windows motor GREY/BLACK

YELLOW/BLACK

Connector central of the electric windows motor VIOLET

YELLOW/BLACK

Original open/close push-button ORANGE

RED/BLACK

Original open/close push-button VIOLET/WHITE

Ground

Car body

ORANGE/WHITE

positive

Supply in the fuse box

The connector of the window motor central is located inside the driver’s side door.

Refer to the �śC” diagram in the dedicated installations manual inside the kit of the antitheft.

IMMOBILISATION POINT

Gasoil pump

Cut the WHITE/GREEN wire, at the position nr.3, in the wiring harness comig out of the connector of the ignition key.

STARTER

+50: Cut the GREY/BLACK wire, at the position nr.2, in the wiring harness coming out of the connector of the ignition key.

BONNET SWITCH

Install an additional switch on the headlamp support plate, driver’s side.

DOORS SWITCH

Connect to the BLACK wire in the wiring harness coming out of the connector of the lamp located under the driver’s side dashboard.

BOOT SWITCH

Connect to the BLACK/LIGHT BLUE wire in the wiring harness coming out of the connector of the boot lamp.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed vos4004gbdtr1.doc

as per the instructions given on the product installation manual.