How to Use the KM Integrated Test Chart Mar. 2004 Education & Documentation Division Training Department 2
How to Use the KM Integrated Test Chart
1. Checks to be Made Using the New Test Chart
No. Purpose
To check for gradation.
1
To check for incorrect registration and void image on the leading and trailing edges in the
2
sub scanning direction
To check the position at which to start writing the image and void image in the main scan-
3
ning direction
To check for distortion and zoom ratios
4
To check for copy image density and fusing performance
5
To check zoom ratios, jitter, and crooked image in the sub scanning direction
6
To check for resolution of the copy image
7
To check for unevenness and streaks in the sub scanning direction
8
To check zoom ratios in the main scanning direction
9
To check solid black including faint image on edges
10
6 6
2
5
5
7 7
6.3 6.3
5.6 5.6
6.3 6.3 5.0 5.0
5.6 5.6 4.5 4.5
5.0 5.0 4.0 4.0
4.5 4.5
4.0 4.0
3.6 3.6
3.2 3.2
1 3.6 1 3.6 1 2.8 2.8
3.2 3.2
2.8 2.8 2.5 2.5
2.5 2.5 2.2 2.2
2.2 2.2 2.0 1 2.0
2.0 1 2.0
2 8pt.ABCDEFGHIJKLabcdefghijklm1234567890
2 8pt.ABCDEFGHIJKLabcdefghijklm1234567890
9pt.ABCDEFGHIJKabcdefghijkl12345678
9pt.ABCDEFGHIJKabcdefghijkl12345678
10pt.ABCDEFGHIJabcdefghijk1234567
10pt.ABCDEFGHIJabcdefghijk1234567 3
3 12pt.ABCDEFGabcdefg123456789
12pt.ABCDEFGabcdefg123456789
14pt.ABCDEFabcdefg1234567
14pt.ABCDEFabcdefg1234567 4
4
18pt.ABCDEabcdef12345
18pt. ABCDEabcdef12345
5
5 8pt.
8pt.
9pt.
9pt. 6
3 3 10pt.
6
10pt.
4 4 12pt.
12pt.
7
7 14pt.
14pt.
18pt.
8
18pt.
8
9
9
4.8
4.8
10
10
7
6.3
5.6
6.3 5.0
5.6 4.5
5.0 4.0
4.5 5
4.0
3.6
5 3.2
3.6
3.2 2.8
10
2.8 2.5
10
2.5 2.2
2.2 2.0 40
2.0 40
8
5 5 5
al plates and gen stment and runs job no blanket wash your office offset to cut copying costs with this can on automatic changeover from paper masters and automated short rur imply makes desti
al plates and gen stment and runs job no blanket wash your office offset to cut copying costs with this can on automatic changeover from paper masters and automated short rur imply makes desti ts an office mach n from a pound of ink copy can be run on both sides of the sheet with multiple colors of on a master turning on the machine and running off the copies its not many as copies c
ts an office mach n from a pound of ink copy can be run on both sides of the sheet with multiple colors of on a master turning on the machine and running off the copies its not many as copies c while and after many sizes of materials on almost all kinds of stock rag bond card stock smooth finish adding new versatility speed and efficiency mated run a choice of optior send out you can
while and after many sizes of materials on almost all kinds of stock rag bond card stock smooth finish adding new versatility speed and efficiency mated run a choice of optior send out you can rol over the ink en changes are nccessary now advanced fingertip programming single lever action control the inking and dampening system permits the operator to exercise pre uable printed mat
rol over the ink en changes are nccessary now advanced fingertip programming single lever action control the inking and dampening system permits the operator to exercise pre uable printed mat ickness quality c rating cycle greatly reduces repetitive shortrun duplicating time for example when used and impression cylinders that are selfadjusting for changes is paper or r a simplifies the e
ickness quality c rating cycle greatly reduces repetitive shortrun duplicating time for example when used and impression cylinders that are selfadjusting for changes is paper or r a simplifies the e ut tools a positive anually control even though the machine is running on automatic changeover from pater to scales on paper feed that match scales on rceiving tray of machine compared to a sta
ut tools a positive anually control even though the machine is running on automatic changeover from pater to scales on paper feed that match scales on rceiving tray of machine compared to a sta antly longer than t runs to metal plates and general duplicating takes only a matter of seconds the machine includes two ductor rollers and five distributor rollers offset rollers las isters and automa
antly longer than t runs to metal plates and general duplicating takes only a matter of seconds the machine includes two ductor rollers and five distributor rollers offset rollers las isters and automa you with copy qu s its not a press its an office machine heres practical automation the wide image model nylon for longer wear people who arent acquaited you want it to be it p and running off t
you with copy qu s its not a press its an office machine heres practical automation the wide image model nylon for longer wear people who arent acquaited you want it to be it p and running off t ets you and impre a choise of options before while and after copies are run allows the operator to adjust the quality aquamatic control not only assures sharp clean first copies b nd efficiency to m
ets you and impre a choise of options before while and after copies are run allows the operator to adjust the quality aquamatic control not only assures sharp clean first copies b nd efficiency to m tically separate w o metal plate and from shortrun prese the inking and dampening system permits the three with varying weigts of paper no special adjustments needed cylinders ation from pater t
tically separate w o metal plate and from shortrun prese the inking and dampening system permits the three with varying weigts of paper no special adjustments needed cylinders ation from pater t
9 nder constant con ollers are large size to insure even distribution of ink the two form rollers are of different machine all without tools a positive vacuum paper feed system keeps plate the three osd
nder constant con ollers are large size to insure even distribution of ink the two form rollers are of different machine all without tools a positive vacuum paper feed system keeps plate the three osd t cylinders to con rs soft rollers are made of polyurethane to resist chemical attack most hard rollers are for to gripper master and impression cylinders automatically adjust to th longer then ordin
t cylinders to con rs soft rollers are made of polyurethane to resist chemical attack most hard rollers are for to gripper master and impression cylinders automatically adjust to th longer then ordin
ABCDEFGHIJKLMNOPQRST
7 7
ABCDEFGHIJKLMNOPQRST MODEL :
7 7
ABCDEFGHIJKL
MODEL : 12 12
ABCDEFGHIJKL
12 12 MACHINE S/N :
MACHINE S/N :
20 20 ABCDEFG
DATE :
20 20 ABCDEFG
DATE :
EXP. : AUTO MANUAL( )
4 EXP. : AUTO MANUAL( ) 4
ABCDEFGHIJKLMNOPQRST
3 3 7 TOTAL COUNTER : 7
ABCDEFGHIJKLMNOPQRST
7 TOTAL COUNTER : 7
ABCDEFGHIJKL
12 12
ABCDEFGHIJKL MODE : Text Photo Text / Photo
12 12
MODE : Text Photo Text / Photo
20 ABCDEFG Printing Direction : 20
20 ABCDEFG Printing Direction : 20
Original-Set Direction :
Original-Set Direction :
7 7
OTHERS :
6.3 6.3
OTHERS : 5.6 5.6
6.3 6.3 5.0 5.0
5.6 5.6 4.5 4.5
5.0 5.0 4.0 4.0
4.5 4.5
4.0 4.0
3.6 3.6
3.2 3.2
3.6 3.6
3.2 3.2 2.8 2.8
2.8 2.8 2.5 2.5
2.5 2.5 2.2 2.2
2.2 2.2 2.0 2.0
2.0 2.0
PART NO. 4034-7940-01
PART NO. 4034-7940-01 10 (TEST CHART NO. KMTC-001-01) 10
(TEST CHART NO. KMTC-001-01)
Printed in Japan
Printed in Japan
2
5 5

14

14
R1.5
R1.5
C1.5
C1.5
Education & Documentation Division Training Department How to Use the KM Integrated Test Chart Mar. 2004
2. Check Procedures
Check Procedures
1
" Check the gray scale on the copy for the degree of fog.
1
2
Check Procedures
2
" Check how much the line drawn at a point 20 mm from the leading edge devi-
ates in mm on the copy.
Check Procedures
" Check how much the line drawn at a point 20 mm from each of the right and left
3
edges deviates in mm on the copy.
" Check how much there is a void image in mm from each of the right and left
edges.
Check Procedures
10pt.ABCDEFGHIJabcdefghijk1234567
3
12pt.ABCDEFGabcdefg123456789
14pt.ABCDEFabcdefg1234567
4
18pt.ABCDEabcdef12345
5
8pt.
9pt.
P2
6
P1 10pt.
4 4 " Measure the dimension between P1 and P4, and that
12pt.
7
14pt.
18pt.
8
between P2 and P3, on the image to be measured,
9
4.8
10
thereby checking for the amount of distortion.
6.3 " Measure the dimension between P1 and P2 on the
5.6
5.0
4.5
4.0
5
3.6
3.2
2.8
10
2.5
2.2
image to be measured, and that between P1 and P2
2.0 40
on the test chart, thereby determining the horizontal
al plates and gen stment and runs job no blanket wash your office offset to cut copying costs with this can on automatic changeover from paper masters and automated short rur imply makes desti zoom ratio.
ts an office mach n from a pound of ink copy can be run on both sides of the sheet with multiple colors of on a master turning on the machine and running off the copies its not many as copies c
while and after many sizes of materials on almost all kinds of stock rag bond card stock smooth finish adding new versatility speed and efficiency mated run a choice of optior send out you can
rol over the ink en changes are nccessary now advanced fingertip programming single lever action control the inking and dampening system permits the operator to exercise pre uable printed mat
ickness quality c rating cycle greatly reduces repetitive shortrun duplicating time for example when used and impression cylinders that are selfadjusting for changes is paper or r a simplifies the e
ut tools a positive anually control even though the machine is running on automatic changeover from pater to scales on paper feed that match scales on rceiving tray of machine compared to a sta
antly longer than t runs to metal plates and general duplicating takes only a matter of seconds the machine includes two ductor rollers and five distributor rollers offset rollers las isters and automa " Measure the dimension between P1 and P3 on the
you with copy qu s its not a press its an office machine heres practical automation the wide image model nylon for longer wear people who arent acquaited you want it to be it p and running off t
ets you and impre a choise of options before while and after copies are run allows the operator to adjust the quality aquamatic control not only assures sharp clean first copies b nd efficiency to m
tically separate w o metal plate and from shortrun prese the inking and dampening system permits the three with varying weigts of paper no special adjustments needed cylinders ation from pater t
nder constant con ollers are large size to insure even distribution of ink the two form rollers are of different machine all without tools a positive vacuum paper feed system keeps plate the three osd
t cylinders to con rs soft rollers are made of polyurethane to resist chemical attack most hard rollers are for to gripper master and impression cylinders automatically adjust to th longer then ordin
image to be measured, and that between P1 and P3
on the test chart, thereby determining the vertical
ABCDEFGHIJKLMNOPQRST
7 7
MODEL :
ABCDEFGHIJKL
12 12
MACHINE S/N :
zoom ratio.
20 20 ABCDEFG
DATE :
4 EXP. : AUTO MANUAL( ) 4
ABCDEFGHIJKLMNOPQRST
7 TOTAL COUNTER : 7
ABCDEFGHIJKL
12 12
MODE : Text Photo Text / Photo
20 ABCDEFG Printing Direction : 20
Original-Set Direction :
P3 OTHERS : P4
6.3 6.3
5.6 5.6
5.0 5.0
4.5 4.5
4.0 4.0
3.6 3.6

14
R1.5
C1.5
How to Use the KM Integrated Test Chart Mar. 2004 Education & Documentation Division Training Department 2
Check Procedures
5 5
" Check the seven points on the copy for good
5 5 5
image density.
" Check for fusing performance.
5 5
Check Procedures
" If a scale is not available, take measurement using this 1-mm grid
6
pattern.
" Determine jitter based on whether the 1-mm grid pattern lines are
properly reproduced.
" Check the lines in the sub scanning direction of the 1-mm grid pat-
tern for straightness.
Check Procedures
7
" Check how clearly and sharply the five black and white lines drawn
6.3
5.6
5.0
4.5
4.0
vertically and horizontally are reproduced with an appropriate image
3.6
3.2
2.8
density.
2.5
2.2
2.0
Check Procedures
" Check for white lines, white bands, black lines, black bands, uneven
8
image, and other image noise in the sub scanning direction.
" Check for black/white contrast.
Education & Documentation Division Training Department How to Use the KM Integrated Test Chart Mar. 2004
Check Procedures
9
" If a scale is not available, take measurement using this 1-mm grid
pattern.
Check Procedures
" Check the solid black on the copy.
10
" Check for possible faint image on front and rear, and right and left
edges.