subintBriC.addSC("appletalk", "Appletalk interface subcommands"); subintBriC.appletalk.addSC("access-group", "Apply an access list to inbound or outbound packets"); subintBriC.appletalk.addSC("address", "Set appletalk Phase 1 address"); subintBriC.appletalk.addSC("arp-timeout", "arp-timeout"); subintBriC.appletalk.addSC("cable-range", "Set appletalk Phase 2 address"); subintBriC.appletalk.addSC("discovery", "Reset discovery mode for new cable range discovery"); subintBriC.appletalk.addSC("distribute-list", "Filter networks from routing updates"); subintBriC.appletalk.addSC("free-trade-zone", "Enhanced security for one-way shared networks"); subintBriC.appletalk.addSC("getzonelist-filter", "Filter zone-list replies"); subintBriC.appletalk.addSC("glean-packets", "Glean AARP information from packets"); subintBriC.appletalk.addSC("protocol", "Select AppleTalk routing protocol"); subintBriC.appletalk.addSC("route-cache", "Enable appletalk route cache"); subintBriC.appletalk.addSC("rtmp-splithorizon", "Enable Split Horizon processing generating AT/RTMP updates"); subintBriC.appletalk.addSC("rtmp-stub", "Send only RTMP stubs, no routes in updates"); subintBriC.appletalk.addSC("send-rtmps", "Send Appletalk routing updates"); subintBriC.appletalk.addSC("zip-reply-filter", "Filter ZIP replies"); subintBriC.appletalk.addSC("zone", "Assign an appletalk zone name"); subintBriC.addSC("arp", "Set arp type (arpa, probe, snap) or timeout"); subintBriC.arp.addSC("frame-relay", "Enable ARP for a frame relay interface"); subintBriC.arp.addSC("timeout", "Set ARP cache timeout"); subintBriC.addSC("bandwidth", "Set bandwidth informational parameter"); subintBriC.bandwidth.addSC("<1-10000000>", "Bandwidth in kilobits"); subintBriC.addSC("bridge-group", "Transparent bridging interface parameters"); subintBriC["bridge-group"].addSC("<1-255>", "Assign an interface to a Bridge Group."); subintBriC.addSC("cdp", "CDP interface subcommands"); subintBriC.cdp.addSC("enable", "Enable CDP on interface"); subintBriC.addSC("clns", "CLNS interface subcommands"); subintBriC.clns.addSC("access-group", "Filter inbound or outbound CLNS traffic"); subintBriC.clns.addSC("adjacency-filter", "Filter adjacencies"); subintBriC.clns.addSC("checksum", "Enable checksum generation"); subintBriC.clns.addSC("cluster-alias", "Enable DECnet Phase V cluster aliasing"); subintBriC.clns.addSC("dec-compatible", "Received NSAPs do not contain N-selector octet"); subintBriC.clns.addSC("enable", "Enable CLNS and ES-IS routing on interface"); subintBriC.clns.addSC("erpdu-interval", "Minimum interval between ERPDUs"); subintBriC.clns.addSC("es-neighbor", "End system SNPA static mapping configuration"); subintBriC.clns.addSC("esct-time", "Suggested ES configuration time"); subintBriC.clns.addSC("is-neighbor", "Intermediate system SNPA static mapping configuration"); subintBriC.clns.addSC("mtu", "Set MTU packet size for interface"); subintBriC.clns.addSC("net", "Set the CLNS address for this interface"); subintBriC.clns.addSC("rdpdu-interval", "Define the minimum interval between Redirect PDUs"); subintBriC.clns.addSC("router", "Enable CLNS routing protocol on interface"); subintBriC.clns.addSC("send-erpdu", "Send error PDUs when an error is detected in a data PDU"); subintBriC.clns.addSC("send-rdpdu", "Send redirect PDUs to optimize routing"); subintBriC.clns.addSC("split-horizon", "Enable ISO-IGRP split horizon"); subintBriC.addSC("crypto", "Encryption/Decryption commands"); subintBriC.crypto.addSC("map", "Assign a Crypto Map"); subintBriC.crypto.map.addSC("WORD", "Crypto Map tag"); subintBriC.addSC("decnet", "Interface DECnet config commands"); subintBriC.decnet.addSC("<0-3>", "ATG network number"); subintBriC.decnet.addSC("access-group", "Set access control for outgoing packets"); subintBriC.decnet.addSC("cluster-holdtime", "Interval to hold PhaseIV VAX cluster adjacencies"); subintBriC.decnet.addSC("cost", "Set cost value for interface"); subintBriC.decnet.addSC("hello-timer", "Set interval between transmitted HELLO messages"); subintBriC.decnet.addSC("in-routing-filter", "Set up access control for incoming routing information"); subintBriC.decnet.addSC("out-routing-filter", "Set up access control for outgoing routing information"); subintBriC.decnet.addSC("router-priority", "Set priority for determining default router"); subintBriC.decnet.addSC("routing-timer", "Set interval between transmitted routing messages"); subintBriC.decnet.addSC("split-horizon", "Enable split horizon on interface"); subintBriC.addSC("default", "Set a command to its defaults"); subintBriC.addSC("delay", "Specify interface throughput delay"); subintBriC.delay.addSC("<1-16777215>", "Throughput delay (tens of microseconds)"); subintBriC.addSC("description", "Interface specific description"); subintBriC.description.addSC("LINE", "Up to 240 characters describing this interface"); subintBriC.addSC("dspu", "Down Stream PU"); subintBriC.dspu.addSC("enable-host", "DSPU Enable Host command"); subintBriC.dspu.addSC("enable-pu", "DSPU Enable Pu command"); subintBriC.dspu.addSC("start", "DSPU Start command"); subintBriC.addSC("dxi", "ATM-DXI configuration commands"); subintBriC.dxi.addSC("interface-dfa", "Define a DFA as part of a subinterface"); subintBriC.dxi.addSC("map", "Map a given VPI and VCI to a ATM-DXI DFA"); subintBriC.dxi.addSC("pvc", "define PVC attributes"); subintBriC.addSC("encapsulation", "Set encapsulation type for an interface"); subintBriC.encapsulation.addSC("sde", "IEEE 802.10 Virtual LAN - Secure Data Exchange"); subintBriC.addSC("exit", "Exit from interface configuration mode"); subintBriC.addSC("fras", "DLC Switch Interface Command"); subintBriC.fras.addSC("backup", "Setup backup route"); subintBriC.fras.addSC("ban", "RFC 1490 bridged 802.5"); subintBriC.fras.addSC("ddr-backup", "Setup backup route"); subintBriC.fras.addSC("map", "Set forwarding of frames"); subintBriC.addSC("ip", "Interface Internet Protocol config commands"); subintBriC.ip.addSC("access-group", "Specify access control for packets"); subintBriC.ip.addSC("accounting", "Enable IP accounting on this interface"); subintBriC.ip.addSC("address", "Set the IP address of an interface"); subintBriC.ip.address.addSC("A.B.C.D", "IP address"); subintBriC.ip.address["A.B.C.D"].addSC("A.B.C.D", "IP subnet mask"); subintBriC.ip.address["A.B.C.D"]["A.B.C.D"].addSC("secondary", "Make this IP address a secondary address"); subintBriC.ip.addSC("authentication", "authentication subcommands"); subintBriC.ip.addSC("bandwidth-percent", "Set EIGRP bandwidth limit"); subintBriC.ip["bandwidth-percent"].addSC("eigrp", "Enhanced Interior Gateway Routing Protocol (EIGRP)"); subintBriC.ip["bandwidth-percent"].eigrp.addSC("<1-65535>", "Autonomous system number"); subintBriC.ip["bandwidth-percent"].eigrp["<1-65535>"].addSC("<1-999999>", "Maximum bandwidth percentage that EIGRP may use"); subintBriC.ip.addSC("bgp", "BGP interface commands"); subintBriC.ip.addSC("broadcast-address", "Set the broadcast address of an interface"); subintBriC.ip.addSC("cef", "Cisco Express Fowarding interface commands"); subintBriC.ip.addSC("cgmp", "Enable/disable CGMP"); subintBriC.ip.addSC("dhcp", "Configure DHCP parameters for this interface"); subintBriC.ip.addSC("directed-broadcast", "Enable forwarding of directed broadcasts"); subintBriC.ip.addSC("dvmrp", "DVMRP interface commands"); subintBriC.ip.addSC("hello-interval", "Configures IP-EIGRP hello interval"); subintBriC.ip.addSC("helper-address", "Specify a destination address for UDP broadcasts"); subintBriC.ip.addSC("hold-time", "Configures IP-EIGRP hold time"); subintBriC.ip.addSC("igmp", "IGMP interface commands"); subintBriC.ip.addSC("irdp", "ICMP Router Discovery Protocol"); subintBriC.ip.addSC("load-sharing", "Style of load sharing"); subintBriC.ip.addSC("mask-reply", "Enable sending ICMP Mask Reply messages"); subintBriC.ip.addSC("mobile", "Mobile IP support"); subintBriC.ip.addSC("mrm", "Configure IP Multicast Routing Monitor tester"); subintBriC.ip.addSC("mroute-cache", "Enable switching cache for incoming multicast packets"); subintBriC.ip.addSC("mtu", "Set IP Maximum Transmission Unit"); subintBriC.ip.addSC("multicast", "IP multicast interface commands"); subintBriC.ip.addSC("nat", "NAT interface commands"); subintBriC.ip.nat.addSC("inside", "Inside interface for address translation"); subintBriC.ip.nat.addSC("outside", "Outside interface for address translation"); subintBriC.ip.addSC("nbar", "Network-Based Application Recognition"); subintBriC.ip.addSC("nhrp", "NHRP interface subcommands"); subintBriC.ip.addSC("ospf", "OSPF interface commands"); subintBriC.ip.ospf.addSC("authentication", "Enable authentication"); subintBriC.ip.ospf.addSC("authentication-key", "Authentication password (key)"); subintBriC.ip.ospf.addSC("cost", "Interface cost"); subintBriC.ip.ospf.addSC("database-filter", "Filter OSPF LSA during synchronization and flooding"); subintBriC.ip.ospf.addSC("dead-interval", "Interval after which a neighbor is declared dead"); subintBriC.ip.ospf["dead-interval"].addSC("<1-65535>", "Seconds"); subintBriC.ip.ospf.addSC("demand-circuit", "OSPF demand circuit"); subintBriC.ip.ospf.addSC("flood-reduction", "OSPF Flood Reduction"); subintBriC.ip.ospf.addSC("hello-interval", "Time between HELLO packets"); subintBriC.ip.ospf["hello-interval"].addSC("<1-65535>", "Seconds"); subintBriC.ip.ospf.addSC("message-digest-key", "Message digest authentication password (key)"); subintBriC.ip.ospf.addSC("mtu-ignore", "Ignores the MTU in DBD packets"); subintBriC.ip.ospf.addSC("network", "Network type"); subintBriC.ip.ospf.addSC("priority", "Router priority"); subintBriC.ip.ospf.addSC("retransmit-interval", "Time between retransmitting lost link state advertisements"); subintBriC.ip.ospf.addSC("transmit-delay", "Link state transmit delay"); subintBriC.ip.addSC("pgm", "PGM Reliable Transport Protocol"); subintBriC.ip.addSC("pim", "PIM interface commands"); subintBriC.ip.addSC("policy", "Enable policy routing"); subintBriC.ip.addSC("probe", "Enable HP Probe support"); subintBriC.ip.addSC("proxy-arp", "Enable proxy ARP"); subintBriC.ip.addSC("rarp-server", "Enable RARP server for static arp entries"); subintBriC.ip.addSC("redirects", "Enable sending ICMP Redirect messages"); subintBriC.ip.addSC("rgmp", "Enable/disable RGMP"); subintBriC.ip.addSC("rip", "Router Information Protocol"); subintBriC.ip.addSC("route-cache", "Enable fast-switching cache for outgoing packets"); subintBriC.ip.addSC("router", "IP router interface commands"); subintBriC.ip.addSC("rsvp", "RSVP interface commands"); subintBriC.ip.addSC("sap", "Session Announcement Protocol interface commands"); subintBriC.ip.addSC("security", "DDN IP Security Option"); subintBriC.ip.addSC("split-horizon", "Perform split horizon"); subintBriC.ip.addSC("summary-address", "Perform address summarization"); subintBriC.ip["summary-address"].addSC("eigrp", "Enhanced Interior Gateway Routing Protocol (EIGRP)"); subintBriC.ip["summary-address"].eigrp.addSC("<1-65535>", "Autonomous system number"); subintBriC.ip["summary-address"].eigrp["<1-65535>"].addSC("A.B.C.D", "IP address"); subintBriC.ip["summary-address"].eigrp["<1-65535>"]["A.B.C.D"].addSC("A.B.C.D", "IP network mask"); subintBriC.ip["summary-address"].eigrp["<1-65535>"]["A.B.C.D"]["A.B.C.D"].addSC("<1-255>", "Administrative distance"); subintBriC.ip["summary-address"].addSC("rip", "Routing Information Protocol (RIP)"); subintBriC.ip["summary-address"].rip.addSC("A.B.C.D", "IP address"); subintBriC.ip["summary-address"].rip["A.B.C.D"].addSC("A.B.C.D", "IP network mask"); subintBriC.ip.addSC("unnumbered", "Enable IP processing without an explicit address"); subintBriC.ip.addSC("unreachables", "Enable sending ICMP Unreachable messages"); subintBriC.ip.addSC("urd", "Configure URL Rendezvousing"); subintBriC.ip.addSC("verify", "Enable per packet validation"); subintBriC.ip.addSC("vrf", "VPN Routing/Forwarding parameters on the interface"); subintBriC.ip.addSC("wccp", "WCCP interface commands"); subintBriC.addSC("isis", "IS-IS commands"); subintBriC.isis.addSC("adjacency-filter", "Filter IS-IS adjacencies"); subintBriC.isis.addSC("circuit-type", "Configure circuit type for interface"); subintBriC.isis.addSC("csnp-interval", "Set CSNP interval in seconds"); subintBriC.isis.addSC("hello", "Add padding to IS-IS hello packets"); subintBriC.isis.addSC("hello-interval", "Set Hello interval in seconds"); subintBriC.isis.addSC("hello-multiplier", "Set multiplier for Hello holding time"); subintBriC.isis.addSC("lsp-interval", "Set LSP transmission interval"); subintBriC.isis.addSC("mesh-group", "Set ISIS mesh group"); subintBriC.isis.addSC("metric", "Configure the metric for interface"); subintBriC.isis.addSC("password", "Configure the authentication password for interface"); subintBriC.isis.addSC("priority", "Set priority for Designated Router election"); subintBriC.isis.addSC("retransmit-interval", "Set per-LSP retransmission interval"); subintBriC.isis.addSC("retransmit-throttle-interval", "Set interface LSP retransmission interval"); subintBriC.isis.addSC("three-way-handshake", "Select Cisco or IETF three-way handshake"); subintBriC.addSC("iso-igrp", "ISO-IGRP interface subcommands"); subintBriC["iso-igrp"].addSC("adjacency-filter", "Filter ISO-IGRP adjacencies"); subintBriC.addSC("lat", "LAT commands"); subintBriC.lat.addSC("enabled", "Enable LAT protocol translation"); subintBriC.lat.addSC("host", "Statically define LAT services"); subintBriC.addSC("llc2", "LLC2 Interface Subcommands"); subintBriC.llc2.addSC("N2", "Number of times router should retry various operations"); subintBriC.llc2.addSC("ack-delay-time", "Max time the router allows incoming I-frames to stay unacknowledged"); subintBriC.llc2.addSC("ack-max", "Max number of I-frames received before an acknowledgment must be sent"); subintBriC.llc2.addSC("adm-timer-value", "How long router waits in ADM before giving up."); subintBriC.llc2.addSC("dynwind", "Congestion control with dynamic window"); subintBriC.llc2.addSC("idle-time", "Frequency of polls during periods of idle traffic"); subintBriC.llc2.addSC("local-window", "Max number of I-frames to send before waiting for an acknowledgment"); subintBriC.llc2.addSC("t1-time", "How long router waits for an acknowledgment to transmitted I-frames"); subintBriC.llc2.addSC("tbusy-time", "Amount of time router waits while the other LLC2 station is in a busy state before attempting to poll the remote station"); subintBriC.llc2.addSC("tpf-time", "Amount of time router waits for a final response to a poll frame before re-sending the original poll frame"); subintBriC.llc2.addSC("trej-time", "Amount of time router waits for a resend of a rejected frame before sending the reject command"); subintBriC.llc2.addSC("txq-max", "Queue for holding llc2 information frames"); subintBriC.llc2.addSC("xid-neg-val-time", "Frequency of exchange of identification (XID)"); subintBriC.llc2.addSC("xid-retry-time", "How long router waits for reply to XID"); subintBriC.addSC("mls", "mls sub/interface commands"); subintBriC.mls.addSC("rp", "rp"); subintBriC.addSC("mpls", "Configure MPLS interface parameters"); subintBriC.mpls.addSC("ip", "Configure dynamic MPLS forwarding for IP"); subintBriC.mpls.addSC("mtu", "Set tag switching Maximum Transmission Unit"); subintBriC.mpls.addSC("netflow", "Configure Egress Netflow Accounting"); subintBriC.mpls.addSC("traffic-eng", "Configure Traffic Engineering parameters"); subintBriC.addSC("mtu", "Set the interface Maximum Transmission Unit (MTU)"); subintBriC.mtu.addSC("<64-18000>", "MTU size in bytes"); subintBriC.addSC("netbios", "Use a defined NETBIOS access list or enable name-caching"); subintBriC.netbios.addSC("input-access-filter", "Access list filter on incoming messages"); subintBriC.netbios.addSC("output-access-filter", "Access list filter on outgoing messages"); subintBriC.addSC("no", "Negate a command or set its defaults"); subintBriC.no.addSC("appletalk", "Appletalk interface subcommands"); subintBriC.no.addSC("arp", "Set arp type (arpa, probe, snap) or timeout"); subintBriC.no.addSC("bandwidth", "Set bandwidth informational parameter"); subintBriC.no.addSC("bridge-group", "Transparent bridging interface parameters"); subintBriC.no.addSC("cdp", "CDP interface subcommands"); subintBriC.no.addSC("clns", "CLNS interface subcommands"); subintBriC.no.addSC("crypto", "Encryption/Decryption commands"); subintBriC.no.addSC("decnet", "Interface DECnet config commands"); subintBriC.no.addSC("delay", "Specify interface throughput delay"); subintBriC.no.addSC("description", "Interface specific description"); subintBriC.no.addSC("dspu", "Down Stream PU"); subintBriC.no.addSC("dxi", "ATM-DXI configuration commands"); subintBriC.no.addSC("encapsulation", "Set encapsulation type for an interface"); subintBriC.no.addSC("fras", "DLC Switch Interface Command"); subintBriC.no.addSC("ip", "Interface Internet Protocol config commands"); subintBriC.no.ip.addSC("access-group", "Specify access control for packets"); subintBriC.no.ip.addSC("accounting", "Enable IP accounting on this interface"); subintBriC.no.ip.addSC("address", "Set the IP address of an interface"); subintBriC.no.ip.address.addSC("A.B.C.D", "IP address"); subintBriC.no.ip.address["A.B.C.D"].addSC("A.B.C.D", "IP subnet mask"); subintBriC.no.ip.address["A.B.C.D"]["A.B.C.D"].addSC("secondary", "Make this IP address a secondary address"); subintBriC.no.ip.addSC("authentication", "authentication subcommands"); subintBriC.no.ip.addSC("bandwidth-percent", "Set EIGRP bandwidth limit"); subintBriC.no.ip.addSC("bgp", "BGP interface commands"); subintBriC.no.ip.addSC("broadcast-address", "Set the broadcast address of an interface"); subintBriC.no.ip.addSC("cef", "Cisco Express Fowarding interface commands"); subintBriC.no.ip.addSC("cgmp", "Enable/disable CGMP"); subintBriC.no.ip.addSC("dhcp", "Configure DHCP parameters for this interface"); subintBriC.no.ip.addSC("directed-broadcast", "Enable forwarding of directed broadcasts"); subintBriC.no.ip.addSC("dvmrp", "DVMRP interface commands"); subintBriC.no.ip.addSC("hello-interval", "Configures IP-EIGRP hello interval"); subintBriC.no.ip.addSC("helper-address", "Specify a destination address for UDP broadcasts"); subintBriC.no.ip.addSC("hold-time", "Configures IP-EIGRP hold time"); subintBriC.no.ip.addSC("igmp", "IGMP interface commands"); subintBriC.no.ip.addSC("irdp", "ICMP Router Discovery Protocol"); subintBriC.no.ip.addSC("load-sharing", "Style of load sharing"); subintBriC.no.ip.addSC("mask-reply", "Enable sending ICMP Mask Reply messages"); subintBriC.no.ip.addSC("mobile", "Mobile IP support"); subintBriC.no.ip.addSC("mrm", "Configure IP Multicast Routing Monitor tester"); subintBriC.no.ip.addSC("mroute-cache", "Enable switching cache for incoming multicast packets"); subintBriC.no.ip.addSC("mtu", "Set IP Maximum Transmission Unit"); subintBriC.no.ip.addSC("multicast", "IP multicast interface commands"); subintBriC.no.ip.addSC("nat", "NAT interface commands"); subintBriC.no.ip.addSC("nbar", "Network-Based Application Recognition"); subintBriC.no.ip.addSC("nhrp", "NHRP interface subcommands"); subintBriC.no.ip.addSC("ospf", "OSPF interface commands"); subintBriC.no.ip.addSC("pgm", "PGM Reliable Transport Protocol"); subintBriC.no.ip.addSC("pim", "PIM interface commands"); subintBriC.no.ip.addSC("policy", "Enable policy routing"); subintBriC.no.ip.addSC("probe", "Enable HP Probe support"); subintBriC.no.ip.addSC("proxy-arp", "Enable proxy ARP"); subintBriC.no.ip.addSC("rarp-server", "Enable RARP server for static arp entries"); subintBriC.no.ip.addSC("redirects", "Enable sending ICMP Redirect messages"); subintBriC.no.ip.addSC("rgmp", "Enable/disable RGMP"); subintBriC.no.ip.addSC("rip", "Router Information Protocol"); subintBriC.no.ip.addSC("route-cache", "Enable fast-switching cache for outgoing packets"); subintBriC.no.ip.addSC("router", "IP router interface commands"); subintBriC.no.ip.addSC("rsvp", "RSVP interface commands"); subintBriC.no.ip.addSC("sap", "Session Announcement Protocol interface commands"); subintBriC.no.ip.addSC("security", "DDN IP Security Option"); subintBriC.no.ip.addSC("split-horizon", "Perform split horizon"); subintBriC.no.ip.addSC("summary-address", "Perform address summarization"); subintBriC.no.ip.addSC("unnumbered", "Enable IP processing without an explicit address"); subintBriC.no.ip.addSC("unreachables", "Enable sending ICMP Unreachable messages"); subintBriC.no.ip.addSC("urd", "Configure URL Rendezvousing"); subintBriC.no.ip.addSC("verify", "Enable per packet validation"); subintBriC.no.ip.addSC("vrf", "VPN Routing/Forwarding parameters on the interface"); subintBriC.no.ip.addSC("wccp", "WCCP interface commands"); subintBriC.no.addSC("isis", "IS-IS commands"); subintBriC.no.addSC("iso-igrp", "ISO-IGRP interface subcommands"); subintBriC.no.addSC("lat", "LAT commands"); subintBriC.no.addSC("llc2", "LLC2 Interface Subcommands"); subintBriC.no.addSC("mls", "mls sub/interface commands"); subintBriC.no.addSC("mpls", "Configure MPLS interface parameters"); subintBriC.no.addSC("mtu", "Set the interface Maximum Transmission Unit (MTU)"); subintBriC.no.addSC("netbios", "Use a defined NETBIOS access list or enable name-caching"); subintBriC.addSC("ntp", "Configure NTP"); subintBriC.ntp.addSC("broadcast", "Configure NTP broadcast service"); subintBriC.ntp.addSC("disable", "Disable NTP"); subintBriC.ntp.addSC("multicast", "Configure NTP multicast service"); subintBriC.addSC("pulse-time", "Force DTR low during resets"); subintBriC["pulse-time"].addSC("<0-60>", "DTR low time in seconds"); subintBriC.addSC("rate-limit", "Rate Limit"); subintBriC["rate-limit"].addSC("input", "Rate limit on input"); subintBriC["rate-limit"].addSC("output", "Rate limit on output"); subintBriC.addSC("service-policy", "Configure QoS Service Policy"); subintBriC["service-policy"].addSC("history", "Keep history of QoS metrics"); subintBriC["service-policy"].addSC("input", "Assign policy-map to the input of an interface"); subintBriC["service-policy"].addSC("output", "Assign policy-map to the output of an interface"); subintBriC.addSC("shutdown", "Shutdown the selected interface"); subintBriC.addSC("smds", "Modify SMDS parameters"); subintBriC.smds.addSC("address", "Set an interface SMDS address"); subintBriC.smds.addSC("enable-arp", "Enable ARP processing."); subintBriC.smds.addSC("glean-mode", "SMDS GLEAN mode"); subintBriC.smds.addSC("multicast", "Set an SMDS multicast (or broadcast) address"); subintBriC.smds.addSC("static-map", "Map high level protocol address to SMDS address"); subintBriC.addSC("smrp", "Simple Multicast Routing Protocol interface subcommands"); subintBriC.smrp.addSC("mroute-cache", "Enable SMRP route cache"); subintBriC.smrp.addSC("protocol", "Specify network layer service protocol"); subintBriC.addSC("sna", "SNA pu configuration"); subintBriC.sna.addSC("enable-host", "SNA Enable Host command"); subintBriC.sna.addSC("start", "SNA Start command"); subintBriC.addSC("snapshot", "Configure snapshot support on the interface"); subintBriC.snapshot.addSC("client", "Enable client control of Snapshot routing"); subintBriC.snapshot.addSC("server", "Send routing updates out this link when updates are received"); subintBriC.addSC("tag-switching", "Tag Switching interface configuration commands"); subintBriC["tag-switching"].addSC("ip", "Configure IP dynamic Tag Switching"); subintBriC["tag-switching"].addSC("mtu", "Set tag switching Maximum Transmission Unit"); subintBriC.addSC("tarp", "TARP interface subcommands"); subintBriC.tarp.addSC("enable", "Enable TARP on interface"); subintBriC.tarp.addSC("propagate", "Enable propagation of TARP PDU's out on this interface"); subintBriC.tarp.addSC("split-horizon", "Enable split horizon for TARP propagation on this interface"); subintBriC.addSC("timeout", "Define timeout values for this interface"); subintBriC.timeout.addSC("absolute", "Define session timeout value for this interface"); subintBriC.addSC("vines", "VINES interface subcommands"); subintBriC.vines.addSC("access-group", "Apply a VINES access list"); subintBriC.vines.addSC("arp-enable", "Supply VINES addresses to booting clients"); subintBriC.vines.addSC("encapsulation", "VINES encapsulation"); subintBriC.vines.addSC("input-network-filter", "Filter networks in received routing updates"); subintBriC.vines.addSC("input-router-filter", "Filter source of received routing updates"); subintBriC.vines.addSC("metric", "VINES processing on the selected interface"); subintBriC.vines.addSC("neighbor", "Create a static neighbor entry"); subintBriC.vines.addSC("output-network-filter", "Filter networks sent in routing updates"); subintBriC.vines.addSC("propagate", "Ignore 'class' field during broadcast forwarding"); subintBriC.vines.addSC("redirect", "Set redirect interval"); subintBriC.vines.addSC("route-cache", "Fast switch VINES packets out this interface"); subintBriC.vines.addSC("serverless", "The attached network has no Banyan server"); subintBriC.vines.addSC("split-horizon", "Split-horizon routing updates"); subintBriC.vines.addSC("update", "Set RTP update characteristics for this interface"); subintBriC.addSC("xns", "XNS interface subcommands"); subintBriC.xns.addSC("access-group", "Apply an access list to output packets"); subintBriC.xns.addSC("encapsulation", "Set encapsulation method for XNS packets"); subintBriC.xns.addSC("flood", "Flood XNS packets"); subintBriC.xns.addSC("hear-rip", "Listen to RIP updates"); subintBriC.xns.addSC("helper-address", "Forward broadcasts to a specific address"); subintBriC.xns.addSC("input-network-filter", "Filter incoming routing updates"); subintBriC.xns.addSC("network", "Assign an XNS network & enable XNS routing"); subintBriC.xns.addSC("output-network-filter", "Filter outgoing routing updates"); subintBriC.xns.addSC("route-cache", "Enable fast switching"); subintBriC.xns.addSC("router-filter", "Filter sources of routing updates"); subintBriC.xns.addSC("update-time", "Set XNS routing update timer");