Service Tool Installation Instructions

Document Revision 1.0

Table of Contents

• Prerequisites

The following procedures assume the user has basic computer skills. Basic computer skills are defined as knowing how Windows Operating system works and being able to navigate the file system (copying, moving, locating, renaming, removing software and files, etc.) either through Windows Explorer or My Computer. Also, the user understands common PC terminology.

• Installing PC Service Tool for First Time

The following procedure assumes the user has downloaded the software from TRD and saved it on the PC (notebook computer) hard drive.

1. Find the setup.exe for the PC Service Tool file saved earlier on the hard drive.

2. Using the mouse, double click on the file name.

3. Follow the prompts on the screen.

4. Reboot PC

5. Proceed to Ifak drive installation

• Upgrading PC Service Tool from Training Version

1. Using the Add/Remove Programs from the Control Panel, locate the PC Service Tool from the list of software and click Remove.

2. Reboot PC

3. Proceed to Installing PC Service Tool for the First Time

• Upgrading PC Service Tool from Version 1.0 or later

Follow procedure for Installing PC Service Tool for the first time, number 1 through 4.

• Installing Software Patch

The following procedure assumes the user has downloaded the software from TRD and saved it on the PC (notebook computer) hard drive.

1. Find the patch.exe for the PC Service Tool file saved earlier on the hard drive.

2. Using the mouse, double click on the file name.

3. Follow the prompts on the screen.

4. Reboot PC

• Installing Ifak Driver

1. Unplug any Ifak devices from the PC

2. If an Ifak driver is already installed, remove the drivers by using the Add/Remove Programs from the Control Panel, locate the “is CAN Multidriver” from the list of software and click Remove.

3. Reboot PC

5. Find the setup.exe for the Ifak driver saved earlier on the hard drive.

6. Using the mouse, double click on the file name.

7. Follow the prompts on the screen.

8. Reboot PC

9. Plug Ifak device into USB port on PC

10. When windows installer opens, choose next/continue until finished

11. Run C:\Program Files\ifak system\is CAN Multidriver\bin\is CAN Configurator

12. Click the Add button

13. Choose PCI and click OK

14. Highlight device 0

15. Click Search attached device

16. Highlight the serial number of the unit in the new window and click OK

17. Click OK to close the configurator

18. Reboot PC

• Installing Troubleshooting Manual

When downloading the trouble shooting manual from TRD, save as and rename the file to TroubleshootingManual-EN.pdf. Save to the C:\Program Files\......\PC Service Tool\Docs

---