Use the following board and bracket

* Build the combined instrument and remove the rear Plastic cover.
* Clips off the engines and pull the board. Make sure that the engines are loose, and none of the needles will be deducted!
* Locate the 8 pin connector chip 93C46.
* Find the quartz in the vicinity of the chip and bridged it.
* Connect the clip to Port 0
* Set the bracket on the chip 93C46 (red on pin 1).
* Select the DIGA-Consult-Citroen Xsara
* The DIGA-Consult shows you the old Kilometers to.
* Select menu, KM others.
* Enter the new KM-stand.
* Confirm the new KM-stand with OK.

---