Mittelteil

Band	a (Rohr-Aufsteck)	b (Distanz)	c (Spule)	d (Mittelteil	Gesamtlänge
80m	25mm (20mm aD)	10mm (20mm aD)	258 Wdg. dicht Koppelwicklung
40m	25mm (18mm aD)	10mm (20mm aD)	114 Wdg. dicht 470pF
30m	25mm (18mm aD)	10mm (20mm aD)	71 Wdg. dicht 330pF
20m	25mm (18mm aD)	10mm (20mm aD)	45mm (18,5mm aD) 47 Wdg. dicht 220pF	70mm (20mm aD)	230mm
17m	25mm (18mm aD)	10mm (20mm aD)	35 Wdg. dicht 220pF
15m	25mm (18mm aD)	10mm (20mm aD)
12m	25mm (18mm aD)	10mm (20mm aD)
11m	25mm (18mm aD)	10mm (20mm aD)
10m	25mm (18mm aD)	10mm (20mm aD)

Strahler

Band	radiator	tune
80m	1600mm (20mm iD)
40m	700mm (18mm iD)
30m	500mm (18mm iD)
20m	350mm (18mm iD)	18cm (6mm D)
17m	300mm (18mm iD)
15m
12m
11m
10m

Polyamid-Stopfenstück mit entsprechendem Rohr-Innendurchmesser und 6mm Bohrung zur Aufnahme des Tune-Abstimmstabes.

Länge rd. 2,5cm.

Disclaimer • Disclaimer of liability

This modifications mostly need to be done by a electronic specialist who had enough practise and who has knowledge in SMD soldering. You do the modifications on your own risk !

Radio modifications shown here are provided for properly licensed operators only! The user is solely responsible for making sure that any modifications made to the radio unit must meet all Federal and State Regulations or the Country of use! Liability of damages to any equipment is the sole responsibility of the user! Downloading , viewing, or using any information provided on these pages automatically accepts the user to the terms of this agreement! Modifications are provided for information purposes only!

Although the greatest care has been taken while compiling these documents, we cannot guarantee that the instructions will work on every radio presented.

Copyright
The author intended not to use any copyrighted material for the publication or, if not possible, to indicate the copyright of the respective object. The copyright for any material created by the author is reserved. Any duplication or use of objects such as diagrams, sounds or texts in other electronic or printed publications is not permitted without the author's agreement.

Some circuit details are password-protected because of legal reasons. Please contact me via e-mail.

If your company would like to provide technical information to be featured on this pages please contact me at: [e-mail] .

KGD-Dipol

last modified: 19. Mrz. 2005 / page 1

© 03/2005 Jochen Heilemann, DG2IAQ Phone: [phone]

Jochen Heilemann Reihenbaumweg 1 Fax: [phone]

All rights reserved. D-75223 Niefern-Öschelbronn Germany e-Mail: [e-mail]

---