09

^ l_j http://assessment.netacad.netv^,virtuoso/deli\'ery/pub-doc/exam.shtml

r-au/4

Host A 10.1.5.1/24 VLAN 5

Host B 10.1.5.2/24 VLAN 5

hau/4

Host C 10.1.50.1/24 VLAN 50

Host D 10.1.5.3/24 VLAN 5

Switchl(config)# interface FastEthernet 0/4 Switchl(config-if)# switchport trunk encapsulation dot1q Switchl (config-if)# switchport modę dynamie auto

Switch2(config)# interface FastEthernet 0/4 Switch2(config-if)# switchport trunk encapsulation dot1q Switch2(config-if)# switchport modę dynamie auto

Cr

Refer to the exhibit. The exhibited configurations do not allow the switches to form a trunk. What is the most likely C3use of this problem?

O Cisco switches only supportthe ISL trunking protocol.

O The trunk cannot be negoti3ted with both ends set to auto.

O By default. Switchl will only allow VLAN 5 across the link.

O A common native VLAN should have been configured on the switches.

19

What statementaboutthe 802.1 q trunking protocol istrue?

O 802.1q is Cisco propriet3ry.

O 802.1qframes 3re mappedto VLANs by MAC 3ddress.

O 802.1q does NOT require the FCS of the original frame to be recalculated.

O 802.1 q will not perform operations on fr3mes that are forwarded out 3ccess ports.

20

What switch port modes will allow a switch to successfullyform a trunking link if the neighboring switch port is in "dynamie desirable' modę?

O dynamie desirable modę O on or dynamie desirable modę O on. auto. or dynamie desirable modę O on. auto. dynamie desirable. or nonegoti3te modę

I0 Zakończono

|Q Menedżer zadań Wind... \T 08. JPG - Paint